5 Things you shouldnt do in a manual car

UNKNOWN_370 · 02-10-2016, 10:02 AM

Great vid! Helpful for novices. Thought it a worthy post!

https://youtu.be/_cbZlhduYJY

mishuko · 02-10-2016, 10:12 AM

I like how he's using a Z. thanks for the vid!

SouthArk370Z · 02-10-2016, 11:11 AM

Good info for new manual drivers.

( Click to show/hide )

UNKNOWN_370 · 02-10-2016, 11:35 AM

Most people I know are guilty of putting pressure on the stick & poor hill starts... Most rock back and forth on the incline till the light changes.

JARblue · 02-10-2016, 11:51 AM

Good info

Didn't know it was bad to lug the engine though. Yes, I understand the gearing disadvantage and poor gas mileage. But if you're not looking to accelerate fast, is it really hurting anything? If so, what specifically?

I like my exhaust note when I roll into the throttle pretty heavy around 2K RPMs. I'm not going WOT or anything, but I am deliberately giving it more throttle than is necessary.

wideglideleon · 02-10-2016, 12:20 PM

I'm not sure it's bad for our modern engines, since they are computer controlled.

birdman71 · 02-10-2016, 12:50 PM

Stalling is a bad thing to do too..

onzedge · 02-10-2016, 12:52 PM

Quote:

Originally Posted by UNKNOWN_370

Great vid! Helpful for novices. Thought it a worthy post!

https://youtu.be/_cbZlhduYJY

JARblue · 02-10-2016, 01:28 PM

Quote:

Originally Posted by birdman71

Stalling is a bad thing to do too..

A nice clutch-kick can be fun, though

mishuko · 02-10-2016, 01:40 PM

Quote:

Originally Posted by JARblue

Good info

Didn't know it was bad to lug the engine though. Yes, I understand the gearing disadvantage and poor gas mileage. But if you're not looking to accelerate fast, is it really hurting anything? If so, what specifically?

I like my exhaust note when I roll into the throttle pretty heavy around 2K RPMs. I'm not going WOT or anything, but I am deliberately giving it more throttle than is necessary.

always wondered about that... I do that too... maybe going like cruising in a gear then add gas because deep growl vroom.

Quote:

Originally Posted by birdman71

Stalling is a bad thing to do too..

it's not bad just embaressing

JARblue · 02-10-2016, 01:45 PM

Quote:

Originally Posted by mishuko

it's not bad just embaressing

Sure it's bad... do it enough and you'll wear out your clutch prematurely. One stall isn't going to cause much wear. But it'll add up over time.

Same with holding your hand on the shifter in between shifts for a few seconds. That few seconds isn't going to cause much wear either. But it adds up a lot quicker when you rest your hand on the shifter constantly.

MB370Z · 02-10-2016, 01:47 PM

Is granny shifting and double clutching OK?

JARblue · 02-10-2016, 01:48 PM

Quote:

Originally Posted by MB370Z

Is granny shifting and double clutching OK?

One is ok. The other is not.

KngScottieV · 02-10-2016, 01:54 PM

Quote:

Originally Posted by MB370Z

Is granny shifting and double clutching OK?

Absolutely!

As long as your car is so old it doesn't have syncros. Or like my truck where the 1st - 2nd syncro is **** so I have to double clutch into it, or it grinds like hell. It's **** because the slave cylinder died while I was about 100 miles from anywhere, no clutch and had to rev match gears everywhere. I got pretty good at it though, but 1st to 2nd was hard on me and that transmission.

mishuko · 02-10-2016, 02:05 PM

when my transmission is cold i double clutch and find it moves into the gears a lot more easily. especially the 1-2 shift..

02-10-2016, 10:02 AM	#1 (permalink)
UNKNOWN_370 A True Z Fanatic Join Date: Jul 2009 Location: ny'r livn in tx Posts: 8,687 Drives: well over 130m.p.h. Rep Power: 14857	5 Things you shouldnt do in a manual car Great vid! Helpful for novices. Thought it a worthy post! https://youtu.be/_cbZlhduYJY jaytirbhaw, onzedge, VABAM and 6 others like this. __________________ Favorite Quote. "I'm not gonna kill you... I'm just gonna Bash Your Face In" Jack Nicholson-"The Shining". 1980

02-10-2016, 10:12 AM	#2 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9434	I like how he's using a Z. thanks for the vid! UNKNOWN_370 likes this.

02-10-2016, 11:11 AM	#3 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Good info for new manual drivers. ( Click to show/hide ) One doesn't have any of those worries with an auto. UNKNOWN_370 likes this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

02-10-2016, 11:35 AM	#4 (permalink)
UNKNOWN_370 A True Z Fanatic Join Date: Jul 2009 Location: ny'r livn in tx Posts: 8,687 Drives: well over 130m.p.h. Rep Power: 14857	Most people I know are guilty of putting pressure on the stick & poor hill starts... Most rock back and forth on the incline till the light changes. __________________ Favorite Quote. "I'm not gonna kill you... I'm just gonna Bash Your Face In" Jack Nicholson-"The Shining". 1980

02-10-2016, 11:51 AM	#5 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Good info Didn't know it was bad to lug the engine though. Yes, I understand the gearing disadvantage and poor gas mileage. But if you're not looking to accelerate fast, is it really hurting anything? If so, what specifically? I like my exhaust note when I roll into the throttle pretty heavy around 2K RPMs. I'm not going WOT or anything, but I am deliberately giving it more throttle than is necessary. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-10-2016, 12:20 PM	#6 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	I'm not sure it's bad for our modern engines, since they are computer controlled.

02-10-2016, 12:50 PM	#7 (permalink)
birdman71 A True Z Fanatic Join Date: Apr 2015 Location: Los Angeles, CA Posts: 1,579 Drives: People Crazy! Rep Power: 40	Stalling is a bad thing to do too.. __________________ *Birdman's Build:* Powerhouse Amuse/ Nismo/ Eibach/ ACT/ Tommy Kaira/ Avant Garde/ Fast Intentions/ Project Kics/ Fly 1 Motorsports/ EVO-R/ Z1 Motorsports/ Weber Sports/ Zoom/ Zele Japan

02-10-2016, 01:47 PM	#12 (permalink)
MB370Z Enthusiast Member Join Date: Aug 2009 Location: Marrero, LA Posts: 329 Drives: 09 370Z Rep Power: 357	Is granny shifting and double clutching OK? JARblue, Dsevast and BC416 like this.

02-10-2016, 02:05 PM	#15 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9434	when my transmission is cold i double clutch and find it moves into the gears a lot more easily. especially the 1-2 shift..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Things not to do to your Z	eXo5	Nissan 370Z General Discussions	181	03-28-2018 11:25 PM
[WTB] New or used, looking to buy some things	hyunsoo1803	Parts for sale (Private Classifieds)	2	07-31-2012 02:47 AM
What are these things?!!!	SophiaZ	Exterior & Interior	7	01-17-2010 02:11 AM