Question

Deniz · 07-03-2015, 10:59 PM

Quote:

Originally Posted by Z_ealot

May want to check and see if they have a carfax on either of them also, at some point the engine might have heen replaced on one of them....i recently picked up an 09 myself in the same color except for black leather interior and discovered that it had it's engine replaced back in 2011 at slightly less than 24,000 miles. Havent had one issue with the engine thankfully, but made me glad i opted to purchase the extended warranty the dealer offered. Oh and the production numbers i quoted are the real deal, there is a member on here that works for nissan and he was kind enough to make a tool to look up production numbers for the Z, just do a google search for 370Z production statistics and it will be the first result

Oh yes one of the first things I look at lol, thanks for the info

Sent from my SM-G900T using Tapatalk

scorp38 · 07-04-2015, 12:10 AM

A new motor is definitely not a bad thing though less miles and at least you know it probably won't have the oil consumption issues

Sent from my iPhone using Tapatalk

UNKNOWN_370 · 07-04-2015, 01:16 AM

Quote:

Originally Posted by Deniz

Well there are 2 of them in that color combo available, ones fully loaded with 35k miles the other just doesnt have audio display and has 21k miles, both are 2009 thats why idk if I should go with it since they are 09's

Sent from my SM-G900T using Tapatalk

I liked my 09 better. It sounded more raw and seemed to accelerate mildly faster than my current 11. My only issue was I had a Lil bit of axle slack, so on hard take offs, you hear this loud *** bang!!! The spring rates are mildly stiffer as the 11 spring rates were mildly softened for comfort.

There were some cars with ECU whine, but Nissan can flash the ECU to fix it. Fuel starve exists till this day. Oil consumption..... Hmm lots of guys got new engines with those types of chronic issues sooooooo, I doubt you'll run into that. No heated mirrors. CSC existed then of course. I think you're good.

nis350 · 07-04-2015, 02:06 AM

I too was color specific when shopping for my Z (pw/orange/full loaded/6 sp). I had a hard time looking for mine and I imagine your combo is even harder. So if that's your only combo, then i wouldn't mind going with the 09 even though it lacks certain options. As far as the oil cooler and steering wheel lock... it is ok w/o the oil cooler if you don't track the car and the steering wheel lock is probably replaced with the latest version by now or you can always pull the fuse.

you also save a few bucks being an older model. I'd say go for it if it checks out well. MB/PW is a very nice combo.

Quote:

Originally Posted by Deniz

Hi everyone, about 7 months ago I purchased a 2011 370z Monterey blue with that orangish interior, with only 4900 miles. It was perfect, unfortunately an inexperienced driver failed to yield the right of way, made a turn hit into me and my car landed on its side, and the cars totalled. I am getting money back from insurance but its so hard to find the same car with the same options (Fully loaded) I did find one though, everything is pretty much the same but its a 2009 model. Since that was the first year they made that car is there anything different that I have to watch out for maybe defects or problems compared to a 2011? Thanks.

Sent from my SM-G900T using Tapatalk

2011 Nismo#91 · 07-06-2015, 08:29 AM

I don't know where people are getting oil starvation from, that has only been an issue for dedicated track cars so far. I can only assume they mean oil CONSUMPTION. The '11 steering lock was updated but still can fail. '11s don't have an oil cooler, and the CSC is a problem for all manuals. '12s were the first year where there were any changes worthy of note.

Deniz · 07-06-2015, 08:34 AM

Quote:

Originally Posted by 2011 Nismo#91

I don't know where people are getting oil starvation from, that has only been an issue for dedicated track cars so far. I can only assume they mean oil CONSUMPTION. The '11 steering lock was updated but still can fail. '11s don't have an oil cooler, and the CSC is a problem for all manuals. '12s were the first year where there were any changes worthy of note.

Well then, I didnt know this....and whats a CSC?

Sent from my SM-G900T using Tapatalk

sx moneypit · 07-06-2015, 08:58 AM

CSC-clutch slave cylinder

scorp38 · 07-06-2015, 08:59 AM

Z1 makes the external slave cylinder so this is really not an issue if you don't mind forking over some $450 for a much better slave cylinder.

Sent from my iPhone using Tapatalk

scorp38 · 07-06-2015, 09:20 AM

Z1 makes the external slave cylinder so this is really not an issue if you don't mind forking over some $450 for a much better slave cylinder.

Sent from my iPhone using Tapatalk

Z_ealot · 07-06-2015, 01:40 PM

Quote:

Originally Posted by scorp38

Z1 makes the external slave cylinder so this is really not an issue if you don't mind forking over some $450 for a much better slave cylinder.

Sent from my iPhone using Tapatalk

the guys over at corner3 garage didnt seem to impressed with the build quality on that Z1 part....and now im back on the fence of whether i should just get the zspeed hd csc or ignore them and go with the Z1 part anyway

JARblue · 07-06-2015, 01:53 PM

Quote:

Originally Posted by Z_ealot

the guys over at corner3 garage didnt seem to impressed with the build quality on that Z1 part....and now im back on the fence of whether i should just get the zspeed hd csc or ignore them and go with the Z1 part anyway

What are they talking about?

The build quality is fine. Mike The Powdercoater has tons of track time on his. Not to mention, the cylinder itself is easily replaced and only costs $60 if something happens (I haven't heard of anyone needing to replace it yet). My favorite benefit is the fact that I never again will have to drop the transmission if I have problems with the slave

scorp38 · 07-06-2015, 03:06 PM

Quote:

Originally Posted by Z_ealot

the guys over at corner3 garage didnt seem to impressed with the build quality on that Z1 part....and now im back on the fence of whether i should just get the zspeed hd csc or ignore them and go with the Z1 part anyway

Interesting pretty much everyone on the forum that I know have it say nothing but good things about the z1 csc elimination kit.

Sent from my iPhone using Tapatalk

Z_ealot · 07-06-2015, 04:04 PM

Quote:

Originally Posted by JARblue

What are they talking about?

The build quality is fine. Mike The Powdercoater has tons of track time on his. Not to mention, the cylinder itself is easily replaced and only costs $60 if something happens (I haven't heard of anyone needing to replace it yet). My favorite benefit is the fact that I never again will have to drop the transmission if I have problems with the slave

sorry to threadjack, but about how hard would you say it is installing the Z1 part and also, would you have to replace the master cylinder? only reason i ask is because i was quoted $900 for installing a clutch kit and the Z1 part and was wondering if that price seemed alright to you guys.

JARblue · 07-06-2015, 04:14 PM

Quote:

Originally Posted by Z_ealot

sorry to threadjack, but about how hard would you say it is installing the Z1 part and also, would you have to replace the master cylinder? only reason i ask is because i was quoted $900 for installing a clutch kit and the Z1 part and was wondering if that price seemed alright to you guys.

If you're doing it on jack stands in your garage, I can attest that it is a pain in the a$$. It took me two full days with knowledgeable help. If you've got access to a lift, have the tools, and have some experience, it will probably be much less of a pain. Absolutely replace the master cylinder at the same time. That $900 figure seems a bit high to me, but it's not so high that locations with higher shop rates wouldn't be in that ballpark. We have $80-90/hr rates around here, so transmission labor should be closer to $500-600. But if shop rates near you are pushing $120 like they can in some parts of the country, then $900 might be a decent price. Figure book rate is seven hours of labor or so.

07-04-2015, 12:10 AM	#17 (permalink)
scorp38 Enthusiast Member Join Date: Apr 2014 Location: Washington Posts: 360 Drives: 09 370z 6mt Rep Power: 12	A new motor is definitely not a bad thing though less miles and at least you know it probably won't have the oil consumption issues Sent from my iPhone using Tapatalk Z_ealot likes this. __________________ 1989 300zx Turbo 5mt Moonglow pearl white 2009 370z sport/touring 6mt Magnetic blk

07-06-2015, 08:59 AM	#23 (permalink)
scorp38 Enthusiast Member Join Date: Apr 2014 Location: Washington Posts: 360 Drives: 09 370z 6mt Rep Power: 12	Z1 makes the external slave cylinder so this is really not an issue if you don't mind forking over some $450 for a much better slave cylinder. Sent from my iPhone using Tapatalk __________________ 1989 300zx Turbo 5mt Moonglow pearl white 2009 370z sport/touring 6mt Magnetic blk

07-06-2015, 09:20 AM	#24 (permalink)
scorp38 Enthusiast Member Join Date: Apr 2014 Location: Washington Posts: 360 Drives: 09 370z 6mt Rep Power: 12	Z1 makes the external slave cylinder so this is really not an issue if you don't mind forking over some $450 for a much better slave cylinder. Sent from my iPhone using Tapatalk __________________ 1989 300zx Turbo 5mt Moonglow pearl white 2009 370z sport/touring 6mt Magnetic blk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Newbie Question... smart key question	ellebycul	New Forum Member	3	05-01-2011 05:04 PM

07-06-2015, 08:29 AM	#20 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,385 Drives: slowly Rep Power: 40569	I don't know where people are getting oil starvation from, that has only been an issue for dedicated track cars so far. I can only assume they mean oil CONSUMPTION. The '11 steering lock was updated but still can fail. '11s don't have an oil cooler, and the CSC is a problem for all manuals. '12s were the first year where there were any changes worthy of note.

07-06-2015, 08:58 AM	#22 (permalink)
sx moneypit Premium Member Join Date: Oct 2014 Location: Memphis,Tn. Age: 67 Posts: 3,285 Drives: 2010 370Z PG 6 spd Rep Power: 2684370	CSC-clutch slave cylinder