Update on my mods/car.

cranzy · 06-05-2015, 03:31 PM

Hi guys, as some of you know I've been a member of this forum for a few months now, yet I have only 1 picture of my car. Recently I've installed a new exhaust(TOMEI Ex Ti) and Mishimoto oil cooler(yes, I'm going to a local track) and decided that I should post a few pictures of the mods. Don't hate

Mishimoto Oil Cooler

Tomei Expreme Ti

p.s. I didn't know where to post this thread, feel free to move it if needed.

1st · 06-05-2015, 04:12 PM

New mods are always fun! Looks good!

cranzy · 06-05-2015, 04:20 PM

Quote:

Originally Posted by 1st

New mods are always fun! Looks good!

Thanks man!

NRTim · 06-05-2015, 04:30 PM

Is that Tomei exhaust 3" piping?

Btw nice mods and nice car

cranzy · 06-05-2015, 04:53 PM

Quote:

Originally Posted by NRTim

Is that Tomei exhaust 3" piping?

Btw nice mods and nice car

Honestly, I think it's even close to 3.2", so yes.
Thanks!

JARblue · 06-05-2015, 05:12 PM

Good stuff

BUT ...

I sure hope you did not use the miSHITmoto thermostatic plate. They are known to fail and dump 5 quarts of oil while you're driving down the road

They will send you a replacement o-ring if this happens, but I think you're on your own with the blown motor

cranzy · 06-05-2015, 05:26 PM

Quote:

Originally Posted by JARblue

Good stuff

BUT ...

I sure hope you did not use the miSHITmoto thermostatic plate. They are known to fail and dump 5 quarts of oil while you're driving down the road

They will send you a replacement o-ring if this happens, but I think you're on your own with the blown motor

Thanks.
Honestly, I got the simple(non thermostatic) plate by a mistake. This is the first time I hear that Mishimoto thermostatic plates have problems. Does that mean I got lucky for buying the dull version? Lol

JARblue · 06-05-2015, 05:28 PM

Quote:

Originally Posted by cranzy

Thanks.
Honestly, I got the simple(non thermostatic) plate by a mistake. This is the first time I hear that Mishimoto thermostatic plates have problems. Does that mean I got lucky for buying the dull version? Lol

Yes. Very.

Get the Mocal if you ever need the thermostatic plate.

cranzy · 06-05-2015, 05:31 PM

Quote:

Originally Posted by JARblue

Yes. Very.

Get the Mocal if you ever need the thermostatic plate.

Great. It's 3x more expensive than the mishimoto one, but if it's going to save me from blown engine, then it's worth it.

JARblue · 06-05-2015, 05:32 PM

Quote:

Originally Posted by cranzy

Great. It's 3x more expensive than the mishimoto one, but if it's going to save me from blown engine, then it's worth it.

cranzy · 06-05-2015, 05:34 PM

Quote:

Originally Posted by JARblue

I lied. The mishimoto thermostatic is 160$ lol

JARblue · 06-05-2015, 05:40 PM

Quote:

Originally Posted by cranzy

I lied. The mishimoto thermostatic is 160$ lol

Even more reason not to buy it lol... Z1 has a kit with fittings and everything to connect up to the NISMO oil cooler kit. With the Mocal and fittings and everything its only $150 http://www.z1motorsports.com/g37_370...oducts_id=4652

FairladyZ10PG · 06-05-2015, 05:54 PM

Nice work!

cranzy · 06-05-2015, 06:00 PM

Quote:

Originally Posted by FairladyZ10PG

Nice work!

Thanks FairladyZ10PG.

Hey, did anyone notice my K&N filters? Are they dirty or yeah?

FairladyZ10PG · 06-05-2015, 07:09 PM

^I though you might have powdercoated'em to match your stillen intakes lol

06-05-2015, 03:31 PM	#1 (permalink)
cranzy Base Member Join Date: Mar 2015 Location: Seattle Posts: 108 Drives: 370z Rep Power: 10	Update on my mods/car. Hi guys, as some of you know I've been a member of this forum for a few months now, yet I have only 1 picture of my car. Recently I've installed a new exhaust(TOMEI Ex Ti) and Mishimoto oil cooler(yes, I'm going to a local track) and decided that I should post a few pictures of the mods. Don't hate Mishimoto Oil Cooler Tomei Expreme Ti p.s. I didn't know where to post this thread, feel free to move it if needed. GaleForce, ZeroZeta and Memphis370Z like this. Last edited by cranzy; 06-05-2015 at 03:35 PM.

06-05-2015, 04:12 PM	#2 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,708 Drives: Platinum Z Rep Power: 1615	New mods are always fun! Looks good! cranzy likes this.

06-05-2015, 05:12 PM	#6 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Good stuff BUT ... I sure hope you did not use the miSHITmoto thermostatic plate. They are known to fail and dump 5 quarts of oil while you're driving down the road They will send you a replacement o-ring if this happens, but I think you're on your own with the blown motor __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

06-05-2015, 05:54 PM	#13 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 254	Nice work! __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

06-05-2015, 07:09 PM	#15 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 254	^I though you might have powdercoated'em to match your stillen intakes lol __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

06-05-2015, 04:30 PM	#4 (permalink)
NRTim Base Member Join Date: Aug 2009 Location: Nowhere,TX Age: 37 Posts: 131 Drives: 2017 ??? Rep Power: 15	Is that Tomei exhaust 3" piping? Btw nice mods and nice car

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JP Lip update	mspeasl	Exterior & Interior	10	07-12-2010 04:26 PM
Sat Nav update	KiddAdelaide	Australia/New Zealand	2	06-23-2010 05:22 AM
Update!	SpawnAeroJohn	Nissan 370Z General Discussions	51	01-17-2010 12:05 PM