Good place to install the exhaust

Bluechic · 04-27-2015, 07:16 PM

Hello there,

First, I apologize to youguys if this thread is not for my question. (I was try to write it in North-West region but it seems dead...)
I have an aftermarket exhaust from Invidia for my '10 Z and I'm looking for the place to install it. I'm living in Redmond, WA and want to know the best place where they can install it for me. Any good shop? Thanks.

(Don't say DIY. I know it's not a rocket science but I don't have a time for it)

vividracing · 04-27-2015, 08:08 PM

You may be able to find someone off craigslist that can do it for you for cheap, if he's a car guy he has stands and the knowledge to do it for you, a 1 hour job or so about $60-$100 no problem, I'd do it for that.

Any exhaust shop could easily charge twice that.

Easy way to save time and money.

madwi · 04-27-2015, 08:36 PM

I was quoted $100 over the phone at a local muffler shop and they charged $80 out the door.

Zbrah · 04-27-2015, 08:57 PM

I would recommend taking it to a muffler shop and let the professional do it, if they f up well at least you can always come back and demand them to fix it.

Japanjay · 04-27-2015, 10:03 PM

If you wanna drive the car down to my place I can put it on for you. I just had a good friend of mine with a 370z come down from Whidbey island and I helped him do his 2 piece front and rear rotors, stainless brake lines, stainless clutch line, flushed those fluids out and replaced with Motul. I have done my exhaust as well as test pipes and another friends test pipes. Did you happen to go to Nissanfest over the weekend?

Japanjay · 04-27-2015, 10:04 PM

Oh, btw the way, NorthWest region on here is dead because pretty much everyone is part of PNW_INC and most all local chat goes through that facebook page.

WaikikiJason · 04-29-2015, 04:01 PM

Connect it to the catalytic converter, that's right where I would install it

Amj2020 · 04-30-2015, 10:08 AM

Exhausts should be easy for any shop worth their salt. If they charge over 100 bucks tax included find someone who is around or less than this.

dkinghl · 04-30-2015, 11:00 PM

Aftermarket exhaust sometime does not fit really well(mine is ARk Grip 2 burntip). you should/ must have a lift to make your life easier when it came to align fitment(some guy just jack up the car and do it- but it seem too dangerous and uncormfortable for me

)

in case it can not be align 100% perfect and you not happy with it, cutting and welding is a must. Bring it to a muffler shop. 100$ up to 150$ (involving cutting and welding) clean and professional.

04-27-2015, 07:16 PM	#1 (permalink)
Bluechic Base Member Join Date: Nov 2014 Location: USA Posts: 20 Drives: 10 Nissan 370Z Rep Power: 10	Good place to install the exhaust Hello there, First, I apologize to youguys if this thread is not for my question. (I was try to write it in North-West region but it seems dead...) I have an aftermarket exhaust from Invidia for my '10 Z and I'm looking for the place to install it. I'm living in Redmond, WA and want to know the best place where they can install it for me. Any good shop? Thanks. (Don't say DIY. I know it's not a rocket science but I don't have a time for it)

04-27-2015, 08:08 PM	#2 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 37 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 38	You may be able to find someone off craigslist that can do it for you for cheap, if he's a car guy he has stands and the knowledge to do it for you, a 1 hour job or so about $60-$100 no problem, I'd do it for that. Any exhaust shop could easily charge twice that. Easy way to save time and money. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

04-27-2015, 08:57 PM	#4 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	I would recommend taking it to a muffler shop and let the professional do it, if they f up well at least you can always come back and demand them to fix it. __________________

04-27-2015, 10:03 PM	#5 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	If you wanna drive the car down to my place I can put it on for you. I just had a good friend of mine with a 370z come down from Whidbey island and I helped him do his 2 piece front and rear rotors, stainless brake lines, stainless clutch line, flushed those fluids out and replaced with Motul. I have done my exhaust as well as test pipes and another friends test pipes. Did you happen to go to Nissanfest over the weekend? Merv likes this.

04-29-2015, 04:01 PM	#7 (permalink)
WaikikiJason Base Member Join Date: Nov 2013 Location: Honolulu Posts: 45 Drives: 09 370Z Touring 6M Rep Power: 11	Connect it to the catalytic converter, that's right where I would install it Merv likes this. Last edited by WaikikiJason; 04-29-2015 at 04:05 PM.

04-27-2015, 08:36 PM	#3 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,400 Drives: Granma red Z Rep Power: 2684428	I was quoted $100 over the phone at a local muffler shop and they charged $80 out the door.

04-27-2015, 10:04 PM	#6 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	Oh, btw the way, NorthWest region on here is dead because pretty much everyone is part of PNW_INC and most all local chat goes through that facebook page.

04-30-2015, 10:08 AM	#8 (permalink)
Amj2020 Enthusiast Member Join Date: Mar 2012 Location: NY/LI Posts: 393 Drives: MB Z,Jeep,BMW Rep Power: 13	Exhausts should be easy for any shop worth their salt. If they charge over 100 bucks tax included find someone who is around or less than this. __________________ 2012 Magnetic Black 370z \| Fast Intentions CBE \| Stillen G3 \| Motordyne ART \| H&R Coilovers \| Work Emotion \| Fujimura \| Uprev \| Amuse\| GT-R Start

04-30-2015, 11:00 PM	#9 (permalink)
dkinghl Base Member Join Date: Feb 2014 Location: texas Posts: 169 Drives: 390z Rep Power: 11	Aftermarket exhaust sometime does not fit really well(mine is ARk Grip 2 burntip). you should/ must have a lift to make your life easier when it came to align fitment(some guy just jack up the car and do it- but it seem too dangerous and uncormfortable for me ) in case it can not be align 100% perfect and you not happy with it, cutting and welding is a must. Bring it to a muffler shop. 100$ up to 150$ (involving cutting and welding) clean and professional. Last edited by dkinghl; 04-30-2015 at 11:03 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Good place to go for custom exhaust piping near Norwalk or Cerritos.	VQ37	Southern California Region	5	03-02-2014 07:53 PM
A good place to install an Exhaust in Northern NJ	Gman91111	North East Region	7	11-20-2012 09:41 AM
Good place to install intakes,hfc in Maryland	jakexlee	Mid-Atlantic Region	16	10-14-2012 05:47 AM
Good Place in Houston to install coilovers	kkruel55	Texas	12	01-15-2011 12:31 PM
Good place to install clear bra/tint around sacramento area	polarpanda	Exterior & Interior	0	10-13-2009 07:22 PM