which brand of oil cooler?

seungklee · 08-23-2011, 08:27 PM

Quote:

Originally Posted by OZshifter88

Soo i had the cooler for about a week and a half everything was good oil temps around 180. Was driving home tonight and I heard a weird noise, then my oil light came on and the car almost lost control. I quickly came to a stop and huge fumes of smoke started pouring out from the engine bay. I turned the car off and noticed oil everywhere on the road behind me, all over my wheels and all over the engine.. meanwhile oil was still pouring out all over the ground while the car was stopped. Going to have the car towed to the shop I had install it in the morning and figure out what the problem is.

Anyone have an idea what happend? Has anyone else had a problem like this with the Z1 Motorsports Oil cooler or any other oil coolers? Any help here would be great! thanks

I don't know about the smoke, but when I didn't tighten the fittings enough, the oil just started pouring out of the fittings and gushed everywhere all the way behind my radiator. It could be the fact that yours wasn't tight enough maybe? I still don't know what seems to be the issue with smoke and oil light coming on. Oh I did the install with help of a friend.

chii370 · 08-23-2011, 08:47 PM

The smoke was probably from the oil spraying all over a scalding hot motor, and the light would come on if it sensed a HUGE decrease in both oil pressure and amount of oil. Sounds like u ruptured a line/fitting or "hope not" the core.

It wont hurt anything at all as long as the car was NOT run w/o oil and u shut it down right away, it will just be a bitch to clean up lol.

OZshifter88 · 08-24-2011, 10:50 PM

Sorry that I havent been able to update this in a while. Just wanted to let everyone know of how the situation was handled. It turns out that a small pin that held the fitting in place was either missing or came out and because of that it resulted in one of the lines to come off. From what I understand the smoke I was seeing was due to oil getting on the manifold.

Big thanks to Z1 for sending me out a new fitting very quickly, I was able to have the car returned to me right before the Flat Out Motorsports event at Roebling Road last weekend! It was very hot out there, I would say the air temps were around 98, oil temps never got above 230!!

Dustin@Z1 · 08-25-2011, 06:13 AM

Quote:

Originally Posted by OZshifter88

Sorry that I havent been able to update this in a while. Just wanted to let everyone know of how the situation was handled. It turns out that a small pin that held the fitting in place was either missing or came out and because of that it resulted in one of the lines to come off. From what I understand the smoke I was seeing was due to oil getting on the manifold.

Big thanks to Z1 for sending me out a new fitting very quickly, I was able to have the car returned to me right before the Flat Out Motorsports event at Roebling Road last weekend! It was very hot out there, I would say the air temps were around 98, oil temps never got above 230!!

Excellent! I am glad to hear you were able to make it to the track. I know of a few others who went to that event as well. Did you see a Blue G37 at the event along with MIKE in the THEPOWDERCOATER.com Blacked out 370Z?

As I mentioned before, this type of failure was extremely odd. As with anything else in life...anything is possible. Those pins are pressed in and what allows for the swivel function of the fitting itself. We have inspected and verified all current lines on the shelf for both the 300zx, 350Z and 370Z oil cooler kits.

Any thoughts on coming up for the Nationals and doing that track event?

OZshifter88 · 08-25-2011, 09:26 PM

Quote:

Originally Posted by Dustin@Z1

Excellent! I am glad to hear you were able to make it to the track. I know of a few others who went to that event as well. Did you see a Blue G37 at the event along with MIKE in the THEPOWDERCOATER.com Blacked out 370Z?

As I mentioned before, this type of failure was extremely odd. As with anything else in life...anything is possible. Those pins are pressed in and what allows for the swivel function of the fitting itself. We have inspected and verified all current lines on the shelf for both the 300zx, 350Z and 370Z oil cooler kits.

Any thoughts on coming up for the Nationals and doing that track event?

Yes both the blue G37 and the black 370 were there. Me and the G were in the same run group, pretty even match up.

I also got to take a ride along with the black z, he was in a different run group from me, he is an amazing driver, I think he was pushing low 1:20's in that thing!

As for Nationals I would like to attend but my works schedule for that week looks pretty full, I doubt I will be able make it

supunna_picta · 08-25-2011, 10:55 PM

damn, wish I had seen this thread a few hours ago. I just finished installing mine... would have checked the couplers.

Oh well, a test drive, road trip and track day in the next 2 weeks should prove it out.

Sorry to hear about the issue - even with an occasional glitch this is still a superior product imo and Z1 has excellent customer service!

Nikkolai · 01-11-2012, 08:22 AM

Back from the dead but is this really a Nismo oil cooler kit?

370Z Nismo Oil Cooler Kit

False alarm, the part number is the same as the Nissan Motorsports kit. But now I am not sure where they got that picture from.

08-25-2011, 10:55 PM	#6 (permalink)
supunna_picta Base Member Join Date: Mar 2011 Location: Englewood, CO Posts: 102 Drives: Red 370z Rep Power: 16	damn, wish I had seen this thread a few hours ago. I just finished installing mine... would have checked the couplers. Oh well, a test drive, road trip and track day in the next 2 weeks should prove it out. Sorry to hear about the issue - even with an occasional glitch this is still a superior product imo and Z1 has excellent customer service! __________________ 2011 Touring/Sport/6mt \| winter: 2009 WRX

01-11-2012, 08:22 AM	#7 (permalink)
Nikkolai Base Member Join Date: Jun 2010 Location: DFW Posts: 238 Drives: Boss 302, Frontier Rep Power: 17	Back from the dead but is this really a Nismo oil cooler kit? 370Z Nismo Oil Cooler Kit False alarm, the part number is the same as the Nissan Motorsports kit. But now I am not sure where they got that picture from. Last edited by Nikkolai; 01-11-2012 at 08:30 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
Oil cooler orientation (Z1 cooler)	BrandonT	Engine & Drivetrain	10	05-23-2011 08:26 AM
STILLEN oil cooler kit + STILLEN power steering cooler = fit?	ZBW39	STILLEN	2	07-02-2010 01:08 PM
Oil Cooler.....Trans Cooler...	kannibul	Engine & Drivetrain	6	12-31-2009 06:32 PM

08-23-2011, 08:47 PM	#2 (permalink)
chii370 Track Member Join Date: Jul 2010 Location: . Posts: 642 Drives: . Rep Power: 18	The smoke was probably from the oil spraying all over a scalding hot motor, and the light would come on if it sensed a HUGE decrease in both oil pressure and amount of oil. Sounds like u ruptured a line/fitting or "hope not" the core. It wont hurt anything at all as long as the car was NOT run w/o oil and u shut it down right away, it will just be a bitch to clean up lol.

08-24-2011, 10:50 PM	#3 (permalink)
OZshifter88 Base Member Join Date: Jul 2011 Location: Ocoee Florida Posts: 21 Drives: 2016 White Nismo Rep Power: 16	Sorry that I havent been able to update this in a while. Just wanted to let everyone know of how the situation was handled. It turns out that a small pin that held the fitting in place was either missing or came out and because of that it resulted in one of the lines to come off. From what I understand the smoke I was seeing was due to oil getting on the manifold. Big thanks to Z1 for sending me out a new fitting very quickly, I was able to have the car returned to me right before the Flat Out Motorsports event at Roebling Road last weekend! It was very hot out there, I would say the air temps were around 98, oil temps never got above 230!!