370z nismo bumper clips

konaman47

Can someone who has a nismo 370z post a picture of the inside of their wheel well? Specifically where the 3 clips are for the fender liner at the front of the wheel? I think I have the wrong size clips and want to see what ya'll have for clips there?

Many thanks.

Duc_Z09

You mean this? OEM Fender Liner, Bumper, Body Trim Clip 09321

__________________
2009 370z #206 (all mods are Home Depot)
2009 Ducati 848 (full Ohlins, Termignoni, etc)
2003 Grand Cherokee (long arms, big tires, 4.56, lockers)

konaman47

That COULD be it but the 3 holes on the nismo fender liner just don't seem that small. I have those clips currently in the 3 holes but their loose. one popped out the other day and lost it on the road..

konaman47

The fender liners on the nismo attach to the undertray via means of 3 clips (perhaps screws i'm not sure) just in front of the wheel but the clips don't seem to be quite doing the job which leads me to believe i have the incorrect clip or missing screws there...

Duc_Z09

Weird. They seem fine on mine.

__________________
2009 370z #206 (all mods are Home Depot)
2009 Ducati 848 (full Ohlins, Termignoni, etc)
2003 Grand Cherokee (long arms, big tires, 4.56, lockers)

konaman47

Take a look here:Requesting pics of Nismo front fender lining

It appears this guy has 3 screws there. I'm curious - did he put those there cause he was having issues or are the supposed to be there?

You have a nismo and have clips there, not screws?

OldFart

I didn't add any holes, they are supposed to be there, also I am using a Z speed piece, maybe different than the stock piece in regards to fasteners.

zmanelite

Engine Splash Shield Bumper Hardware Kit Bolts J Nuts Plastic Clips Best Kit | eBay

__________________
Instagram @zmanscm

Duc_Z09

I was thinking you meant the upper holes, which definitely attach via those push retainers I linked to. The bottom part uses some other sort of fastener which appears to be broken on mine. To remove the undertray however, there are just a bunch of bolts (quite a handful actually) and 9 of those same expandable retainers; 3 of them on each side and 3 in the center directly underneath the engine.

__________________
2009 370z #206 (all mods are Home Depot)
2009 Ducati 848 (full Ohlins, Termignoni, etc)
2003 Grand Cherokee (long arms, big tires, 4.56, lockers)

konaman47

Sorry yeah, I meant the lowest 3 fasteners on the fender liner that face the front of the wheel. They're plastic push type fasteners on yours? not screws?

Duc_Z09

I believe so. Mine are definitely messed up; they don't seem very durable anyway... I'm probably just going to fabricate a backing plate out of sheet aluminum for that area and then use whatever fasteners I want.

__________________
2009 370z #206 (all mods are Home Depot)
2009 Ducati 848 (full Ohlins, Termignoni, etc)
2003 Grand Cherokee (long arms, big tires, 4.56, lockers)

konaman47

The 3 holes in front of the wheel are all good. Those are the typical push-pin plastic clip. It's the small triangular shaped plastic piece off to the side in front of the wheel as in the mentioned article above where the guy was "requesting pictures" as well. You'll see where they have what appear to be rivets, I have small little plastic rivets. I think they're supposed to be rivets, however, in the bottom he has what looks like a philips (star headed) screw. Wondering what he has behind that to grab the screw?

OldFart

Yes, it is a phillips head screw and screws into a 'U' clip I believe.