I should be home in time to go to this....I usually leave out of STL around 10am or 11am to get home with plenty of time to relax.:tup:

Exedy699...This is the closest thing to a Cars & Coffee Kansas City has.. All kinds of cars show up and display. Usually lot's of Ferraris, Lambos, Maserati's, to a few hot rods to Honda Civics.
It officially starts at 7 pm but to get to a good parking place to display your car (in close proximity to KC Trends, I recommend being there by 6 pm. Many/most of us just park on the street so we can get in and out easier.

A little auto porn for that azz
 

Here is your invitation to join the Heart of America Z Car Club at the Belton Cruise this Saturday, August 24th for the monthly Belton Car Cruise. This may be a monthly event for Belton but it’s the first for us as a club.
What can you expect? Bring a camera because you’ll be treated to an amazing assortment of cars…anything from classics to hot rods and even exotics! I personally have seen Lamborghinis there!
Besides seeing great cars, downtown Belton businesses are open for dining and refreshments. This is a great family event!
Tony Mithelavage is our “Ringmaster” for this. Tony has done this event several times and based on his experience here is how it will work:
Meeting place: Advance Auto on the north end of Truman Corners Shopping Center. This is at Blue Ridge Boulevard and US 71/I-49.
Begin meeting at 2:45 pm.
Exit Truman Corners at 3:00 SHARP!
The group will caravan to Belton and stage their cars. It is important that if you want to display your car with the group that you arrive with the group. As I mentioned, 100’s of cars attend this and parking can get scarce.
Questions? Contact Tony at t_mthlvg@yahoo.com .
NOTE! If you can’t meet us at 2:45 you can still join us at the Cruise BUT, be advised, there may not be room to park with us.
See you there!!

Well I have only read of such meetings, but i am excited to see what all the fuss is about. Thank you for the explanation and count me in. Will you be joining?


Sounds like it'll be a busy weekend :D Have a few (literally, few) pics of Sunday's meet. In my albums if anyone would like to check them out.

Well if you can spare a few hours without getting in trouble with the Mrs. I'll be there.

the event we attended was the "Annual Kansas City Car Meet and 435 Loop Cruise v. 2013 ". It was also at the Shawnee Mission Park.

so who all wants to meet up @ buffalo wildwings off 105th and metcalf before fast fridays this week? thinkin around 6

Ummm OK :hello:

uhh ya! thinking bout getting go-pro out, as well as try and get some rolling shots with doors off the jeep.

:tup:

So, got my wheel alignment done today and here are the specs. Keep in mind that im lowered on swifts as well. Im not to worried about the fronts being off in camber, but that left rear is pretty far out and wondering if i should consider getting a rear camber kit. What do you guys think? The toe is good which outta the two camber/toe i think toe being outta whack wears your tires more right? Anyways i was going to post this in the thread made for it, but would like the local community opinion as well.

Attached is the before and after. The before is just off since i had the car lowered a month or two ago and never got an alignment since i was waiting on my wheels.

It's not all that bad. Without looking at mine, I think you are quite a bit better. The Z has such a negative camber spec anyway that a half of a degree isn't going to matter much.

I've thrown around the idea of camber kits, but mine have worn pretty well. I've got ~8k miles on them and they are actually wearing pretty even.

Does this mean you have pics with your wheels on??!

I have a few that i took quickly before taking it in for alignment. Need to take some better pics for the review i will be writing later. Here ya go:

http://www.the370z.com/members/pbhak...tar-f14s-2.jpg

The Rear Super Deep Concave wheel is just awesome IMO.
http://www.the370z.com/members/pbhak...ncave-rear.jpg

http://www.the370z.com/members/pbhak...tar-f14s-1.jpg

http://www.the370z.com/members/pbhak...tar-f14s-2.jpg

New wheels? If so :drool:

:leghump:

Yup finally got them in after 2 months of waiting

Sent from my PG86100 using Tapatalk 2

:eek2: Those look amazing. U have to make it to ff so i can check this thing out

Anybody see themselves here from Sunday?
Sorry. I couldn't get link to post.
Never mind.
Return to your normal activities.
Move along. There's nothing to see here.


As an explanation. I found a video on Facebook about last Sunday's event but I couldn't get the link to work.

Your car looks great! Can't wait to see it in person!!

Thanks guys! I have a few more pics ill be putting in an album that my wife took for my review. Ill post them up today.

BTW, no fast Friday's for me. I've been ordered to appear for boyfriend duty.

BTW#2 , did you see there's another car event at Shawnee Mission Park Saturday at 3 pm. Put on by Modified Militia out of St. Joe but some Kansas City people in the group.

I should be down for FF this week.

Ill be at fast fridays too. Finally in town for one.

So we all meeting at BWW at 6pm right?

:tup:

Yes Sir

Ethan will be there around 6:20. Who wants to take that bet?

I just swung by my dads house, we headed that way in a little.

AHH I forgot to check this thread out... I don't live to far from KC Trends. If I would've known you guys are meeting at BWW I would have gone too... Well hopefully I'll be in town for the next FF

Man...i shoulda taken this bet, he was there before me!

Here is my review of GetYourWheels over in the wheels thread. Wifey took some nice shots of the car so thought I would share with the group.

http://www.the370z.com/wheels-tires/...pic-heavy.html

Nice review. Will definitely use them for the all seasons. BTW, what camera was used to take the pics? Don't tell me a phone camera bc I will just have to sit down in awe.

In random news, nobody warned me about the huge money black hole around here called Nebraska Furniture. Went just to look and left $600 poorer.

NBF got me for $9k..that one still hurts:shakes head:

Yes NFM has everything you need and everything you didn't know you needed.

Come on IKEA...just a bit longer

Canon T2i DSLR

If these start around $50k. I will definitely get one. http://www.the370z.com/members/tower...ra-concept.jpg

Supra Concept:tup:

If its forced induction, more than 4-cyl, branded as Supra and less than $50k, I'm in.