Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Mid-Atlantic Region (http://www.the370z.com/mid-atlantic-region/)
-   -   VA Beach/Hampton Roads (http://www.the370z.com/mid-atlantic-region/52248-va-beach-hampton-roads.html)

Onelownismo 03-26-2015 07:53 AM

Quote:

Originally Posted by Tigger (Post 3149636)
So this is why you aren't coming out. Too worried about trucks. Yer gonna be one them aren't ya? Next one is gonna be a monster turbo diesel and sooner or later you'll forget a stock Z can still smoke ya. :stirthepot:

Hahaha, already got the turbo. Wanna run the Porsche? lol j/k

Voice59 03-26-2015 10:39 AM

Quote:

Originally Posted by Onelownismo (Post 3149631)
Kai I saw you on Tuesday! I was coming off 264e heading north on independence and I think you were merging onto 264w. I was in my new pickup which is why you probably didn't even notice lol.

Lol that's what's up man! Finally got it supercharged too. Lots of fun.

Voice59 03-26-2015 10:40 AM

Quote:

Originally Posted by Tigger (Post 3149617)
Exactly. Sell the Z and buy a Porsche. :)

Lol why?!

Voice59 03-26-2015 10:42 AM

Quote:

Originally Posted by bkngo (Post 3148018)
Voice59, did you find a place for your state inspection yet?

Yes I did!

Onelownismo 03-26-2015 11:46 AM

Quote:

Originally Posted by Voice59 (Post 3149889)
Lol that's what's up man! Finally got it supercharged too. Lots of fun.

I'm going to need a ride in that beast next time I see you :tup:

Voice59 03-26-2015 12:57 PM

Show up to a meet... And it's no problem.

bkngo 03-26-2015 04:23 PM

I was chatting with Kasey... about computer parts vs car parts lol... but yeah, I love that Stillen kit.

Voice59 03-27-2015 11:08 AM

Yall decide on what you're gonna do? Mod wise?

240se 03-27-2015 12:13 PM

I need a part off of a Nismo. The front muffler hanger extension part number 20794 in this picture. I put a Nismo muffler on my non Nismo Z with a AAM midpipe but I'm only running the rear hangers because the front hanger on the Nismo muffler requires the extension to work. If you have one that you are willing to part with let me know or if you have a Nismo and you can measure the hole spacing on this part for me then I can make one.
Thanks

http://i30.photobucket.com/albums/c3...psxcrr2gsv.jpg

Tigger 03-27-2015 02:16 PM

Quote:

Originally Posted by Voice59 (Post 3149893)
Lol why?!


WHY?!?! Was that a real question? Lol. :stirthepot:

Onelownismo 03-28-2015 11:16 AM

I finally got my car tuned yesterday. She's putting down 310hp/260tq. I thought it would be a little higher but I think the midrange is really where most of my gains were. It feels great and really responsive now. I think if I want to see bigger gains I need headers. I doubt I'll ever go FI. I'm very happy for now though.

Tigger 03-28-2015 01:16 PM

Quote:

Originally Posted by Onelownismo (Post 3152390)
I finally got my car tuned yesterday. She's putting down 310hp/260tq. I thought it would be a little higher but I think the midrange is really where most of my gains were. It feels great and really responsive now. I think if I want to see bigger gains I need headers. I doubt I'll ever go FI. I'm very happy for now though.


So you officially have no reason to bow out of a meet since your car must not be in pieces anymore. :p

Running4Mayor 03-28-2015 01:30 PM

Quote:

Originally Posted by Tigger (Post 3152477)
So you officially have no reason to bow out of a meet since your car must not be in pieces anymore. :p

:iagree:

Onelownismo 03-28-2015 01:42 PM

Quote:

Originally Posted by Tigger (Post 3152477)
So you officially have no reason to bow out of a meet since your car must not be in pieces anymore. :p

That depends, when's the next meet???? :rolleyes:

Voice59 03-28-2015 01:57 PM

Lol

Voice59 03-28-2015 03:15 PM

Quote:

Originally Posted by Tigger (Post 3152477)
So you officially have no reason to bow out of a meet since your car must not be in pieces anymore. :p

Where did you get it tuned?

Onelownismo 03-28-2015 04:03 PM

Quote:

Originally Posted by Voice59 (Post 3152527)
Where did you get it tuned?

Chris Hoover at Moore Automotive did it. Nice guy, did a great job. Even hooked me up with a little discount.

bkngo 03-28-2015 06:13 PM

Onelownismo,

how long did it take him to tune your car... how much would I expect to pay... did you buy any equipment?

Onelownismo 03-29-2015 10:45 AM

Quote:

Originally Posted by bkngo (Post 3152609)
Onelownismo,

how long did it take him to tune your car... how much would I expect to pay... did you buy any equipment?

He quoted me $700 but gave me a $50 break. It took him about 2.5 hrs. No I didn't buy anything other than an Uprev License which is half of the tuning cost. He said if I take it back to get retuned for any reason it will really only be about $150-250.

Voice59 03-29-2015 10:52 AM

we should get together for something today...nothing major. just maybe a time slot in each of our schedules on our way to do something else.

bkngo 03-29-2015 12:43 PM

Onelownismo, thanks for the info... Kai, I'm finishing my capstone project today... maybe next week... I have a training session at 0800 next Saturday, but I'm free after 9ish and i'll be out near VA beach area... maybe we could meet up at Starbucks or something...

Tigger 03-29-2015 01:12 PM

Yeah I just landed in El Paso. I'll be gone for the week. Getting back Friday afternoon. Should be able to do something next weekend.

Running4Mayor 03-29-2015 01:44 PM

Damn Im just seeing this... I should be free Saturday too

Onelownismo 03-29-2015 01:45 PM

Kai I'm at work until 19:30, maybe after that if I don't head to my GF's place.

I can definitely do something next weekend though (except Saturday during the day).

Onelownismo 03-29-2015 01:46 PM

Quote:

Originally Posted by bkngo (Post 3153151)
Onelownismo, thanks for the info... Kai, I'm finishing my capstone project today... maybe next week... I have a training session at 0800 next Saturday, but I'm free after 9ish and i'll be out near VA beach area... maybe we could meet up at Starbucks or something...

No problem. Maybe if you tell him I sent ya he'd offer a similar discount.

Voice59 03-29-2015 04:49 PM

Lol maybe next time

Running4Mayor 03-30-2015 11:53 AM

Anyone wanna help a brother install my G3's this weekend?

Tigger 03-30-2015 12:09 PM

Quote:

Originally Posted by Running4Mayor (Post 3154129)
Anyone wanna help a brother install my G3's this weekend?


Sure buddy. Bring it over to my place. Got a garage and tools.

Tigger 03-30-2015 12:10 PM

I'll have Shannon come over so she can bring us beer while we work. Lol. I need tell her I said that.

Running4Mayor 03-30-2015 01:00 PM

That definitely work for me :tup:. Then maybe afterwards we all can meet up hit up Blue Pete's or whatever.

Tigger 03-30-2015 03:23 PM

Quote:

Originally Posted by Running4Mayor (Post 3154184)
That definitely work for me :tup:. Then maybe afterwards we all can meet up hit up Blue Pete's or whatever.


Sounds like a good plan to me.

Onelownismo 03-30-2015 03:36 PM

What day are ya'll doing that? I may stop by.....

Voice59 03-30-2015 04:24 PM

I work this weekend possibly. I'd like to meet up if it's after 3pm.

Tigger 03-30-2015 06:32 PM

VA Beach/Hampton Roads
 
Quote:

Originally Posted by Running4Mayor (Post 3154184)
That definitely work for me :tup:. Then maybe afterwards we all can meet up hit up Blue Pete's or whatever.


How about Saturday around noon? Then we can get it on the road and make sure it doesn't throw any codes right away. Then we can go play. Sound good?

I have an OBD scanner too, just in case.

Running4Mayor 03-30-2015 07:36 PM

I'm down!

bkngo 03-30-2015 08:32 PM

Sweet! Let me know.

Tigger 03-30-2015 08:38 PM

Cool. So yeah. Looks like Saturday afternoon will be good for everyone and Timmy and I should be wrapped up by then. Let's call it 3pm for now. Details to follow.

Voice59 03-31-2015 07:52 AM

I'll let you guys know

bkngo 03-31-2015 07:00 PM

fast 7? Lynnhaven AMC???

Running4Mayor 03-31-2015 07:28 PM

Quote:

Originally Posted by bkngo (Post 3155749)
fast 7? Lynnhaven AMC???

Hmmmmm you're on to something lol


All times are GMT -5. The time now is 07:16 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2