Powdercoating in Mid-A

Red__Zed · 02-17-2011, 05:23 PM

Hey guys, was just wondering if any of you had recommendations for someplace I could get a set of rims powdercoated inexpensively. I'm not terribly concerned with great quality (they're winter rims for the subaru), just something decent for cheap.

Thanks.

2theextreme · 02-17-2011, 07:33 PM

I think several folks have used D&V Auto Body for their rims. I used them for my calipers and they did a good job. Others may have suggestions but that's mine.

shadoquad · 02-17-2011, 07:45 PM

A drunk m4a1mustang w/ a spray can.

Red__Zed · 02-17-2011, 08:37 PM

Quote:

Originally Posted by shadoquad

A drunk m4a1mustang w/ a spray can.

that's the backup plan.

2theextreme · 02-17-2011, 09:24 PM

Quote:

Originally Posted by shadoquad

A drunk m4a1mustang w/ a spray can.

F that.....choose me with the Humiliator on having a seizure!!

Yeah, I went there.....beat that, y0!

m4a1mustang · 02-17-2011, 09:36 PM

I'm actually really good with a spray can, drunk or sober.

D&V is expensive. If you bring just the rims themselves, ASCO American Stripping Company in Manassas is pretty reasonable.

2theextreme · 02-17-2011, 09:40 PM

Quote:

Originally Posted by m4a1mustang

I'm actually really good with a spray can, drunk or sober.

D&V is expensive. If you bring just the rims themselves, ASCO American Stripping Company in Manassas is pretty reasonable.

We never sleep, do we?

daisuke149 · 02-17-2011, 09:56 PM

Quote:

Originally Posted by 2theextreme

We never sleep, do we?

You mean with him? Keep that to yoself yo

m4a1mustang · 02-17-2011, 10:11 PM

Quote:

Originally Posted by daisuke149

You mean with him? Keep that to yoself yo

I already slept with him at ZDayZ.

You might be next. I'm quiet, like the wind...

Red__Zed · 02-17-2011, 10:43 PM

Quote:

Originally Posted by m4a1mustang

I already slept with him at ZDayZ.

You might be next. I'm quiet, like the wind...

Humph. I always remembered you as kind of a screamer.

m4a1mustang · 02-17-2011, 10:46 PM

Quote:

Originally Posted by Red__Zed

Humph. I always remembered you as kind of a screamer.

2theextreme · 02-18-2011, 04:17 AM

Too much fun!

GM_Traitor3.5 · 02-18-2011, 07:40 AM

Quote:

Originally Posted by Red__Zed

Humph. I always remembered you as kind of a screamer.

I actually had some paintball gun parts powdercoated at Extreme Powdercoating in Lorton, VA. I think the average is about $200 a wheel if I'm not mistaken.

Then again, I've been wrong before

m4a1mustang · 02-18-2011, 07:46 AM

ASCO quoted me $125/per for a 19" forged wheel. It will be a good bit cheaper if the wheels are smaller. D&V quoted Jon $200/per but they quoted me over $250/per.

GM_Traitor3.5 · 02-18-2011, 07:49 AM

Quote:

Originally Posted by m4a1mustang

ASCO quoted me $125/per for a 19" forged wheel. It will be a good bit cheaper if the wheels are smaller. D&V quoted Jon $200/per but they quoted me over $250/per.

That's because you're a baller dude!

02-17-2011, 05:23 PM	#1 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 121	Powdercoating in Mid-A Hey guys, was just wondering if any of you had recommendations for someplace I could get a set of rims powdercoated inexpensively. I'm not terribly concerned with great quality (they're winter rims for the subaru), just something decent for cheap. Thanks.

02-17-2011, 07:33 PM	#2 (permalink)
2theextreme RIP Tony :( (1969-2015) Join Date: Feb 2009 Location: Northern Virginia Posts: 18,802 Drives: '14 Mustang GT/CS Rep Power: 69	I think several folks have used D&V Auto Body for their rims. I used them for my calipers and they did a good job. Others may have suggestions but that's mine. __________________ SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips

02-17-2011, 09:36 PM	#6 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6964	I'm actually really good with a spray can, drunk or sober. D&V is expensive. If you bring just the rims themselves, ASCO American Stripping Company in Manassas is pretty reasonable. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

02-18-2011, 04:17 AM	#12 (permalink)
2theextreme RIP Tony :( (1969-2015) Join Date: Feb 2009 Location: Northern Virginia Posts: 18,802 Drives: '14 Mustang GT/CS Rep Power: 69	Too much fun! __________________ SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips

02-18-2011, 07:46 AM	#14 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6964	ASCO quoted me $125/per for a 19" forged wheel. It will be a good bit cheaper if the wheels are smaller. D&V quoted Jon $200/per but they quoted me over $250/per. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

02-17-2011, 07:45 PM	#3 (permalink)
shadoquad A True Z Fanatic Join Date: Apr 2010 Location: . Posts: 42,608 Drives: . Rep Power: 3888	A drunk m4a1mustang w/ a spray can.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Powdercoating Wheels	PG370	Wheels & Tires	16	11-13-2010 09:49 PM
powdercoating wheels.	COD4	Wheels & Tires	6	02-22-2010 05:13 PM
powdercoating Reccommendations!?	209Z	Northern California Region	9	01-28-2010 04:37 PM
powdercoating	discorpio	Wheels & Tires	26	12-30-2009 06:50 AM