Garage in Hampton Roads for Rear Diff Bushing Replacement?

El Zombo · 05-11-2018, 07:18 AM

Hi, er'body.

Is there a shop in the Hampton Roads area that can change the rear differential bushing without removing the subframe?

Priotiry Nissan quoted $3,000 and I had to show them the bushing and explain the silicone leak. I'm not so confident in the dealership. I don't have time or room to do it myself and no one seems to know how to do this.

Thanks!
Hector

Krylon · 05-11-2018, 09:13 AM

Ezpze had a good interaction with Ross at Trust Automotive in Chesapeake. I'd say give him a call. I called him about it as well but ended up doing it myself.

If you had the time available there's always the DIY garages around here

takjak2 · 06-11-2018, 03:52 PM

Drive up to Northern Virginia and I'll do it for $300 cash.

Darketch · 01-18-2019, 09:50 PM

OP, did you get ur bushing replaced?

240se · 01-26-2019, 09:55 AM

I would call around until you found a shop that has done this before. Try Custom Car Care in Yorktown, Performance Inovations in Hampton or Japaneese Auto Masters in VB.

I did mine in December and I have the Z1 bushing tool. It got the bushing core out in a few minutes but I gave up trying to get the bushing shell out with it when after cranking on it for 30+min my Craftsman breaker bar exploded. I ended up cutting the shell out in 15min with a small sawzall which is what I would recommend if you do it yourself.

05-11-2018, 07:18 AM	#1 (permalink)
El Zombo Base Member Join Date: Nov 2017 Location: VA Posts: 21 Drives: 2014 370 White MT Rep Power: 7	Garage in Hampton Roads for Rear Diff Bushing Replacement? Hi, er'body. Is there a shop in the Hampton Roads area that can change the rear differential bushing without removing the subframe? Priotiry Nissan quoted $3,000 and I had to show them the bushing and explain the silicone leak. I'm not so confident in the dealership. I don't have time or room to do it myself and no one seems to know how to do this. Thanks! Hector

06-11-2018, 03:52 PM	#3 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	Drive up to Northern Virginia and I'll do it for $300 cash. Krylon likes this. __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

01-18-2019, 09:50 PM	#4 (permalink)
Darketch Enthusiast Member Join Date: May 2013 Location: Virginia Posts: 429 Drives: 14 NISMO #292 Rep Power: 11	OP, did you get ur bushing replaced? __________________ STILLEN G3 \|\| F. I. CF Non-Resonated CBE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VA Beach/Hampton Roads	Onelownismo	Mid-Atlantic Region	4840	09-29-2022 06:41 PM
Whiteline rear Diff bushing kit in stock at B2autodesigns	b2autodesigns	Drivetrain/Engine	298	07-04-2019 07:09 AM
[FOR SALE] Z1 UCA's, Whiteline Rear Diff Bushing Set	Boost_lee	Parts for sale (Private Classifieds)	4	11-22-2017 05:08 PM
Rear Diff bushing, which on top?	YzGyz	Engine & Drivetrain	6	01-29-2015 08:50 PM
Z/G Cruise May 16 in Hampton Roads	PapoZalsa	Mid-Atlantic Region	3	05-16-2010 10:02 PM

05-11-2018, 09:13 AM	#2 (permalink)
Krylon Base Member Join Date: Nov 2015 Location: Virginia Posts: 153 Drives: 370Z Rep Power: 19	Ezpze had a good interaction with Ross at Trust Automotive in Chesapeake. I'd say give him a call. I called him about it as well but ended up doing it myself. If you had the time available there's always the DIY garages around here

01-26-2019, 09:55 AM	#5 (permalink)
240se Enthusiast Member Join Date: Nov 2013 Location: VA Posts: 259 Drives: Gunmetal 12' Rep Power: 11	I would call around until you found a shop that has done this before. Try Custom Car Care in Yorktown, Performance Inovations in Hampton or Japaneese Auto Masters in VB. I did mine in December and I have the Z1 bushing tool. It got the bushing core out in a few minutes but I gave up trying to get the bushing shell out with it when after cranking on it for 30+min my Craftsman breaker bar exploded. I ended up cutting the shell out in 15min with a small sawzall which is what I would recommend if you do it yourself.