YzGyz

The kit install itself is not bad at all. I would estimate it would take good weekend (25 hrs) If you have all your tools lined up. I approve of the kit's design. The instructions for the most part is clear. There were some areas that I couldn't follow but you could post and ask for help. Quite a few people have taken on the task so there are people who can help. SASHA is pretty good with respond to e mails And pm's. I would rate the turbo install itself a 6/10.

List of things to have ready:
-clutch and flywheel to handle power goal
-tools, sockets, lots of extensions, wobble bits, large adjustable Cresent wrench
-safe flat surface and Jack stands
-some lube ( I used water based like KY) to lube up the couplers so they slide together easier
-good light to see around in
-make sure you can get the cat off
-soldering iron and shrink wrap

Hey YzGyz! I was just looking at your build thread and I was wondering how the installation of your BP turbo was and any initial thoughts or comments on the setup in general?

https://scontent.fsnc1-1.fna.fbcdn.net/hphotos-xpa1/v/t1.0-9/12508705_1700741570137510_2400957546694609477_n.jpg?oh=d5970b87fa4a1fbb2ed626e645bd849b&oe=57493B3E

Hahaha funny you should say that birdman71 I am trying to turn it into a legitimate business as I go along. I introduce you all to Valkyrie Systems! Look me up on Facebook and Instagram! Give it a...

And we can't leave you hanging without showing you what it looked like in the dash. http://www.the370z.com/members/asorg31-albums-tesla-screen-builld-picture90546-first-fitment.jpg And finally...

You just wire in a Mac solenoid in place of the CPC solenoid and it can be used for boost control. Last time I checked the circuit was very slow though (10hz). It works, but far from optimal. ...

When I was a child, my Dad was a little overprotective with me. Maybe not overprotective, but definitely overly cautious. Let me give you an example. On the 4th of July, when all the other kids my...

I would of expected more torque for that HP level. Not a bad thing and probably much more manageable on the street.

Test pipes (we added) and Invidia exhaust (one of a few mods that came on the car). Not sure what the boost is. Embarrassingly, we never had time to install the boost gauge! This build came down to...

Update time! First off, congrats to Jayhovah on the finishing of his kit today! Hats off to him and his brother in law being the first to tackle this kit as a DIY! I chatted with them briefly on...

Johnny is the Man to go to for VQ tuning in Houston!!

We're on the way to JTRAN now. The car starts but dies pretty quickly so it's on a flat bed.. Hopefully up and running shortly! Sent from my Nexus 6 using Tapatalk

Got crows feet. Going to finish the pump and JTRAN is going to try and come this afternoon for the base tune! Sent from my Nexus 6 using Tapatalk

Happy New Year! Could have finished today, but we didn't.. Haven't been able to get hold of JTRAN to find out when we can base tune, so we didn't feel rushed. I figure they are probably trying to...

Day 4 - 12/30 Holy crap the clearances to some of those exhaust manifold bolts are tight! I had to get a little creative to get one nut on the driver side (proud but not proud of it at the same...

Another great day.. thinking we could finish today was stupid ambitious, as we came no where near, but still very productive... a lot of time was spent making small adjustments here and there. For...

Ok, sorry I haven't been posting yet, had some great progress but long last two days. Day 1 - 12/23 After getting my base tune for uprev late the night before, I was able to get started. I had a...