valpozguy

Hey man, I saw your threads:

1ST 7AT TOP MOUNT TURBO BUILD.. By S&R Performance

I need Low miles Vq37vhr ASAP.

Did the S&R Turbo blow your motor? I'm having that same turbo placed on my 370. Granted it's automatic, but if that turbo blew your motor I'm going to pull my deposit. Please let me know.

Thanks!

I am very aware of the air temp sensor in the MAF! You are correct, it is required for the MAF to properly function. What I am talking about is how the MAF sensor in a pull-through configuration...

Exactly. Tuning with a blow-through MAF configuration is sort of a middle-ground between MAP tuning and MAF tuning. With a pull-through MAF configuration, we would get the results we want to expect...

there ya go. good point back to my original thought, i wasnt even considering the side effects at this depth yet.

Airflow and pressure are not directly relative anywhere you take reading or measure. Different turbo systems on the same engine will achieve different airflow mass at the same pressures. Which is why...

Boost by gear(check) AND RLTCS is also the next move on my list. What am I going to use it for? Drag racing. I've always wanted a blistering fast car. When the motor popped I decided there was no...

19" Concept One CSL 5.5 http://imageshack.us/a/img577/4952/370e.jpg

Made it to Z-Fest and back. We met up with a group of Zs, Gs, and a handful of other cool cars first, then we drove together to the Ontario Heritage Airplane Museum, home of OCZ Z-Fest 2014. ...

depending on your tire setup and drop height you should be able to get them very flush with your fenders w/o any spacers

Stock Rays are 19x9 +47 19x10 +30 with your 20mm spacers you will be: 19x9 +27 19x10 +10

Well it actually depends on the new wheels. I got some Varrstoen ES2.2.2s that were 19x9.5 +22 and I needed a spacer so that the wheel cleared the Akebono calipers.

This is very true. Rep to you sir. OP, wheel design matters. Like Work Meisters don't fit without huge offsets

No

it's a safety hazard. i vote for a nationwide ban of stanced cars. not even a joke.

You guys keep track of HP/TQ numbers for your options? Also, does the rev limit increase or stay the same? Pardon for dummy questions btw, but if I don't ask, I won't know :)

Hope this helps. http://www.the370z.com/body-interior-exterior/52263-tunerz-store-akebono-brake-caliper-decals.html