turtle64b

Sorry to hear about your car, I was interested in the hood. Whenever you get a chance please message me back about a price if it is available.

Just curious bro, how much power and tq are ya making?

Yeah man no doubt, I work weekends only so I'm available all week just let me know when u need some help or just moral support lol I know how it can be! I'm in goose Creek

yo we need to link up man let me see that build. i need other higher hp VQs to ride with, just finishing up my boosted performance build g37 follow me on the gram @mercerrr_

Mine was a regulator issue, you could try another regulator. Could be blocked filter?

I already have the spacer from 928, thanks for the info on it needing to be 3/8" and the bolt length, good info. I was going to use washers on the idler pulley.

Well you have me convinced that I need that now too. Better to have the car tuned with it on and hopefully not slipping at 6900RPM than decide later on I need it. Your numbers/figures still blow my...

I can answer a couple of your questions. I've got bad belt slippage on the jackshaft pulley, sc side and I do have a sur grip pulley to put on it when my sc comes back from 928. My sc pulley is a...

Had a similar situation happen to a friend a long time ago. His car was a Civic, but this was his process for a totaled car with aftermarket parts, including motor work: - Car is in potential...

Z1 shows 7whp/7wtq on the EPS 70mm set, but that's NA

Going to have a pressurized ready tonight if you’re still interested in one.

Exactly what he told me back when I needed info on my cjm setup, like I said mine will hold for a while but yours may not and if he says that's normal then that is ok. Also, Seb had me set fuel...

Isn't plugging both holes risking seal blowout even with the upgraded seals? I'd love to do that but am too worried that the little breather really needs to breathe. I would have thought it's...

Hey guys! Thank you for all of your support, it helps so much! So the issue with the supercharger v3 SCi, 928 fully upgraded internals blower head unit was that it was spouting oil from just the...

If you are going with the A2A upgrade from a stock Stillen kit and go the 9psi route you will need my kit to prevent belt slippage. You will be driving the supercharger with about 60 hp and the belt...

Here's a link to the Nissan parts page that shows the 3 different versions that will fit your car (assuming your profile is accurate in listing 2012). ...

Things like this happen in the boosted world all the time. Dont let it defeat you, just mark it up as lesson learned. Its simple, take the SC off (30 minutes) and send it to a certified Vortech shop...

If you’re looking to go the supercharged route, search the forums or google “TopGunz A2A Superchager kit”. TopGunz is a forum member that has researched, tested and created his own, enhanced...

I know I'm over spinning the Vortech bearings, I'll see how long they last. I might buy a spare V3 Si and send it to 928 for the bearing upgrade just in case. I haven't gotten the bolt yet, my...