Nissan 370Z Forum

370Z Forums HOME

My Picture Album

Nissan 370Z Pictures

Premium Membership

Become a Forum Sponsor

		Nissan 370Z Forum > Members List
trogersz34's Profile

trogersz34 is on a distinguished road

trogersz34

Base Member

Last Activity: 01-13-2019 02:07 PM

About Me

About trogersz34

Location

NC

Drives

2013 370z 6MT

Statistics

Total Posts

General Information

Last Activity: 01-13-2019 02:07 PM
Join Date: 07-21-2016
Referrals: 0

Likes Given

19 Likes

trogersz34 liked post by zashburn On thread : Another BP turbo build

Time frame got set back a bit, sorry about that. We didn't know if the CMAK would work properly with the OS Giken clutch so I swapped to the Os Giken delete. That being said both delete kits are...
Liked On: 09-26-2017, 10:30 AM
Posted On: 09-14-2017, 02:33 PM
trogersz34 liked post by photoguy1 On thread : Another BP turbo build

He's not the only one "attempting" the delete with a BP kit. I'm the other Zach with almost identical build sheet. Frank assured me that it wouldn't be to difficult to fabricate the pipe to go around...
Liked On: 08-01-2017, 09:39 AM
Posted On: 07-27-2017, 06:25 PM
trogersz34 liked post by zashburn On thread : Another BP turbo build

Thanks Sasha, that would be super helpful. Sending a few your way now & I'll get some more detailed ones next time I'm up on the lift
Liked On: 08-01-2017, 09:39 AM
Posted On: 07-29-2017, 04:10 PM
trogersz34 liked post by Chuck33079 On thread : Another BP turbo build

Also, get some Thermotec sleeve for the wastegate lines. If you melt those, your car will be insanely fast for a few seconds, and then make a very expensive noise.
Liked On: 07-27-2017, 01:55 PM
Posted On: 04-28-2017, 11:09 AM
trogersz34 liked post by derraj06 On thread : Z1 Brake Master Cylinder Brace - Install Help

I talked to Z1 about this. Basic message was "Yeah that happens. Seems to be variation in the bodies from year to year." I have mine in with only two bolts but I plan to remove it and slot the...
Liked On: 07-18-2017, 11:33 AM
Posted On: 05-03-2017, 02:45 PM
trogersz34 liked post by Halfkiddio On thread : Stiff Front Sway Bar Thoughts

I daily a Hotchkis front bar 50 miles a day. I love it whether I am driving to work or going out to play. The cheapest place to get one from is Amazon.
Liked On: 07-18-2017, 11:22 AM
Posted On: 05-22-2017, 02:31 PM
trogersz34 liked post by Halfkiddio On thread : Absolute Widest Tire on Stock 19s

I've run 265/35 and 285/35 at one time, but dropped down to a 255/40 and 275/35 setup, as I much prefer the feel and grip from the non-bulged sidewalls.
Liked On: 04-28-2017, 11:49 AM
Posted On: 04-27-2017, 03:54 PM
trogersz34 liked post by EliteXpress On thread : Boosted Performance V 2.0 Installed & Tuned By JMS Racing

I mainly run pump gas on the 8psi setting. 93 octane 8psi she made 480 wheel horsepower, 4th gear Dyno pull.
Liked On: 04-18-2017, 08:10 PM
Posted On: 04-16-2017, 10:36 PM
trogersz34 liked post by Nik@SOHO On thread : 700 rwhp Fast Intentions Nismo Build (93 pump & meth)

Heys Guys, I wanted to share a build that we are doing on our 2014 nismo 370Z which will be completed just in time for Zdayz this year. We purchased the vehicle back in october 2015 completely...
Liked On: 03-23-2017, 01:18 PM
Posted On: 04-23-2016, 09:36 PM
trogersz34 liked post by jcosta79 On thread : Remove oem oil cooler?

There is enough space, BARELY. I just finished doing this install on my 2012 Nismo so I know how tight it is in there. You have to clock the thermostat so that the fittings are facing towards the...
Liked On: 01-23-2017, 07:02 AM
Posted On: 08-15-2016, 05:36 PM
trogersz34 liked post by Dustin@Z1 On thread : z1 oil cooler installation w/ pics

Pharmacist PM sent sir! Based on what I have read here, I will be re-evaluating our oil cooler kit immediately. I take pride into the products we list on our website, especially when it bears the...
Liked On: 01-20-2017, 08:58 AM
Posted On: 08-18-2010, 12:40 PM
trogersz34 liked post by Joe@ZSpeed On thread : Opinions needed:ZSpeed HD CSC or Z1 Motorsports Slave Delete

I have to chime in here and mention that just because you do a conversion kit that changes the slave to external doesn't mean you will never have to pull the trans again, There will always be the...
Liked On: 01-04-2017, 06:49 AM
Posted On: 01-22-2015, 11:05 AM
trogersz34 liked post by jwick On thread : Boosted Performance V 2.0 turbo list

There is, buy a manual...:stirthepot:
Liked On: 12-29-2016, 02:03 PM
Posted On: 08-24-2015, 04:13 PM
trogersz34 liked post by Modshack On thread : DIY: Front Stud replacement/ Spacer install

While a few guys have done this, I haven't seen a DIY so here goes. Adding 15mm spacers with extended studs requires jumping through a few hoops.. First, Buy (2) M12 x 1.25 lug nuts (open style)...
Liked On: 11-14-2016, 01:26 PM
Posted On: 06-30-2009, 01:04 PM
trogersz34 liked post by JARblue On thread : Track Day Best Practices - MUST READ

Take it easy and you might be ok. But if you are at all comfortable driving fast, you will definitely experience some pulled timing due to heat without a proper oil cooler. I've had mine out on the...
Liked On: 11-07-2016, 10:14 AM
Posted On: 11-07-2016, 10:08 AM

Page 1 of 2

1

Mini Statistics

Join Date: 07-21-2016
Total Posts: 13
Likes Received: 0
Likes Given: 19

Show All Statistics

Recent Visitors

The last 2 visitor(s) to this page were:

This page has had 677 visits

All times are GMT -5. The time now is 11:44 PM.