Tractionless

Sold some shocks to Tractionless. Nice, easy guy to deal with. Thanks!

I highly recommend NOT using Getyourwheels.com

I had a problem with my Forgestar F14's clear coat failing within 4 months and 1,500 miles of ownership in a state that doesn't see freeze/thaw nor use road salt.

Get your wheels receives them as blanks from Forgestar and then finishes to your liking. Who ever they are using for coating is subpar!

They tried blaming my installer but when I told them i went to a high end shop that deals with all kinds of wheels in sizes up to 30" and showed pics of the machines they backed off. Then they admitted the coater was having problems with the clear that was used on my wheels.

They told me I had to cover dismount, shipping both ways and re-mounting costs to have them recoated.

Upon receiving them back the water that got below the clear damaged the metal permanently. So although recoated the damage can always be seen underneath. They did not tell me that prior to shipping back.

When approaching them about it they offered me a $50 refund on a $2100 set of wheels.

RUN from Getyourwheels.com!!!!

Thanks for an easy transaction. Super transparent and communicative buyer! Buy/sell with confidence.

excellent seller everything worked out great thanks

10/10 would recommend Tractionless as a seller. I recently bought some used wheels from him and he shipped them out the next day. They arrived exactly as described and they were packaged very well! Thanks again

"Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future."

I second that, a pleasure to do business with!!

Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future.

Get rid of that dog sh!t radiator cap and put the OEM one back on. Wash the engine bay and monitor for leaks after that or put a cooling system pressure tester on it and monitor for leaks that way....

Yes I have a VR30 7AT in my car.

A bit of time passed, so let me just confirm that my dash is still great, matte, non-sticky.

I had a variety of parts to install, including oil pump gears. Made sense to do the gallery gaskets (along with thermostat, water pump, etc) as preventative maintenance while the car was down. Plus...

Torque Solution=75A Durometer Urethane Z1=70A durometer

That is why I run a factory mount.

I have a 25 row cooler that bypasses the stock cooler and uses -6AN lines all the way back to the transmission. So far this summer I have not seen over 175 degrees in any situation while driving the...

Is your car slammed to the ground or something?

I have nothing extra to add other than do the pressure gauge first. It's nice to have that piece of mind knowing what's going on. I have a box full of parts for the front of my motor in my garage but...

Another thing to mention: all (well, over 90%) of these wheels come from China. So, searching for a CF wheel through Alibaba or Aliexpress will save you a decent chunk of change and the shipping is...

Yep - change the oil correctly, keep the oil clean and it will last a long *** time. There are also screens on the deck of the heads and on the timing cover. The cam chain tensioners have...

I had them installed at costco. Dealer could only get 2 TPMS sensors working, but aligned the car and balanced wheels properly. Didn't pay for anything but alignment. Then took car to...

On the VTC covers roughly opposite to the cam angle sensors.

Zero. None. Brand new.

Wow….speechless