THE BULL

Hey, I just saw your post about the yaw sensor kit. What's the price for one of them? I'd be very interested in buying if you're still in production.

I created a thread on MyG37 about this, specifically on the rear timing cover, How to inspect your cam tensioner shoes (VQ35DE shoes are a direct fit at 1/4 of the price) As well as removing the...

Turbo failure is expected especially after boltons and tune as you many of these owners either come from the HR/VHR high revving world. VR turbos just wont keep up. You then have limitations of the...

Hello there, I'm a myg37 member and have been doing wiring for some time. My main hobby is wiring (swaps and wire tucks) so when I bought the G, especially after the bay work I started to entertain...

Here's the wire tuck attempt at the VHR engine stand I have http://www.the370z.com/members/the-bull-albums-vhr-swap-picture106464-img-20211231-210850-003.jpg ...

Here are some pictures after a I wired tucked a harness for a future universal swap. http://www.the370z.com/members/the-bull-albums-vhr-swap-picture106466-img-20211231-210850-019.jpg ...

Hello there, I'm a myg37 member and have been doing wiring for some time. My main hobby is wiring (swaps and wire tucks) so when I bought the G, especially after the bay work I started to entertain...

For OP, being that the ECM is converted and TCM no longer communicates it leads me to believe that the BCM is the culprit for CC not to work on Auto/Manual Swaps. Since the manual Z doesnt have a...

S mode is a challenge, You'd have to wire up the input shaft VSS sensor, Smode switch and possibly the rear diff since the auto will read a lower speed than what the input shaft sensor reads and even...

For OP, being that the ECM is converted and TCM no longer communicates it leads me to believe that the BCM is the culprit for CC not to work on Auto/Manual Swaps. Since the manual Z doesnt have a...

S mode is a challenge, You'd have to wire up the input shaft VSS sensor, Smode switch and possibly the rear diff since the auto will read a lower speed than what the input shaft sensor reads and even...

For OP, being that the ECM is converted and TCM no longer communicates it leads me to believe that the BCM is the culprit for CC not to work on Auto/Manual Swaps. Since the manual Z doesnt have a...

S mode is a challenge, You'd have to wire up the input shaft VSS sensor, Smode switch and possibly the rear diff since the auto will read a lower speed than what the input shaft sensor reads and even...

Being that the CSC was replaced I'd take a look at the input shaft VSS sensor on the trans and the Gear position sensor on the transmission to make sure wiring is intact and sensors are not broken. ...

What you need to do is isolate the short then. Follow the white wire from the alternator connector to the M116 white connector inside of the car by the ECM if this has continuity from the alt...

The beaut of this is that it will force more manufacturers to include this port on their turbines for it to fit this car. Though not necessary it will inform/teach owners about and help the driver...