SouthArk370Z

Thanks for liking Vanilla fudge post. Unfortunately the old ways of bringing new music and bands into view these days does not allow for actual albums to be produced. Lots of one hit wonder songs that will never be memorable and last the test of time. I guess Im old and like my parents, they did not like my 60's through 80's music ? Or am I telling the truth that today's contemporary music just sucks. In any event I did enjoy many of the music picks posted on this page. I like your car. Red is always a winner...

hey any chance you seen or know how to reloacate cruise control on 370z i got uprev tune and i want a nrg steering wheel. is it the same as 350z

Hey man, saw you were from S. Arkansas. I lived my early childhood in Camden. Currently in Fayetteville. Nice to run into fellow Arkansans!

Hey, man, I like that you have the FSM linked in your sig -- admirable

Helpful forum members are good forum members

Hey I noticed you had a post (way back in November of last year) in regards to someone have a rattle in their drivers door. You posted that the dealer adjusted something in the window regulator that fixed it. I have a door rattle too, and am beginning to suspect the window regulator. If you have any other insight into the issue I would appreciate it>

Hey, we should meet. I come to Arkansas two or three times a year to drive the Ozarks. Best roads I've ever been on . My first stop from here is Texarkana , then the next day, I just head out.

Thank you for the music compliment. I do like my music -- my interest got stalled around 1994 though.

There are a few threads about repairing verts on this site. IIRC, there is a shop that will ship the proper parts and provide support.

Yes you can - as long as it's a mechanical switch and compatible with engine oil. Might have to use an adapter to match pipe threads. If you can figure out which sending unit has the setting you...

There's a diagram at http://www.the370z.com/engine-drivetrain/16136-how-completely-disable-vdc-6.html#post2682497 . Put the switch in the wire marked "cut here". Found it by going to DuckDuckGo...

Have you tried the exploded diagrams at Courtesy Parts?

If I'm converting music files to MP3 for use in a car (or other poor listening environment), I go with 192k. If someone's ears are that sensitive, they don't need to be listening to music in a...

First thing I'd do is clean the MAFs. Very easy job; two small, easy-to-get-to screws per MAF. Cheap; a can of MAF cleaner spray. Remove MAF, spray, let dry, re-install.

First thing I'd do is clean the MAFs. Very easy job; two small, easy-to-get-to screws per MAF. Cheap; a can of MAF cleaner spray. Remove MAF, spray, let dry, re-install.

First thing I'd do is clean the MAFs. Very easy job; two small, easy-to-get-to screws per MAF. Cheap; a can of MAF cleaner spray. Remove MAF, spray, let dry, re-install.

First thing I'd do is clean the MAFs. Very easy job; two small, easy-to-get-to screws per MAF. Cheap; a can of MAF cleaner spray. Remove MAF, spray, let dry, re-install.

First thing I'd do is clean the MAFs. Very easy job; two small, easy-to-get-to screws per MAF. Cheap; a can of MAF cleaner spray. Remove MAF, spray, let dry, re-install.

It looks like 118P will allow burnouts with the brakes on. There is at least one DIY on this site where you can verify. The door switch would be one of the last places I would mod to get rid of...

I heard the reason brake grease is used on disc brakes is that drum brakes require it (where shoes rub against backing plate) so most mechanics already had it in their toolbox when discs came along....

Search is your friend. Go to any of the big web search engines and add "site:the370z.com" to your search string. Eg, "2014 oil cooler site:the370z.com".

ROFLMAO I'm not withholding anything - I was never bothered by the way it behaved so I didn't bother to read my OM to find the answer. ;)

ROFLMAO I'm not withholding anything - I was never bothered by the way it behaved so I didn't bother to read my OM to find the answer. ;)