SouthArk370Z

Thanks for liking Vanilla fudge post. Unfortunately the old ways of bringing new music and bands into view these days does not allow for actual albums to be produced. Lots of one hit wonder songs that will never be memorable and last the test of time. I guess Im old and like my parents, they did not like my 60's through 80's music ? Or am I telling the truth that today's contemporary music just sucks. In any event I did enjoy many of the music picks posted on this page. I like your car. Red is always a winner...

hey any chance you seen or know how to reloacate cruise control on 370z i got uprev tune and i want a nrg steering wheel. is it the same as 350z

Hey man, saw you were from S. Arkansas. I lived my early childhood in Camden. Currently in Fayetteville. Nice to run into fellow Arkansans!

Hey, man, I like that you have the FSM linked in your sig -- admirable

Helpful forum members are good forum members

Hey I noticed you had a post (way back in November of last year) in regards to someone have a rattle in their drivers door. You posted that the dealer adjusted something in the window regulator that fixed it. I have a door rattle too, and am beginning to suspect the window regulator. If you have any other insight into the issue I would appreciate it>

Hey, we should meet. I come to Arkansas two or three times a year to drive the Ozarks. Best roads I've ever been on . My first stop from here is Texarkana , then the next day, I just head out.

Thank you for the music compliment. I do like my music -- my interest got stalled around 1994 though.

This one has potential but doesn't look like a Comedy Classic to me - yet. :) Tags are kind of funny.

:iagree: I've fixed many switches (and potentiometers) with a liberal application of contact cleaner. Make sure the switch is dried out before applying power; the contact cleaner gets cold as it...

FWIW, one can bypass the starting system by unplugging the "S" connector from the backside of the starter and applying 12V to the wire going to the starter solenoid when you want the starter to spin....

This may or may not help in your research but bolt torque is an indirect measure of bolt stretch.

:iagree: I've fixed many switches (and potentiometers) with a liberal application of contact cleaner. Make sure the switch is dried out before applying power; the contact cleaner gets cold as it...

If you don't like the idea of using a whet rock, get a large, flat plate (metal works best) and lay some wet/dry sandpaper on it. Place caliper half on sandpaper and go to town. Use plenty of...

If you don't like the idea of using a whet rock, get a large, flat plate (metal works best) and lay some wet/dry sandpaper on it. Place caliper half on sandpaper and go to town. Use plenty of...

I'd try taking one of the bolts to a hardware store or machine shop to get it IDed. Edit: My guess is that it is Grade 5. But I'm no expert. If it's zinc-plated, it's probably Grade 2. Edit:...

If you know the size (you already have that) and grade of the bolts, you can look it up in torque charts on the 'Net.

If you know the size (you already have that) and grade of the bolts, you can look it up in torque charts on the 'Net.

If they don't know how to fill the transmission, there is at least one thread on this site that tells how to do it without any special equipment from Nissan. There is a procedure in the FSM but it...

You can easily prevent the bluing from happening - never start the engine. :)

If they don't know how to fill the transmission, there is at least one thread on this site that tells how to do it without any special equipment from Nissan. There is a procedure in the FSM but it...

You'll want to disable the yaw sensor if you're going to be drifting.

A dead-blow hammer (https://www.homedepot.com/b/Tools-Hand-Tools-Hammers-Dead-Blow-Hammers/N-5yc1vZc992)* may help. *Just an example, not a recommendation.