SonicVQ

Hey!
I guess you are here to find out more about me... so here goes

I drive a G37 Sport Sedan (rear wheel drive, 6 speed manual) and have a background in electronics, auto mechanics, vehicle networks (CAN bus), C/C++ programming and micro controllers.

Most of my time is spent on automotive research (Nissan/Infiniti) and trying to help others.

Thanks for dropping by!

I was curious and went to Royal Purple's website... It looks like they don't have a manual trans oil for the 370?? http://www.the370z.com/attachment.php?attachmentid=147019&stc=1&d=1620781822

Really?? The same oil for the differential and manual transmission? Maybe the enoes folks have some magical oil... I have never seen one oil used for both. The friction requirements are very...

I went back to the beginning and re-read everything and I have a few thoughts: • If you are in the car and don't depress the clutch, press the Start button once. • Do you hear the steering...

I went back to the beginning and re-read everything and I have a few thoughts: • If you are in the car and don't depress the clutch, press the Start button once. • Do you hear the steering...

Note to all: With a "grounding kit" installed with these connections, you have bypassed the battery current sensor, which is used to determine the battery charge rate, based on how much the battery...

The PID is 0x1183. Since the returned value is 0-5, for gears 1-6, this formula should work: A = A +1. Then first should display as 0 + 1 = 1, second gear: 1+1 = 2, etc. You might need to put the...

Excellent troubleshooting! What an unusual issue. UpRev or EcuTek? What is your ECUID? Did the replacement ECU have the stock programming? I have seen that in some cases when the ECU is very...

Excellent troubleshooting! What an unusual issue. UpRev or EcuTek? What is your ECUID? Did the replacement ECU have the stock programming? I have seen that in some cases when the ECU is very...

Excellent troubleshooting! What an unusual issue. UpRev or EcuTek? What is your ECUID? Did the replacement ECU have the stock programming? I have seen that in some cases when the ECU is very...

No rush... this is a lifetime offer :)

No rush... this is a lifetime offer :)

Anytime... I enjoyed your posts at RomRaider...

Well, since you asked :) If that was my car, I would use a good/fast wireless OBD scanner (OBDLink MX+, VeePeak BLE) and a good OBD app, like OBDFusion (or OBDLInk) and datalog: • Cylinder #1...

Did someone say CAN bus???? That's been my area of research for the last 3 months :) (Updated with correction) The turn signal stalk is wired to the BCM. When the turn signal stalk is...

Did someone say CAN bus???? That's been my area of research for the last 3 months :) (Updated with correction) The turn signal stalk is wired to the BCM. When the turn signal stalk is...