RJ MFG

Hello, Not sure if you guys offer engine builds for 08 350z HR's ? I am looking to get a complete built motor for my boosted 08 350z HR. Looking to run 680-750hp some what reliably with all supporting mods of course. I'm really not sure if I should be looking to go overboard and go closed deck stroker ect ect. Or if I should just keep it simple and easy utilizing OEM parts for the build and just doing high end pistons/rods/head bolts/studs and so on. I figured your shop would have more experience with whats best for my power levels/goals. Financially I am already prepared for the build and by no means am I looking for a exact quote but would like to know a $ range and what you think would be better as far as keeping it simple or going all out.

Best,

Brandon

https://scontent-ort2-2.xx.fbcdn.net/v/t31.0-8/25439997_10210347029663384_4194600802315270841_o.jpg?oh=d0a5f3cc68a8746751f4549abcb698df&oe=5AB8CB94...

[QUOTE=TechnicZ;3715461] That is the injector ports. Injectors we will be supplying with the kit. Everything bolts from the inside. A lot of time and consideration went in to how to install this...

getting a little ahead of schedule ;) Preview of the rough Fuel Rail Stack: ...

That's why we are posting the pictures here.

That's why we are posting the pictures here.

https://scontent-ort2-2.xx.fbcdn.net/v/t31.0-8/25439997_10210347029663384_4194600802315270841_o.jpg?oh=d0a5f3cc68a8746751f4549abcb698df&oe=5AB8CB94...

UPDATE: We are cutting the second unit tonight at a faster speed (closer to production speed). We are focusing on the first operation (top side). And should have it done no later than Friday. We...

For those looking for an update this was from last night. We started on the lower plenum then found out we had a slight offset off on the cut. i.e. we were cutting un-needed raw material. we are...

Top side is finished. Now we flip it over and finish the bottom and runners! ...

[QUOTE=TechnicZ;3715461] That is the injector ports. Injectors we will be supplying with the kit. Everything bolts from the inside. A lot of time and consideration went in to how to install this...

[QUOTE=TechnicZ;3715461] That is the injector ports. Injectors we will be supplying with the kit. Everything bolts from the inside. A lot of time and consideration went in to how to install this...

[QUOTE=TechnicZ;3715461] That is the injector ports. Injectors we will be supplying with the kit. Everything bolts from the inside. A lot of time and consideration went in to how to install this...

[QUOTE=TechnicZ;3715461] That is the injector ports. Injectors we will be supplying with the kit. Everything bolts from the inside. A lot of time and consideration went in to how to install this...

Top side is finished. Now we flip it over and finish the bottom and runners! ...

[QUOTE=TechnicZ;3715461] That is the injector ports. Injectors we will be supplying with the kit. Everything bolts from the inside. A lot of time and consideration went in to how to install this...