redondoaveb

Hey man, love your build! You've inspired me to build mine! I'm going to go for a Tomei with cat deletes and maybe some red JNC wheels like yours!

Hey brotha,

Currently installing the topgunz SC kit, and going the route of installing a external wastegate to help with in cabin boost control...Saw on one of the threads you went the same route...you happen to have a picture or explanation of this? just dont want to cut into the wrong piping if their is a better placement as its pretty tight in our bay with this kit

What size is your walbro fuel pump?

Hello, you said you followed me on Insta, what is your instagram?

Which Southbend Clutch are you running, and would you recommend it for a daily driver? I am ordering parts for my ACE Supercharger set up, and I am having a hard time with picking a clutch. I will be running e-85 and anticipate getting 420-460 rear wheel torque. I have a 10 mile daily commute in Chicago traffic.

Hey man, I finally received the switch. I have a question about your wiring. It's been a while since my electronics class so, bear with me. How did you wire up the switch to enable the halo light as well?

I'm guessing Common is connected to one end of the spliced Yaw Sensor Wire, and the other end is connected to Normally Closed. How did you wire up the halo light on the switch? Thanks for any help.

PM sent.

Would it be possible to get this with a black leather boot with white stitching?

Gorgeous piece GLWS

So, the goal is 200mph with a Fast Intentions kit? What are the specs of the build? I don't really see anything in this thread pointing me to think it's going to happen. I'm working on a similar goal...

It's all good, I need to write an update on just installing a new supercharger! For your situation, first question how long have you had it? 4-5 Psi seems really low to me. Sounds like a boost leak...

Was chasing a small gremlin today, car seems mechanically fine, might be in the tune, I’ll get that checked out soon. While the car was up on the Jack l, decided to install my carbon fiber side...

Ok, small updates are better than nothing IMO. The radio, Tinker Electronics and dash (mostly) are back in. The temporary dash looks much better than anticipated. I'm happy with the looks... Now I...

https://i.imgur.com/Z21QGu2l.jpg

Changed over to LS3 knock sensors, deleted the Gen 3 in the valley. New valley cover plate on its way. Swapped over to gen 4 front timing cover and 4x timing gear with the appropriate cam position...

Your VQ wishes it had this sexy bitch riding on top. https://i.imgur.com/09Yh9pvl.jpg

I have a plan to pop the mold now. I'll need to make a metal jig and weld in large bolts on the back side of the jig that will allow bolts to enter the back side of the mold. The mold will need to be...

Build done, first start (but MP4 is too big to attach). Just waiting on dyno operator and tuner to return from summer break and we'll put a tune into it and then we are off testing.

Small GTR Gauge update: The GTR has a gauge labelled "Transmission Oil Pres", which isn't that useful on the 370. BUT, wouldn't it be nice to have something else in its place? Maybe something like...

Main take away... We're almost done. What a wild ride guys! Long a$$ time coming and I appreciate all the input over the years. I went from not knowing sh1t to barely knowing sh1t. :)

As mentioned before, I needed to get the O2 bungs marked off. That was done and I drilled out the pipe with a hole saw. I cleaned up the bungs and the pipe really well and then Dave tacked both of...