NorthStyle

Hello,

Wanted to let you know if you ever decide your considering letting go of your ganadors please keep me in mind. I'm def interested and may be for a while till I source a set.

Hey

Hi,
ich lese gerade du fährst das Juke Nismo Lenkrad in deinem 370z.
Ist das echt komplett gleich bis auf den Airbag?

Viele Grüße aus Köln

The only thing I don't like about fitting the non-Nismo to a Nismo is that it has a cutout/indent for the 3rd brake like and the pre-13 or 14s don't have one. Might not be a big deal for some but I'd...

They will fit if you have a matching header (Z1/Momentum). I have 350Z DE ART pipes paired with 350Z DE Momentum headers... if you had a VQ35HR G35 (not sure which engines were setup with which Gs),...

So, found the following diagrams which should be extremely useful to getting this sorted: http://i690.photobucket.com/albums/vv263/NorthStarJewelz/factory1_zpsbpjgzb7q.jpg...

Same... I keep seeing ones that I like, then end up buying them because they look cool, just not cool on the car. Got a nice collection at this point.

The only bad part about "theoretical" builds is that you don't have any actual parts on hand to measure... which is probably the most important part of an install. A sub + enclosure, and an air setup...

Yunique LED can do taillight modding https://www.yuniqueled.com/collections/350z https://www.facebook.com/Yuniqueled/

Yes, everything I mentioned in my previous post I have in addition to NST pulleys, Momentum headers, Motordyne ART pipes, Fast Intentions exhaust and GTR injectors. Review-wise the intakes are...

Here's the listing where I picked mine up at: FOR NISSAN 350Z/370Z/SENTRA/TITAN DUAL USB POWER ADAPTER 12V DIRECT PNP UPGRADE | eBay...

You shouldn't need a puller for the wheel. I was able to remove mine pretty easily without one.

What rear interior parts do you have? I'm looking for the hatch carpet and slip (not sure what the thin cover under the carpet is actually called).

Yes, it's that simple.

Sounds like you want either Pilot Super Sports or Pilot Sport 4S

I always base my wheels off of measurements. In your case, since the difference is the same (9.5 & 10.5 vs a 10 & 11) I'd go with a 275/305 combo as the difference of 1" is 25mm so you could shoot...

You shouldn't need a puller for the wheel. I was able to remove mine pretty easily without one.

Not boosted, but I have the AEM Failsafe (does boost/wideband) and uses the Bosch 4.9. Not many miles but seems pretty accurate so far and have had positive experiences using AEM AFR gauges in my...