jrb55gh

JRB,

As you may or may not know, the Ecutek advanced RaceRom features for the Z are now out. Joe at Dynotronics is looking for a test car to run the features.

Would you be interested? If so, please contact Joe directly.

Let me know.

Thanks.

My bare pan with plugs arrived today unharmed. It is a beautiful piece. The little one-way flapper baffles are precision fit, move with no bind and make solid click against the stop when slamming...

My bare pan with plugs arrived today unharmed. It is a beautiful piece. The little one-way flapper baffles are precision fit, move with no bind and make solid click against the stop when slamming...

My bare pan with plugs arrived today unharmed. It is a beautiful piece. The little one-way flapper baffles are precision fit, move with no bind and make solid click against the stop when slamming...

Right on. Back in 1993 I had a CBR900RR tuned to 120 whp. Rider and bike weighed in at about 650lbs, 5.5 lbs/hp. Yes it was quick, 0-100 in about 6 seconds. Passing on 2 lane roads, no problem. The...

105701105700It is not likely that the baffles would be removed very often so locking fasteners would be good to do the job of safety wire in the instance. Here are pictures of a couple of flange...

Check the photos in post #126 in this thread. Notice the slots in the shield under the crank. One edge of the slots is bent up toward the crank. These edges are meant to strip oil spinning with the...

The VQ does already have oil scrapers in the shield under the crank! This makes the oil pan's job easier. Thanks for those pictures.

One more feature request to evaluate: Fabricate the top horizontal plate baffle to overhang the outer edges of the vertical baffles in the pan by about 0.75" to help prevent oil from rolling over...

Access ports are great idea. Most owners or enthusiasts will be on top of their oil changes and oil quality. Racers will be no problem since they will be changing their oil very often. The daily...

I will repeat here what I recently PM'ed to another forum member: I chose ecutek software because it allowed the tuner to have direct control of the 370z throttle response and ignition timing....

I will repeat here what I recently PM'ed to another forum member: I chose ecutek software because it allowed the tuner to have direct control of the 370z throttle response and ignition timing....

I will repeat here what I recently PM'ed to another forum member: I chose ecutek software because it allowed the tuner to have direct control of the 370z throttle response and ignition timing....

Hi All, I am in Lockhart working the shifter kart street races today and tomorrow. If any Z owners are out and about and interested I can show you through the pits of some of the race teams. Also...

Hi All, I am in Lockhart working the shifter kart street races today and tomorrow. If any Z owners are out and about and interested I can show you through the pits of some of the race teams. Also...

I Googled "aluminum aircraft hinge" and came up with this link: Extruded Piano Hinge On Wicks Aircraft Supply...