husam2012

HI in the ecutek tuning manual in the the vvel section there is a minimum and maximum table. How do there get 2.88 degress cranshaft angle at 2400rpm from the minimum table. I can't see how they got that value.

Pad you for injectors and manifold

Hey do you still have that CJM Dual Pump fuel basket and FI Headers ?

Hey bud. Did you sell the os giken. Flywheel/clutch combo?

Just bought my GTR turbos with manifold I was wondering do they bolt right onto our blocks? or how did you do it if I may ask?

Hey what’s a email I can send my most 2 recent logs to you at

Buyer of perfect condition drivers side window switch panel including switches. Great communication. Buy with confidence!!

Can you PM me the VIN #? Thank you

Selling a complete Fast Intentions S3 Twin Turbo Kit – asking $8,900 or best offer. Freshly rebuilt Xona turbos (still sealed from Xona) Downpipes, wastegates, blow-off valves, and all...

I wouldn't mess with partial throttle VTC timing as you can lose a considerable amount of MPGs and not gain much. The factory map is pretty well dialed in for that region. As for WOT, it will depend...

Definitely does not have the same problem. They have an external slave cylinder in the new Zs.

Definitely does not have the same problem. They have an external slave cylinder in the new Zs.

In my opinion, the only worthwhile options are the Z1 shorties and the PPE headers. The FI long tube headers (LTHs) are not equal length and don't flow well. I initially had the Z1 shorties on my...

Good evening, I was looking for a similar post with accurate torque specs and didn't find anything on the forum so here's what I made for my shop to save time and trouble. TORQUE SPECS...

Good evening, I was looking for a similar post with accurate torque specs and didn't find anything on the forum so here's what I made for my shop to save time and trouble. TORQUE SPECS...

Did you get a new tune file to add the flex fuel sensor as an input? If not, it will never show anything.

The issue is definitely with the installer. We've sold over 20 kits that hijack the rear o2 for input and not a single one had issues or codes. Ecutek is the way to go for 99% of builds, but most...

The issue is definitely with the installer. We've sold over 20 kits that hijack the rear o2 for input and not a single one had issues or codes. Ecutek is the way to go for 99% of builds, but most...

The issue is definitely with the installer. We've sold over 20 kits that hijack the rear o2 for input and not a single one had issues or codes. Ecutek is the way to go for 99% of builds, but most...

Currently tuning a 370Z with this kit. Honestly, great job. It's definitely a tight fit but the usage of a great flowing stock/upgraded header paired with twins makes for really low backpressure and...

I installed one at our shop in MI and so far it feels pretty good. Pedal feel seems to be even better than most other options. Kit is well made.

I installed one at our shop in MI and so far it feels pretty good. Pedal feel seems to be even better than most other options. Kit is well made.