husam2012

HI in the ecutek tuning manual in the the vvel section there is a minimum and maximum table. How do there get 2.88 degress cranshaft angle at 2400rpm from the minimum table. I can't see how they got that value.

Pad you for injectors and manifold

Hey do you still have that CJM Dual Pump fuel basket and FI Headers ?

Hey bud. Did you sell the os giken. Flywheel/clutch combo?

Just bought my GTR turbos with manifold I was wondering do they bolt right onto our blocks? or how did you do it if I may ask?

Hey what’s a email I can send my most 2 recent logs to you at

Buyer of perfect condition drivers side window switch panel including switches. Great communication. Buy with confidence!!

Edit: Here's a walkthrough of the kit! https://www.youtube.com/watch?v=dMrwS4ru2ak Hello everyone out there! I had an idea a while back and today i thought, why not?! Basically, my goal is...

Everything's out there, just gutta use the search function. But anyways, "short tube" don't give as much gains as the long tube headers but are way easier to install. Long tube headers take at...

I have a ebay axleback muffler that is 3 years old and still shiny as ever. looks almost new when cleaned up. IMO they're worth it if you don't plan to keep the car for longer than 5 years. Who does...

Everything's out there, just gutta use the search function. But anyways, "short tube" don't give as much gains as the long tube headers but are way easier to install. Long tube headers take at...

Everything's out there, just gutta use the search function. But anyways, "short tube" don't give as much gains as the long tube headers but are way easier to install. Long tube headers take at...

Everything's out there, just gutta use the search function. But anyways, "short tube" don't give as much gains as the long tube headers but are way easier to install. Long tube headers take at...

This guy is a joke :bowrofl::bowrofl: Who sends a brand new 45k car into a shady shop to install a "bulldog tune"?! On top of that, his attitude shows a lot about who he is. No wonder he got...

Welcome and congrats! I' would love to see your car someday. I'm located in West Bloomfields.

Forgot to post this last week, but i second time at the dragstrip and i ran 13.3 @105 with stillen gen3's and an axleback. https://www.youtube.com/watch?v=TLVBsrJLix4

I would recommend buying a used engine. You can even get a decent one from eBay for less than 3k, and about 1k for installation. Probably your best choice unless you like spending more than the...

Not sure, I've only been there twice lmao

Forgot to post this last week, but i second time at the dragstrip and i ran 13.3 @105 with stillen gen3's and an axleback. https://www.youtube.com/watch?v=TLVBsrJLix4

Forgot to post this last week, but i second time at the dragstrip and i ran 13.3 @105 with stillen gen3's and an axleback. https://www.youtube.com/watch?v=TLVBsrJLix4

I have the Rockford Fosgate P300-12, left over from my previous car when i sold it. I installed it by getting all the power into the trunk which wasn't too bad, then using a line converter and...