gomer_110

Do you have any suggestions for spring rates? I am running motion control non-remote 2 ways with 12kg front and 10kg rear(stock location). Feels really soft to me and i get a lot of body movement. Rear seems pretty loose as well, i removed my rear sway and have 1/16th toe total. I plan on upgrading to the new tomei 1.5 lsd. In my current setup i overpower the sports oem lsd all the time on tight corners.

Thanks again.
Ryan

Having a hell of a time finding suspension settings to run the nismo 19x10.5 et23 wheels with 285 tires square. I found stuff of people using the rims but with smaller tires and no camber angles listed. I plan on running this setup in autox for stu class. Thanks

What was the cost of parts and install for clutch, CSC and flywheel upgrade, if you don't mind me asking?

Hi I have seen ya putting ur sway bars from eibach . And my question is "Are the nismo sway bars not good enough or you are looking at the better handling with eibach?" I think u did front and rear right. I went to a track race a couple weeks ago(my first time). wat happened to me was my nismo was stripping because I was on high speed then brake to make a hard corner. My rear wheels spin twice and I think it's partly cause of my sway bars. I am here to learn so your information would be super helpful. Thanks

Hi, just wanted to say hi. I'm in BG, if you're ever in the area hit me up or if there are any events in Toledo to gather. Thanks.

I'm using these: https://farm6.staticflickr.com/5574/14729680815_47e07d2a03_z.jpg

No, you cannot. It is next to impossible to add Synchro-rev after the fact.

It was crazy. Very hard on brakes for sure. After losing 4th when ST traffic backed me up in the chicane... I was able to repass fir 4th in the turn 7-8-9 complex. I couldnt outbrake him... But...

If there's ever a new Supra, it will be 100K+ and a direct competitor with the GTR.

Why would you turn off SyncroRev?

I may have hit the mother load. I found a way to access Nissan's proprietary PIDs. They aren't found using the standard mode $01 described here (http://en.wikipedia.org/wiki/OBD-II_PIDs#Mode_01)...

I did a little experimenting with DotNetBar gauge controls. It isn't pretty, but it's a proof of concept and they all update in real-time. ...

You realize this makes no sense? If him winning the STR Championship in a 350z mattered at all to the SEB... Do you think the 370z would still be classed in STR? After all, all of your other posts...

By definition, engaging in driving behavior in order to ascertain which car is fastest and doing so on public roads is street racing. Oh, and I reported this thread to the moderators. Have a...

A somewhat silly use for this also occured to me since we can see the status of various buttons and switches in the car by monitoring the CAN bus. Here are 2 ideas: This can be used to enter a...

awesome work! I have been side tracked with other projects but this will save me a bunch of time when i get back to my carputer. I'm using a raspberry pi, bluetooth CAN (STN1110), 10-bit 8 channel...

I did a little updating and added new information, plus I put the bits in the proper order. My spreadsheet is now hosted on Dropbox to make it easier for me to keep it synced. ...

http://www.youtube.com/watch?feature=player_embedded&v=uXdFKcETEPg

I got to find a different forum name ! hehe just in case I become a vendor ;)

Oh. Lol... Octet, "sub'd" is probably members saying they're subscribing to the thread, not seriously interested in the product. (I'm sure people are interested, but only if this thing makes MASSIVE...