gomer_110

Do you have any suggestions for spring rates? I am running motion control non-remote 2 ways with 12kg front and 10kg rear(stock location). Feels really soft to me and i get a lot of body movement. Rear seems pretty loose as well, i removed my rear sway and have 1/16th toe total. I plan on upgrading to the new tomei 1.5 lsd. In my current setup i overpower the sports oem lsd all the time on tight corners.

Thanks again.
Ryan

Having a hell of a time finding suspension settings to run the nismo 19x10.5 et23 wheels with 285 tires square. I found stuff of people using the rims but with smaller tires and no camber angles listed. I plan on running this setup in autox for stu class. Thanks

What was the cost of parts and install for clutch, CSC and flywheel upgrade, if you don't mind me asking?

Hi I have seen ya putting ur sway bars from eibach . And my question is "Are the nismo sway bars not good enough or you are looking at the better handling with eibach?" I think u did front and rear right. I went to a track race a couple weeks ago(my first time). wat happened to me was my nismo was stripping because I was on high speed then brake to make a hard corner. My rear wheels spin twice and I think it's partly cause of my sway bars. I am here to learn so your information would be super helpful. Thanks

Hi, just wanted to say hi. I'm in BG, if you're ever in the area hit me up or if there are any events in Toledo to gather. Thanks.

Never leave VDC off on the street Drive safe

With it off, it is very likely you would have spun. If you're going to experiment with it off, don't do it on the road. If you can't/won't AutoX it, at the least go to an empty parking lot without...

Z1. Ask for Jon, tell him Andrew the ******* sent you

Shouldn't matter anyways for alignment? You can even do alignment on those metal stands that attach to the lugs in place of wheels.

How the SoCal crew gets to Nats: https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/10603434_673018406115938_8189085982184172052_n.jpg

I have also disabled this code (P2A00) in my tune, and I have not had any problems with it off.

Uhmmmm. Because distracted by RACECAR?! :happydance::driving:

so lets get them made...........!

hi... and GO BUCKEYES :D

Having run against cars using the Nitto and R888 vs. my A6's in ESP. I don't know why you wouldn't be considering the A6/7 or R1S...unless you don't care about being competitive against cars that...

Run a square wheel and tire setup first 18x10.5 w 285/35/18, stiffest sway in front softest rear is the best way to go with spl front and rear arms and a good track alignment

Everyone email.

Or they could go engineer us a rear bar option that was actually weaker than stock. Then the set would be worth it.

Reading all this WTF Hotchkins? I emailed with no response awhile ago. No one wants their rear bar is seems or have to pay for it. Do we really have to buy both and trash the rear? No ones going...

Maybe You haven't searched hard enough. Megan370z and synolimit could answer your questions