![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() gbrettin
|
Last Activity: 05-14-2026 12:45 PM
- User Lists
Likes Given
3929 Likes
-
gbrettin liked post by Rusty On thread : Mr. G. Brettin's Slow Motion Leg HumpFlying valve springs hurt like hell. Got hit right in the nipple. :shakes head:Liked On: 08-30-2019, 02:21 PM
Posted On: 08-30-2019, 01:48 PMgbrettin liked post by sirnixalot On thread : My 2010 SportWell no pictures but progress was made. The exhaust from the Y back is all finish welded and the rear O2 bung was welded into the passenger down pipe as well. I clocked the valve motor as high as...Liked On: 08-30-2019, 11:34 AM
Posted On: 08-27-2019, 08:33 AMgbrettin liked post by sirnixalot On thread : My 2010 Sporthttp://www.the370z.com/members/sirnixalot-albums-engine-2-picture103133-46fa0cb6-6e13-41b0-93f7-a23df9e5e8dd.jpeg Got the exhaust tacked up today. It’s the best ground clearance I can get. It’s...Liked On: 08-30-2019, 11:34 AM
Posted On: 08-24-2019, 08:41 PMgbrettin liked post by axmea? On thread : axmea?'s not-much-of-a-build thread - more like a photo logBeen having shifting issues. Grinding, notchier than usual, stiffer, inconsistent pedal feel. Manual guys know the feeling. Noticed the fluid in reservoir reduced. Filled it up twice in the last...Liked On: 08-30-2019, 11:33 AM
Posted On: 08-30-2019, 12:35 AMgbrettin liked post by sirnixalot On thread : Mr. G. Brettin's Slow Motion Leg HumpI'm sure you have this covered but are your lifters solid? I helped a friend do this with his LS RX7 swap and we ended up ordering the push rods longer than required. Once we started up and the...Liked On: 08-30-2019, 10:15 AM
Posted On: 08-30-2019, 10:13 AMgbrettin liked post by JARblue On thread : Mr. G. Brettin's Slow Motion Leg HumpSexy!! Might as well go neck deep while you're in there. At least you'll still be able to breathe :driving: We are happy to help :tiphat: Nothing like support when you need it most :tup:Liked On: 08-27-2019, 08:06 AM
Posted On: 08-26-2019, 09:31 PMgbrettin liked post by Elmo370z On thread : Jim Wolf Cam testing for the VQ37VHR -- Results inside!Cheap heads. Don’t know what year these came off ofLiked On: 08-26-2019, 08:05 PM
Posted On: 08-26-2019, 05:47 PMgbrettin liked post by jchammond On thread : Mr. G. Brettin's Slow Motion Leg HumpMine has already been sitting 4-months :wtf2: Hope to be dissembling in the next 10-weeks :ugh2:Liked On: 08-24-2019, 09:31 PM
Posted On: 08-24-2019, 08:43 PMgbrettin liked post by jchammond On thread : Mr. G. Brettin's Slow Motion Leg Hump2-button rig,,,good for line-loc & transbrake :tup:Liked On: 08-24-2019, 09:31 PM
Posted On: 08-24-2019, 08:46 PMgbrettin liked post by madwi On thread : Madwi's picture dump and crapBored with construction, tossed the mesh on one side of bumper. https://i.imgur.com/IWeo8tDl.jpgLiked On: 08-24-2019, 08:14 PM
Posted On: 08-24-2019, 07:33 PMgbrettin liked post by sirnixalot On thread : My 2010 SportWell I finally got the covers installed. But even that wasn't without panic mode So you'd think if you are assembling cylinder heads for these as a builder you'd know the tensioner's need to go...Liked On: 08-23-2019, 11:02 AM
Posted On: 08-06-2019, 07:44 AMgbrettin liked post by sirnixalot On thread : My 2010 Sporthttp://www.the370z.com/members/sirnixalot-albums-engine-2-picture103108-56c796ad-9d2d-4e07-b8ef-9c6eb01353ca.jpg Got the catch can lines cut and assembled today. Pissing down with rain and didn't...Liked On: 08-23-2019, 11:02 AM
Posted On: 08-20-2019, 11:33 AMgbrettin liked post by sirnixalot On thread : My 2010 SportTaking about 2 hours a night after work is working out pretty well as far as progress goes. http://www.the370z.com/members/sirnixalot-albums-engine-2-picture103123-photo5114252438679955568.jpg ...Liked On: 08-23-2019, 11:00 AM
Posted On: 08-23-2019, 07:53 AMgbrettin liked post by Spartan 1771 On thread : Updated Nismohttps://i.imgflip.com/l3hgm.jpgLiked On: 08-23-2019, 10:58 AM
Posted On: 08-23-2019, 10:46 AM
All times are GMT -5. The time now is 03:58 AM.





Likes Received