DR_

Wow that is impressive! Very nice, and shows where I need to work to pick up speed as well as getting my line & braking more consistent. Now the thing is I want to get back out now and not to wait for 6 mos! Thanks again.

Hi David. Do you have a kml file from HLT for MSR 3.1 that you could share with me? This is Google Earth map for one or more laps overlayed with corner & straight speeds and lateral Gs. I'm trying to figure out where I'm leaving too much meat on the bone besides the obvious (Ricochet & Big Bend).

Thanks,
Larry

Did you figure out what was causing the NST Crank Pulley failure?

It seems to me that putting the thermostat and pressure on the oil cooler would give some bad readings, especially if using a thermostatic sandwich plate.

You will need rear toe bolts (https://www.splparts.com/store/product-info.php?pid291.html) to get the toe adjustment back into spec. The toe out you have is what hurts your tires more than the camber.

Installed 8" springs that I already had but will switch to 6". http://www.the370z.com/members/dr_-albums-miscellaneous-pictures-picture82488-new-spl-mid-link-camber-link-lockout-bolts.jpg

Installed 8" springs that I already had but will switch to 6". http://www.the370z.com/members/dr_-albums-miscellaneous-pictures-picture82488-new-spl-mid-link-camber-link-lockout-bolts.jpg

I think he means these. They should help. http://ep.yimg.com/ca/I/ntnsracing_2266_241631806

Wf17v6QBtw8

Wf17v6QBtw8

Wf17v6QBtw8

Hmm, Continental Tire Challenge to Pirelli World Challenge, what would they possibly need to change?? :rofl2:

Great race! aX6rd0hafrA

Great race! aX6rd0hafrA

Yes the QDF13L is the one you want. I will warn you though, the Quaife is only a small improvement over the stock VLSD and you will still get wheel spin out of corners. I wish I went with a clutch...

With the Hard Brakes titanium backing plates they don't squeal on the street near as much.

Love the pictures of the Z's in front of the Mitsubishi Zero.

OMG no the antifreeze is not "air coolant". The condenser is combined into the radiator and when you took off the old radiator all the Freon escaped, which is highly illegal btw. Anyway, you need to...