thanks man.... :D

i hope so too :roflpuke2: my friend with a G37 here had his master go out... im keeping all my fingers and my toes crossed that its only the master...

finally got a twm SS :D now im kool like galeforce... he gave me a outstanding deal shipped.... :D cant wait till it arrives...

:tup: nice short shifter choice

:D thank you kind sir....

http://sphotos-d.ak.fbcdn.net/hphoto...63505453_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...49791891_n.jpg

http://sphotos-b.ak.fbcdn.net/hphoto...90008388_n.jpg

http://sphotos-h.ak.fbcdn.net/hphoto...26235607_n.jpg

so we worked on my z today.... and guess what it WAS the master.... man the clutch feels so new again.... real smooth..... :D anyways i think i know why it gave out... all im gonna say is if you didnt bleed ur clutch fluid yet BLEED IT!!!! there was so much crap in my lines and master it was ridiculous.... we did a gravity bleed first and then we went crazy bleeding all the black stuff out... we went through about half the bottle of some synthetic DOT4 then bleed it again with some MOTUL RBF 600 good stuff.... i was gonna install the clutch SS line but i decided to hold off until my TWM SS comes in well do it again and rebleed the system to make sure all that crap is outa the system... i was really suprised with how much dirt was in there at 10k.... my company trucks put this car to shame.... they have more than 40k on them and the clutch fluids arent as dirty as the Z :shakes head: anyways changing it out wasnt to bad... i did have a hell of time fitting under my dash..... ive never experienced so much flexibility in my entire life.... those two nuts are high up in there and pretty much so much crap blocking it from either side including this massive plate thing. I dont even know what the point of that plate blocking the two nuts were for.... a swivel is definitely ur best friend on this one.... :) anyways looks like i dodged the bullet.... so back to modding for the Z!!!! :D

That's awesome bro, glad you got things fixed up :tup:

:driving:

Back in the saddle again.

Great news. :tup:

thanks guys :) im just happy i can drive her again.....

so my silicone cap offs finally came in last week and since my dad is off island i got some free time on my hands... i did a throttle body coolant delete mod... basically it warms up your throttle body so it dont freeze shut during winter.... it never gets cold on guam and i really would like to eliminate as much useless crap there is in our engine bay so this was one of them

http://sphotos-a.ak.fbcdn.net/hphoto...23948519_n.jpg

http://sphotos-f.ak.fbcdn.net/hphoto...82058272_n.jpg

the demon hose between the firewall and block wasnt as horrible as i would have imagined..... it did however take me about 30 mins to tighten the stupid hose clamp down there.... and my hand was cramping from the akward position i had to be in to tighten it... you absolutely cannot see wth your tightening but other than that everything is easy as pie.... i opted for silicon caps over rubber ones because they last longer :tup: and silicone is the way to go :tup: if anyone is interested i can post a link where i got it....

here is the link to WSTAR DIY

http://www.the370z.com/diy-section-d...nt-delete.html

so enough with the boring mods and lets get the ball rolling with some real JDM hotness.... there is a show coming up... and im thinking of entering extreme JDM.... since my clutch ordeal was dodged im thinking of getting a special JDM item for the show... ive contacted my buddy and followed up with the top secret parts.... :( well no update with my brackets or my titan cans.... im not to optimistic about it arriving on time.....they did say 2months so i cant blame them, i am bummed though.... i told him that i want and need something crazy jdm... he sent me a picture of some craftsquare mirrors i told him for that price i dont think its something that someone would particularly realize and notice.... he then sent me a pic of this and i flipped....

http://www.zeal-performance.com/medi...ar_01jpg_1.jpg

he says

"There are two types of Chitanba.
Type 1
Hooks can be fixed with a full harness seat belt
Type 2
Fashion titanium bar

i absolutely love how honest he is... he asked me if im not going to race or if i have plans to race my z... i told him realistically my zed will be a show case for the rest of her life so i wont be getting harnesses MAYBE seats but no harnesses for me... he told me to just get the type 2 since its a show car plus its cleaner and cheaper than the race one...

im hoping and crossing all my fingers and toes that he tells me tomoro that it can make it and ill buy it tomoro... wish me luck fellas....

Good luck man! That does look nice

thanks man ^^^^ i need your guys advice which one do you think i should get? type 1 or type 2?

they both look identical but type 2 feels fake to me lol... its hallow thats why while type 1 has a chromoly tube.... realistically i will never race you guys probably know that but im gonna ask which one should i get? honest opinions please or am i retarded for wanting the type 1 version? :bowrofl:

Depends how deep your gold mine is!

my man my gold mine is down to its dust lol... realistically its 200 bucks difference...... the last thing i wanna hear from someone at the show is i have a replica titan bar cuz its hallow :bowrofl: that would definitely make me mad :roflpuke2:

Then suck it up and go for the "gold" version 1

In the end you will be happier

I would get the one with hooks for harnesses. I know you say you won't need a harness, but once you get the seats, you'll want the harness to finish the look. :tup:

:iagree: I would go with type 1, especially for you buddy. I don't think you will be happy with version 2 in the end :tup:

Unless he likes spending money twice. I've been there and will never do it again.

type 1 for sure

I'm going with Type 1, and i know you're gonna do the same ;) in the end, we're both love the look of a proper strapped in harness to titan bar :tup:

Yes, link please to the hose and the clamps...thank you

thats why i f*cking love you guys.... type 1 it is.... let hope this bar makes it for the show..... :D ill update it you guys today... he said he would contact me today.... :)

Silicone Hose Intake Vacuum Stop End Cap Bung Plug 8mm x 4 Black | eBay

you need 2 packs... because each side uses 4 pieces :D the clamps i just bought at the auto part store.... get the 1/4 sizes :tup:

and they have the type 1 bar in stock!!!!!! wooooooooo gonna order it next week fellas!!!! i gotta pass this one under the radar..... lol and i maxed out my paypal so i gotta get verified first bwahahhahaha

in other news i got this nifty idea of converting a CF mishimoto oil catch can to my power steering reservoir :D... it works in my head but i hope it works in real life haha

Do it up brotha....

Dude PM me the price, quick!

Damn, I need to get on your level.

I see you already ordered but just to confirm go with type 1. Also shoot me the details I may go this route because I am shopping for harnesses now.

done!!!! i sent you the direct cost in yen because im lazy to convert to dollar right now :roflpuke2:

thanks man i really regret wasting alot of money till i got to this level.... originally it was a budget build.... i had that mentally all the way until i realized that if you make a budget build some other guy will eventually copy you... so shoot for the highest possible mod.... :tup: in the end youll never be dissapointed... :D

type 1 it is man.... lol i really wanted to just get type 2 but then everyone on this forum and my local friends was like "BRO.... dont do it... your gonna tell us later on you gonna get type 1 cuz ur not content" :roflpuke2:

btw guys there is a brand new TK Hebi bebi knob on island and its for sale!!!! i absolutely HATE this month lol.... the knob is pretty cheap too... lets hope i can get that too :facepalm:

I like that knob, how much are they looking for? :stirthepot:

200 local and its brand new.....

So I guess this means our deal is off? LMK next time.

hey jon sorry it was kinda like and idea.... its not 100 percent gonna work but ill let you know... :tup:

NPs... I'm gonna back out after doing some research. Hope it works out for you though:tup:

update i installed my b pillars... and i pull out my power steering reservoir and im in the process of fabbing one.... the mishimoto idea isnt working out :(

http://sphotos-h.ak.fbcdn.net/hphoto...11381146_n.jpg

sucking out the old fluid outa the reservoir was pretty funny i used an baby syringe (the light bulb thing you use to suck out mucus outa the babies nose) ill upload the pic soon...

http://sphotos-b.xx.fbcdn.net/hphoto...30963133_n.jpg

http://sphotos-b.ak.fbcdn.net/hphoto...40182267_n.jpg

http://sphotos-b.ak.fbcdn.net/hphoto...96534346_n.jpg

i take back what i said 20 mins ago i figured it out and it does not rub :tup:

I like those pillars are they covers or full replacments?