>>>>>Puckshaw's Boosted Performance Twin Scroll Single Turbo Build<<<<<

Motion Lab

Big boy housings make big boy power! We did 496whp at 7.8psi on the S&R Performance kit, look forward to comparing the power delivery and power output between the two kits once our friend Puckshaw finishes his installation.

Looks good so far, great job tackling this project yourself!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Boosted Performance

I think S&R uses the V-band turbine housing though. Those are small (T3) housings...compared to this 1.15 a/r T4. IMO the T3 housings and the V-band are too small for the VQ37VHR, as they don't flow enough. I did a bunch of EBP testing, and know that the T4 is the only way to go, since these engines have a very high VE even at 7000rpm. That is a lot of exhaust gas you are trying to push through, so the housing has to be large.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Motion Lab

Yep, it was a .82A/R v-band if I'm not mistaken(dont quote me on that). They work well on the 4cyl but yeah the VQ37 is a beast and I can certainly see a benefit from the larger turbine.

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

puckshaw

Can't wait to get her strapped to the dyno and see what she makes

__________________
>>>>>BP Build Thread<<<<<