Nut_N_Much Journal

Baer383 · 09-28-2013, 09:37 AM

Quote:

Originally Posted by Nut_N_Much

Stayed home from work today.. Made this ! Its a TPMS Bomb. Had a customer ask how to turn off his dash light. His rims wouldn't allow him to use the sensors so I made this. Throw all 4 in here and pressurize it to 40 pounds, throw it in the trunk and call it a day.. Anyone needs this let me know..

I didn't want to take his dash apart at $80.00 and hour just for the light.

That is a great idea,the only drawback is it you got pulled over and for some reason they see it ,it kind of looks like a pipe bomb.

Nut_N_Much · 09-29-2013, 04:58 PM

Sunday has been very productive... Started with getting the drill press ready for Kelly. He was going to drill out the holes for the Strut Brackets everyone ordered. When he got here he said they weren't in the boxes the supplier shipped. Worked out great

we started working on Robs lights right away; got the body filler on and sanded smooth, just need to wet sand tonight and done.

Lunar-Eclipse came over at noon and we pulled his lights apart. Gave him a fresh paint job and color matched the shrouds to his 40th Edition Z. Tell you what man, I need a shop. Freaking creature fly's in and starts a trek through the freshly painted light. Damn it!!! Go walkabout some were else! Lights still look good, I just need a creature free paint area..

Went digging through my old photo's and found my truck. I miss that beast but the bank account is a hole lot better now I am not spending $240.00 a week on gas

.

Ordered some bolt on valve stems for my TPMS Bomb's. Looks like a few people really needed them. Who would have thought!!!! I made some stickers up that say RUN !!!!! in big letters to put on the side of these things. Might scale the size of the bomb down a little, 3inch tubing is a little beefy.

Lunar-Eclipse · 09-29-2013, 05:29 PM

Joe, you and Kelly did a great job and the lights look incredible. They change the whole look of the car.
Here are a few more pictures after I gave the car a bath.

Here is a closeup so you can see the difference between the black housing and the 40th gray turn signal shroud. The projector shroud got the same treatment.

It was good to meet you guys and Joe thank your wife for the snack for me.

Nut_N_Much · 09-29-2013, 07:36 PM

Great shots, I'm gonna steel some for my album. Great meeting you brother, my wife thanks you for her Grocery Money

.

Awesome Z owner Joel AKA Lunar-Eclipse.....

Nut_N_Much · 10-04-2013, 09:20 PM

Kellyefields engine is done. We added fluids tonight, tighten down everything, installed the exhaust and fired it up. No Dash lights, running smooth at 1000rpms, warmed up and dropped to 700rpms.

He is gonna get the LEDs all wired up and should be on the road Sunday

New Engine Start Up - YouTube

.

Nut_N_Much · 10-10-2013, 09:48 AM

You got a crazy lookin toe

. Look like hobbit toe's

Quote:

Originally Posted by Lunar-Eclipse

Joe, you and Kelly did a great job and the lights look incredible. They change the whole look of the car.
Here are a few more pictures after I gave the car a bath.

Here is a closeup so you can see the difference between the black housing and the 40th gray turn signal shroud. The projector shroud got the same treatment.

It was good to meet you guys and Joe thank your wife for the snack for me.

Nut_N_Much · 10-13-2013, 05:12 PM

Got my rims and tires back today.. Also helped out Kelly prime his cooling system. Herd a knocking sound on the way over to his house and found that the sway bar connecting bolts were gone. The thing was just bouncing on the frame supports. Thats what I get for taking it to an alignment shop. Don't understand why they would need to remove the sway mounts. I got SPC adjustable camber arms and toe bolts.

Thank god the bushings and brackets are still there, just need 3 new bolts.

Lunar-Eclipse · 10-13-2013, 07:48 PM

Quote:

Originally Posted by Nut_N_Much

You got a crazy lookin toe

. Look like hobbit toe's

That was the most random comment. I really did laugh out loud.

Nut_N_Much · 10-14-2013, 11:29 AM

Little DIY for ya... My Sway Bolts were stolen by gremlins so I went to LOWES and got the bolts I needed. Also saw some grease fittings so I bought a few.

I drilled a hole in each bracket and tapped the hole to match the threads and pitch of the grease fitting. When I get under the car I'll make a small grove on the polyurethane bushing to allow the grease to disperse evenly under the bracket.

Started working on the Hood, should have the radius's cut today..Will update tonight.

Nothing new, I sure its been don before on the forum. Just thought it mad sense to do. Cut down on wearing out bushings for all you AutoX guy's.

Nut_N_Much · 10-14-2013, 05:07 PM

Got the hood cut today. Kelly wanted a 3rd vent down low. I had a bad feeling about this but Its been done. Funny thing is once you cut there is no going back so I made it work.

I think some cross sections will need welded in to sturdy up the hood for high speeds.

09-29-2013, 05:29 PM	#3 (permalink)
Lunar-Eclipse Base Member Join Date: May 2011 Location: Florida Posts: 125 Drives: '10 40th Anniversary Rep Power: 15	Joe, you and Kelly did a great job and the lights look incredible. They change the whole look of the car. Here are a few more pictures after I gave the car a bath. Here is a closeup so you can see the difference between the black housing and the 40th gray turn signal shroud. The projector shroud got the same treatment. It was good to meet you guys and Joe thank your wife for the snack for me. Last edited by Lunar-Eclipse; 09-29-2013 at 05:51 PM.

09-29-2013, 07:36 PM	#4 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Great shots, I'm gonna steel some for my album. Great meeting you brother, my wife thanks you for her Grocery Money . Awesome Z owner Joel AKA Lunar-Eclipse..... __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

10-04-2013, 09:20 PM	#5 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Kellyefields engine is done. We added fluids tonight, tighten down everything, installed the exhaust and fired it up. No Dash lights, running smooth at 1000rpms, warmed up and dropped to 700rpms. He is gonna get the LEDs all wired up and should be on the road Sunday New Engine Start Up - YouTube . __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

10-14-2013, 11:29 AM	#9 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Little DIY for ya... My Sway Bolts were stolen by gremlins so I went to LOWES and got the bolts I needed. Also saw some grease fittings so I bought a few. I drilled a hole in each bracket and tapped the hole to match the threads and pitch of the grease fitting. When I get under the car I'll make a small grove on the polyurethane bushing to allow the grease to disperse evenly under the bracket. Started working on the Hood, should have the radius's cut today..Will update tonight. Nothing new, I sure its been don before on the forum. Just thought it mad sense to do. Cut down on wearing out bushings for all you AutoX guy's. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
PG6Speeds Journal	pg6speed	Member's 370Z Gallery	19	12-21-2011 10:21 PM
Cmike2780's Journal	Cmike2780	Member's 370Z Gallery	9	06-29-2011 11:17 PM
tag journal with car color	bflosabre91	The370Z.com Feedback, Suggestions & Questions	1	05-12-2011 12:46 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM