Ya, it just sucks we pay so much and it is such a hassle to get it to work.
Well got the side skirts on and all the little tabs.. Cleaned the calipers and rims. I set the rims :eek: next to Mamas car just to see what it would look like. Not bad if I were a pimp:yum:.


http://www.the370z.com/members/nut_n...8-img-0645.jpg

http://www.the370z.com/members/nut_n...9-img-0646.jpg

http://www.the370z.com/members/nut_n...0-img-0647.jpg

that looks pretty good haha.... ^^^^^

tell me about it i mean we payed so much and then it dont fit right :( my driver side was 1 inch short to the door.... i felt like dying with that gap haha when i showed it to my body shop friend he told me "why do you enjoy giving my life stress with this car" haahahahahahhaha

whoever is making the mold has to remake it. FRP mold will wear over time so im sure that the mold they used is "out of shape" alrdy.

Joe why not set a Z Tampa meet in your place to baptize that new Beast Z project of yours when done.:tup:

Update Fenders
 

Got the car buttoned up this morning. Will drive :driving: it this week, then remove and paint to color match the car.. Hoping the fender cracks before paint if its going too. Here are some pics of the fenders on. This is nothing new for the forum, just another set of vented fenders that fit like A_ S!

Enjoy...:tup: Visit my album for more pics.. Rep if you like!!! Thanks

Nissan 370Z Forum - Nut_N_Much's Album: Fenders


http://www.the370z.com/members/nut_n...1-img-0662.jpg

http://www.the370z.com/members/nut_n...2-img-0658.jpg

Shifting gears to Super Charger
 

Just got my Dyno Time Scheduled for Next Saturday. Looks like I can start the install this week.. Can't wait.. Still waiting on gauges, and trying to figure out were the trans cooler lines go. Everything should be gtg.

I talked to the tuner about line pressures, there is a guy on this forum that used him to data log and dial in the line pressures. He has had no issues since. I saw him do 15 pulls on Kellys car to get his dialed in so I am comfortable using him. Hate the shop but the tuner is the best in South Florida and doesn't want his name associated with a bad tune.

So another project, then we will get back to learning how to Carbon Fiber everything on & in the car :tiphat:.

Wow nice work with the cog's and the impeller cant wait to see the results:tup:

Okay, I am going to take a ton of pictures and log the hole install in a DIY. KellyFields sent me this link today http://www.the370z.com/diy-section-d...tructions.html wortmeister did an awesome job and re-wrote the Stillen Instructions to account or issue he worked though during his install.

This is were I'm at right now. COGs on, Impeller in, Intake painted K51 to match the car, just doesn't look dark enough.
http://www.the370z.com/members/nut_n...5-img-0686.jpg
http://www.the370z.com/members/nut_n...7-img-0689.jpg

Using this to make a brace that keeps the mounting plate from flexing.. I call it the Osiris Design. Once I get it aligned I'll mark the pulley and mill it down at the machine shop to make some clearance between the fender and the face of the pulley.http://www.the370z.com/members/nut_n...9-img-0684.jpghttp://www.the370z.com/members/nut_n...6-img-0687.jpg



:yum:

Thanks, and I appreciate the help.. I can't wait for the results either. :happydance:

Car Show Tampa: Was able to drive the Redline Designs 350z to the show in support of our troops. Pretty awesome car..

KellyeFields and a friend of ours; Hando with his Red Z. Hando had tha camera from hell so there will be more pictures to post later.


:tiphat:

That blonde second in on the left and the brown haired lady on the right will do, thanks! You can send them over if your done.

I wouldn't give you seconds bro, I'll send them now, I'll take the rest..:bowrofl:

http://www.the370z.com/members/nut_n...1355098621.jpg

http://www.the370z.com/members/nut_n...1355098621.jpg

http://www.the370z.com/members/nut_n...1355098621.jpg

http://www.the370z.com/members/nut_n...1355098668.jpg

I was just digging thru one of our camera memory cards and found the video you recorded while we were doing the Coilover install. That is awesome, I completely forgot about it. Fun day and a nice memory thanks!

Ya, I forgot about it to. Hopefully I wasn't to bad. Your Dad was there so I think I was well mannered:tup:.

Sophie is getting surgery. I got hit in the rear 2 Fridays ago and got hit in the driver side last week by an A$$hole speeding in a parking lot.

I should see Sophie in 2 or 3 weeks. On a good note I have all my stuff finally to install the SC. Not more waiting, gonna do it when Sophie comes back to me!!!:tiphat:

Sucks about the damage. At least you're getting things fixed.

I'm looking forward to the SC install. Should be cool :tup:

Sucks man but its getting fixed!!! Pics when the SC is done.

Thanks fellas, I was scared it would be a total loss, but USAA will fix it.

Just bumed out. The rental is slow and handles like sh!t..:shakes head:

Finally got my photos of the car.. I talked to the painter he said they would have it painted by Wed. Also talked him into painting the door handles to match the car. :tiphat:

http://www.the370z.com/members/nut_n...5-img-0882.jpg
http://www.the370z.com/members/nut_n...4-img-0870.jpg
http://www.the370z.com/members/nut_n...6-img-0886.jpg
http://www.the370z.com/members/nut_n...7-img-0888.jpg

The new skin welded on, looking better..

http://www.the370z.com/members/nut_n...9-img-0890.jpg
http://www.the370z.com/members/nut_n...8-img-0889.jpg

Will get new head liner, new driver seat, new interior panels front and rear. Should have the new car smell!!!

Ouch! Looking better though. :tup:

:mad: I hate to see this bro.

I no exactly how you feel when my car was in the shop :(

Thanks,
Only thing that really sucks is the rental car. I drive the Z everywhere, every day. Transitioning to a lesser performing car is killing me.. I'll get over it.:driving:

Stillen
 

Finally got the boost pulley ordered after signing a waiver with stillen. $179.00 for a piece of aluminum, damn that hurts..

Also got my Ti Heat Wrap and my new 1 gallon coolant reservoir to replace the plastic on in the engine compartment. Almost there. :happydance:

:pics:

Heya, i got these air straightners on the way....you may want to wait before you put everything in to see how they pan out on my car.

What kinda coolant reservior did u get man?

Not to thread jack, but are these just for FI?


Sent from my iPizzle using magic and new-fangled science stuff

no, for sporadic MAF readings.

This is what stillen gives you.. Small plastic and mounted in the engine compartment with the engine heat..

http://www.the370z.com/members/nut_n...harger-450.jpg

I am playing around with mounting this larger reservoir in the Trunk next to the rear vent. It has more water, also I'm able to run hard lines which will help with heat dissipation.

http://www.the370z.com/members/nut_n...2456-14410.jpg

I was reading about that today, will they go into the K&N or sit in front of the MAF. Man thats close its a 1 1/2 inch from the edge of the intake to the side of the MAF.

Can't wait to see how it turns out..

Ya, just for Stillen Intake for the SC kit. Osirus is working on a fluctuation issue on his MAF readings. http://www.the370z.com/forced-induct...reports-4.html

the two i ordered are 3/4 inch thick, so, should have space left over. And yea, they will sit in front of the MAF at the edge of the inlet.

My last piece of the super charger puzzle !!!

:vuvuzela:

finally wotwot

!!!!!!!!!!!!!!!!! After shes tuned the three of us need to hit the streets!

Yes sir, I will be the fasted 370z on MacDill Air Force Base. 0 to 25 mph in .5 seconds :owned: ..


:stirthepot:

Great build. Is the super charger finally finished and tuned?