Wiggins3377's 40th Anniversary Z

Wiggins3377 · 10-16-2015, 08:37 AM

And one more of a potential look for 2016 Amuse x Aimgain x Advan Racing
ImageUploadedByTapatalk1445002670.870436.jpg

Sent from my iPhone using Tapatalk

Wiggins3377 · 05-07-2016, 09:34 PM

I took a look back at my build thread today and realized it's been almost 7 months since I've updated it, I guess I do a lot more posting on Instagram and Facebook since its so much easier. Regardless this is going be one long winded posts to get everyone up to date on my build. I also want to apologize in advance for grammatical errors

I'm writing this whole thing on my iPhone and I hate auto correct...

Since the last time I posted a lot has happened and is happening with my car. Near the end of 2015 was honored to work with RavSpec, Mackin Industries, Brembo/ Race Technologies, Toyo Tires, Bride and many more to turn my Z into a Sema showcase vehicle. Although the changes made to my car were visual in nature, a lot of time and effort went into getting it ready and the experience was one I will not forget. Here are a few pics from that build and from Sema. Big changes included an authentic Amuse body kit, APR GTC 500 wing, Brembo GT BBK, Advan GT Premium wheels, Toyo R888 tires and Bride Euroster seats.

When my car returned I took a little break from it until I stumbled upon a used Boosted Performance kit. By mid December I was in complete 2016 build mode. Although it's not needed for installation I decided to pull my motor. I did this multiple reasons, one being I wanted to "challenge" myself. I've never done something like this with any of my previous cars and I wanted to give it a go, two I wanted to do a full out engine harness extension and tuck. To do this I figured it would be easiest to start from the motor back and with the motor out I'll have plenty of room to work with. Here are some pull progress pics. I decided to lift the motor out instead of drop it like many have done. With the entire front end of the car off it was pretty easy to do.

With the motor pulled and on a stand my minded started to race with all kinds of ideas. My car has always been geared towards low, slow and show (although that's about to change). I can't say that philosophy didn't play into my decision to delete the brake and battery compartments and do a full out shave. I for one can't weld, so I scheduled some time with a local shop to get it all done as well as a few other items I'll discuss later. The battery will be relocated to the hatch and the various fuss boxes will be relocated under the dash with access from the glove box. On the brake side ABS will be deleted and the brake hardline will be (mostly) tucked away. The AC will also be completely deleted, with the option to add it back should I hate that decision. Pics off their progress will also be posted a little later. I also pulled various pieces from the motor, including timing belt covers, etc and had them powdercoated and will be receiving a lot of purple Samco Sport hoses in the next week or so to do a complete motor and turbo kit hose and coupler swap.

Before the car was towed away for said work to be started I finally, after 6.5 months of waiting, received my Aimgain International widebody kit. I've got to admit when waiting for the kit I went through several phases of like and dislike with it. At first I love everything about it, then I saw it in person and well... I was less than pleased with it. Soon after I decided the rear bumper wasn't for me, no way no how. Then it was the front overfenders, they just don't flow with the car, they are too wide (in my opinion) and they should have followed the curves of the OEM body through headlights, or around in the case of the overfenders, and all the way through the front bumper. Check out the Rocket Bunny or Aimgain Mazda MX-5 to see what I'm referencing. Regardless I wasn't going to use them. Then it was the front bumper. To be honest I loved it and continue to love it, but at the end of the day I decided I was going to do something completely custom and hopefully unique. Here's a render.

and here's an early mock-up.

What you're seeing is authentic Amuse front and rear bumpers, Aimgain rear overfenders, Carbon Signal v2 extended vent front fenders, a custom chassis mount APR GTC 500 wing and hopefully a matching set of custom APR front splitters and side blades. I'm sure a lot of people are wondering why wide in the back and not the front. Fear not the Carbon Signal fenders will be widened about 1" and with the aggressive look of the v2 fenders it'll all flow nicely.

About the same time I sold my Bride Eurosters from Sema and placed a new order with RavSpec for the same seat in Dark Charcoal Grey. These seats are by far the most comfortable aftermarket seat I've ever sat in. They arrived to me in 2 months time.

I also purchased a set of 19" Work Meister M13P wheels with bronze barrels, bronze faces and gold hardware from RavSpec. Specs are 19x10-7 and 19x13-25. They will be wrapped in Toyo T1 Sport tires. 245/35/19 325/30/19. If the 2-3 month wait time holds true I should have them in June.

With my car at the local shop a laundry list of items have been started and will be complete in the next few days.

A new front bash bar (since the OEM has to be removed with the BP Kit). It'll be powdercoated Burgandy Grape with provisions for the BP Intercooler and Top Secret tow hook. It also have "fangs" which will peak through the Amuse front bumper. Something I missed from the OEM bumper.

A new rear bash bar, again powdercoated burgandy grape with a provision for the APR GTC500 chassis mount wing as well as tapped holes for a license plate, since the amuse bumper doesn't have any.

Mock-up of said chassis mount wing. It'll swing back for hatch access. Cut outs coming.

V2 of my front cage, this time through the dash so I can access the glove box and fuse boxes inside. Again burgandy grape.

Fender cut and reweld for overfenders.

Engine bay compartment delete and shave

And finally a new set of intake mani to IC charge pipes. 2.75" all the way through. Sorry no pics of these.

Additional items going into this build are the Carbon Signal Zedatech dash management kit, Tomei TiExtreme exhaust, Amuse titanium lugs, Top Secret titanium tow hook, Top Secret Aero Catch pins, Top Secret rear fog light CSF radiator and TiBrurnt titanium dress up kit and overfender hardware.

Up next, paint, extended the OEM wire harness and tuck. Then install the motor and turbo kit and schedule a tune. If I'm lucky she'll be on the road in July. I'll keep this thing updated.

Sent from my iPhone using Tapatalk

370Z JT · 05-07-2016, 10:24 PM

you got too much money.....uggghhh

kukpet · 05-08-2016, 09:33 AM

cigarclifford · 05-08-2016, 10:41 AM

Outstanding build Mr Wiggins

A few members here on the forum will be attending the 2016 SEMA trade show
in Las Vegas

We will look for you Sir in the winners circle

-Clifford

Wiggins3377 · 05-08-2016, 10:43 AM

Quote:

Originally Posted by cigarclifford

Outstanding build Mr Wiggins

A few members here on the forum will be attending the 2016 SEMA trade show

in Las Vegas

We will look for you Sir in the winners circle

-Clifford

I was there last year... In hoping to go again this year

Wiggins3377 · 05-11-2016, 06:36 PM

Dropped by the shop today to trace the front bumper for a new splitter and the cage is in and dash is back on.

Sent from my iPhone using Tapatalk

Hotrodz · 05-11-2016, 06:46 PM

Is this build going to be for full-time track car or you going to wear a helmet when you drive it on public roads lol.

Sent from my SM-N910P using Tapatalk

Wiggins3377 · 05-12-2016, 07:18 AM

Quote:

Originally Posted by Hotrodz

Is this build going to be for full-time track car or you going to wear a helmet when you drive it on public roads lol.

Sent from my SM-N910P using Tapatalk

Rec use only

birdman71 · 05-12-2016, 05:42 PM

Quote:

Originally Posted by Hotrodz

Is this build going to be for full-time track car or you going to wear a helmet when you drive it on public roads lol.

Sent from my SM-N910P using Tapatalk

Quote:

Originally Posted by Wiggins3377

Rec use only

Rec use only.. with a helmet! Gotta powder coat it Burgundy Grape and slap a top secret tint visor on that biotch

onesho · 05-14-2016, 08:51 PM

Anyhting left

Wiggins3377 · 05-16-2016, 08:14 PM

Considering a paint color change to Porsche Sports Classic Grey... I would hate to get rid of the 40th Anniversary Grey though.

Sent from my iPhone using Tapatalk

BeemaaZ · 05-16-2016, 08:48 PM

I think it's about time for you to get another car Steve.

Obviously money is not an object here.

I would get a GT3 if I were you.

Meulen · 05-17-2016, 09:46 AM

Quote:

Originally Posted by Wiggins3377

Considering a paint color change to Porsche Sports Classic Grey... I would hate to get rid of the 40th Anniversary Grey though.

Sent from my iPhone using Tapatalk

don't do it!!!!

Wiggins3377 · 05-17-2016, 12:50 PM

Quote:

Originally Posted by Meulen

don't do it!!!!

I know. Makes me wish I had any other OEM z color. If I did I wouldn't even be thinking twice about it.

10-16-2015, 08:37 AM	#721 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 76	And one more of a potential look for 2016 Amuse x Aimgain x Advan Racing ImageUploadedByTapatalk1445002670.870436.jpg Sent from my iPhone using Tapatalk LMBmikeZ, GaleForce, speedfreek and 1 others like this. __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

05-07-2016, 09:34 PM	#722 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 76	Wiggins3377's 40th Anniversary Z I took a look back at my build thread today and realized it's been almost 7 months since I've updated it, I guess I do a lot more posting on Instagram and Facebook since its so much easier. Regardless this is going be one long winded posts to get everyone up to date on my build. I also want to apologize in advance for grammatical errors I'm writing this whole thing on my iPhone and I hate auto correct... Since the last time I posted a lot has happened and is happening with my car. Near the end of 2015 was honored to work with RavSpec, Mackin Industries, Brembo/ Race Technologies, Toyo Tires, Bride and many more to turn my Z into a Sema showcase vehicle. Although the changes made to my car were visual in nature, a lot of time and effort went into getting it ready and the experience was one I will not forget. Here are a few pics from that build and from Sema. Big changes included an authentic Amuse body kit, APR GTC 500 wing, Brembo GT BBK, Advan GT Premium wheels, Toyo R888 tires and Bride Euroster seats. When my car returned I took a little break from it until I stumbled upon a used Boosted Performance kit. By mid December I was in complete 2016 build mode. Although it's not needed for installation I decided to pull my motor. I did this multiple reasons, one being I wanted to "challenge" myself. I've never done something like this with any of my previous cars and I wanted to give it a go, two I wanted to do a full out engine harness extension and tuck. To do this I figured it would be easiest to start from the motor back and with the motor out I'll have plenty of room to work with. Here are some pull progress pics. I decided to lift the motor out instead of drop it like many have done. With the entire front end of the car off it was pretty easy to do. With the motor pulled and on a stand my minded started to race with all kinds of ideas. My car has always been geared towards low, slow and show (although that's about to change). I can't say that philosophy didn't play into my decision to delete the brake and battery compartments and do a full out shave. I for one can't weld, so I scheduled some time with a local shop to get it all done as well as a few other items I'll discuss later. The battery will be relocated to the hatch and the various fuss boxes will be relocated under the dash with access from the glove box. On the brake side ABS will be deleted and the brake hardline will be (mostly) tucked away. The AC will also be completely deleted, with the option to add it back should I hate that decision. Pics off their progress will also be posted a little later. I also pulled various pieces from the motor, including timing belt covers, etc and had them powdercoated and will be receiving a lot of purple Samco Sport hoses in the next week or so to do a complete motor and turbo kit hose and coupler swap. Before the car was towed away for said work to be started I finally, after 6.5 months of waiting, received my Aimgain International widebody kit. I've got to admit when waiting for the kit I went through several phases of like and dislike with it. At first I love everything about it, then I saw it in person and well... I was less than pleased with it. Soon after I decided the rear bumper wasn't for me, no way no how. Then it was the front overfenders, they just don't flow with the car, they are too wide (in my opinion) and they should have followed the curves of the OEM body through headlights, or around in the case of the overfenders, and all the way through the front bumper. Check out the Rocket Bunny or Aimgain Mazda MX-5 to see what I'm referencing. Regardless I wasn't going to use them. Then it was the front bumper. To be honest I loved it and continue to love it, but at the end of the day I decided I was going to do something completely custom and hopefully unique. Here's a render. and here's an early mock-up. What you're seeing is authentic Amuse front and rear bumpers, Aimgain rear overfenders, Carbon Signal v2 extended vent front fenders, a custom chassis mount APR GTC 500 wing and hopefully a matching set of custom APR front splitters and side blades. I'm sure a lot of people are wondering why wide in the back and not the front. Fear not the Carbon Signal fenders will be widened about 1" and with the aggressive look of the v2 fenders it'll all flow nicely. About the same time I sold my Bride Eurosters from Sema and placed a new order with RavSpec for the same seat in Dark Charcoal Grey. These seats are by far the most comfortable aftermarket seat I've ever sat in. They arrived to me in 2 months time. I also purchased a set of 19" Work Meister M13P wheels with bronze barrels, bronze faces and gold hardware from RavSpec. Specs are 19x10-7 and 19x13-25. They will be wrapped in Toyo T1 Sport tires. 245/35/19 325/30/19. If the 2-3 month wait time holds true I should have them in June. With my car at the local shop a laundry list of items have been started and will be complete in the next few days. A new front bash bar (since the OEM has to be removed with the BP Kit). It'll be powdercoated Burgandy Grape with provisions for the BP Intercooler and Top Secret tow hook. It also have "fangs" which will peak through the Amuse front bumper. Something I missed from the OEM bumper. A new rear bash bar, again powdercoated burgandy grape with a provision for the APR GTC500 chassis mount wing as well as tapped holes for a license plate, since the amuse bumper doesn't have any. Mock-up of said chassis mount wing. It'll swing back for hatch access. Cut outs coming. V2 of my front cage, this time through the dash so I can access the glove box and fuse boxes inside. Again burgandy grape. Fender cut and reweld for overfenders. Engine bay compartment delete and shave And finally a new set of intake mani to IC charge pipes. 2.75" all the way through. Sorry no pics of these. Additional items going into this build are the Carbon Signal Zedatech dash management kit, Tomei TiExtreme exhaust, Amuse titanium lugs, Top Secret titanium tow hook, Top Secret Aero Catch pins, Top Secret rear fog light CSF radiator and TiBrurnt titanium dress up kit and overfender hardware. Up next, paint, extended the OEM wire harness and tuck. Then install the motor and turbo kit and schedule a tune. If I'm lucky she'll be on the road in July. I'll keep this thing updated. Sent from my iPhone using Tapatalk 370Z JT, LMBmikeZ, CarbonSignal and 7 others like this. __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work Last edited by Wiggins3377; 05-09-2016 at 02:50 PM.

05-07-2016, 10:24 PM	#723 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	you got too much money.....uggghhh LMBmikeZ and Wiggins3377 like this. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

05-08-2016, 09:33 AM	#724 (permalink)
kukpet Base Member Join Date: Oct 2012 Location: Indianapolis, IN Posts: 216 Drives: 10 NISMO Rep Power: 107	Wiggins3377 likes this.

05-08-2016, 10:41 AM	#725 (permalink)
cigarclifford A True Z Fanatic Join Date: Apr 2013 Location: Cali State Hospital Posts: 13,351 Drives: 2017 Corvette Z06 Rep Power: 458713	Outstanding build Mr Wiggins A few members here on the forum will be attending the 2016 SEMA trade show in Las Vegas We will look for you Sir in the winners circle -Clifford Wiggins3377 likes this. __________________ -Clifford

05-11-2016, 06:36 PM	#727 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 76	Dropped by the shop today to trace the front bumper for a new splitter and the cage is in and dash is back on. Sent from my iPhone using Tapatalk LMBmikeZ, CarbonSignal, Hotrodz and 2 others like this. __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

05-11-2016, 06:46 PM	#728 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	Is this build going to be for full-time track car or you going to wear a helmet when you drive it on public roads lol. Sent from my SM-N910P using Tapatalk Wiggins3377 likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

05-14-2016, 08:51 PM	#731 (permalink)
onesho Base Member Join Date: Nov 2014 Location: ventura Posts: 172 Drives: 2013 370z Rep Power: 10	Anyhting left

05-16-2016, 08:14 PM	#732 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 76	Considering a paint color change to Porsche Sports Classic Grey... I would hate to get rid of the 40th Anniversary Grey though. Sent from my iPhone using Tapatalk GaleForce likes this. __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

05-16-2016, 08:48 PM	#733 (permalink)
BeemaaZ A True Z Fanatic Join Date: Sep 2011 Location: Irvine, CA Posts: 2,594 Drives: 40thAE#472 Rep Power: 507	I think it's about time for you to get another car Steve. Obviously money is not an object here. I would get a GT3 if I were you. Wiggins3377 and edzilla123 like this. __________________ SoCal 40th Meet Old & New Mods Steering Lock RECALL**** Own 40th 370Z? Get the build # and the Manuf. date here

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z For Sale 40TH anniversary like new	kingair76	370Z For Sale	4	03-28-2013 06:51 PM
WTB 40th Anniversary	dpmdc	40th Anniversary 370Z	16	05-15-2012 07:36 AM
L.A. 40th Anniversary	ICENINE	40th Anniversary 370Z	9	02-08-2012 11:02 PM
40th Anniversary Z for $33K?	Samich	Nissan 370Z General Discussions	14	08-09-2011 09:01 AM
40th Anniversary	370z4ME	40th Anniversary 370Z	4	02-01-2011 07:54 AM