MY car so far

Bigviet23 · 01-13-2013, 10:46 PM

Quote:

Originally Posted by KevinN

where did you get that black grommet for your shift knob

The grommet is from my old nismo shift knob

Bigviet23 · 01-13-2013, 10:47 PM

Quote:

Originally Posted by nmjaxx9

dam I thought 30 in the back would have more of a poke.

Normally they would but the offsets on these are +35

nmjaxx9 · 01-13-2013, 10:56 PM

Quote:

Originally Posted by Bigviet23

Normally they would but the offsets on these are +35

ahh ic

black-370z · 01-14-2013, 09:07 AM

Did you use the oven when you did your lights or a heat gun?
And sweet looking car!

Bigviet23 · 01-14-2013, 09:28 AM

Quote:

Originally Posted by black-370z

Did you use the oven when you did your lights or a heat gun?
And sweet looking car!

I baked them in the oven. Worked out really well.
Thanks

UnReal · 01-19-2013, 08:51 PM

Quote:

Originally Posted by tibal

Looking great! Definitely looks professionally done, especially the rear!

Have to agree! Where did you get that?

Bigviet23 · 01-19-2013, 09:54 PM

Quote:

Originally Posted by UnReal

Have to agree! Where did you get that?

My buddy did it for me and thanks

LiquidCrewZ · 01-21-2013, 10:38 AM

Quote:

Originally Posted by Bigviet23

They're 20mm all the way around.

The post you had with the stock wheels I exactly the look I'm going for. But, did you need to buy longer lug bolts?

Bigviet23 · 01-21-2013, 11:39 AM

Quote:

Originally Posted by LiquidCrewZ

The post you had with the stock wheels I exactly the look I'm going for. But, did you need to buy longer lug bolts?

I was using the spacers that had the bolts attached to them. They worked well. B2autodesign spacers are what I used and they work great

Bigviet23 · 01-21-2013, 07:02 PM

image.jpg
Laid down some vinyl on my interior. Tried to do the metra kit too but it was too hard to get around all the circles.

Bigviet23 · 01-28-2013, 05:17 PM

Fairlady Z badge
image.jpg

BRN370z · 01-30-2013, 06:34 AM

im about to install "TEIN S.Tech Springs" and they give 0.9 drop in the front.. and installing 20mm Ichiba V1 spacers, so do you think it will rub or i'll have any issues??

Bigviet23 · 01-30-2013, 11:47 AM

Quote:

Originally Posted by BRN370z

im about to install "TEIN S.Tech Springs" and they give 0.9 drop in the front.. and installing 20mm Ichiba V1 spacers, so do you think it will rub or i'll have any issues??

Tien springs are notorius for dropping the car lower then what is said. I think people have gotten over an inch drop on them. But you should be fine on your set up unless your offsets are crazy low

AlexRaymond19 · 02-19-2013, 11:32 AM

You should plasti dip your fengs! I think it would look mean! Good job so far

Pabroa2345 · 02-19-2013, 02:25 PM

nice looking roof! is that carbon fiber wrap and how much was it im located here in houston

01-14-2013, 09:07 AM	#49 (permalink)
black-370z Base Member Join Date: Jan 2013 Location: Corpus Christi, Tx Posts: 18 Drives: 2010 370z base 7AT Rep Power: 12	Did you use the oven when you did your lights or a heat gun? And sweet looking car! __________________ 2010 370z base, 7AT, magnetic black. \|lowered \| 19" Varrstoen Es2's \| Z1 MAF tubes \| K&N Drop In's \| Custom CBE with Borla XR-1's \| Beluga Racing Test Pipes \| Sony Touchscreen \| Plastidipped \|

01-21-2013, 07:02 PM	#55 (permalink)
Bigviet23 Base Member Join Date: Dec 2011 Location: Dallas (Allen now) Posts: 237 Drives: 2009 MB manual Rep Power: 13	image.jpg Laid down some vinyl on my interior. Tried to do the metra kit too but it was too hard to get around all the circles. __________________ My slow build http://www.the370z.com/members-370z-...ar-so-far.html

01-28-2013, 05:17 PM	#56 (permalink)
Bigviet23 Base Member Join Date: Dec 2011 Location: Dallas (Allen now) Posts: 237 Drives: 2009 MB manual Rep Power: 13	Fairlady Z badge image.jpg __________________ My slow build http://www.the370z.com/members-370z-...ar-so-far.html

02-19-2013, 11:32 AM	#59 (permalink)
AlexRaymond19 Track Member Join Date: Jun 2011 Location: Maine Posts: 771 Drives: 2010 Nissan 370z Rep Power: 14	You should plasti dip your fengs! I think it would look mean! Good job so far __________________ 2010 370Z Touring MT \| Stillen \| Motordyne \| Momentum\| Z1 \| Fast Intentions \| Advant Garde \| RE11 \| Swift \| SPC \| Quaife \| Whiteline \| Evo R \| 322RWHP 259ft-lb Mustang

02-19-2013, 02:25 PM	#60 (permalink)
Pabroa2345 Base Member Join Date: Jan 2012 Location: Houston Posts: 4 Drives: 2009 370z silver Rep Power: 13	roof nice looking roof! is that carbon fiber wrap and how much was it im located here in houston

01-30-2013, 06:34 AM	#57 (permalink)
BRN370z Base Member Join Date: Aug 2010 Location: Bahrain Posts: 21 Drives: '11 370z Quartz A/T Rep Power: 14	im about to install "TEIN S.Tech Springs" and they give 0.9 drop in the front.. and installing 20mm Ichiba V1 spacers, so do you think it will rub or i'll have any issues??