Reminds me of this particular car

Attachment 128106


Attachment 128107



The C7R rear Diff cooler

That's diff cooler and tranny cooler.

Finished installing my side hood vents. :D

Berry nice Rusty. Good job.

Thank you. :tiphat:

State inspection is done.

Alignment is done. Specs are. Front camber -2.2, caster +6.2, toe 1/16" in. Rear camber -1.8, toe 1/16" in.

The Z is a bit on the dartie side. Couldn't push to hard because it's only 40F with wind gusts to 50 mph.

New gauges work. Seen oil pressure as high as 110 at 5,000 rpm. Water temp was 180F with the new hood vents. Diff temp went to 200F. Turned on the pump and watched the temps drop. Turned the fan on and the temps dropped even quicker.

The OS Giken diff is a bit clunky in operation at low speed. You know it's working.

Felt so good driving the Z again! :driving:

Pic's of the finished diff cooler install.

Glad to hear you are back on the road again.:driving:

Rusty, the diff cooler and hood vents look sweet :tup:
Can you close the vents if its raining?

no, they do not close.

Like he said. No. you have to cover them with something if you want.

I have been surprised, the shed water pretty good. In a mild rain I had no water get into the engine bay.

Hey Rusty,
Am I gonna see you next week?


Sent from my iPhone using Tapatalk

Glad you are going to be there, I look forward to seeing you!:tiphat:

Yep, Ill be at ZDayZ. :tup:

We are having a get together at cabin 660 on Thursday at 6pm. :tup:

Here's a link to it.

http://www.the370z.com/nissan-370z-g...2018-a-19.html

Couple of pictures from 129slayer. :tup: