Nissan 370Z Forum
Page 49 of 78 « First 394748 49 505159 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Member's 370Z Gallery (http://www.the370z.com/members-370z-gallery/)
-   -   Rusty's Nismo Journal (http://www.the370z.com/members-370z-gallery/48353-rustys-nismo-journal.html)

JLarson 09-21-2017 10:01 AM
Really enjoyed this journal, and the creativity here. Good stuff man! The DIY fabrication is awesome.

Kingbaby 09-21-2017 11:11 AM
Speedy recovery Champ !

Rusty 09-21-2017 01:58 PM
Quote:
Originally Posted by Spooler (Post 3694878)
Someone is going stir crazy....
You know it. :eek::icon14::rofl2:
I put brake pads and rotors on the wife's Grand Cherokee, and a belt and 2 idler pulleys on my Power Wagon this week. :icon14: Doing everything one handed sucks donkey balls. :shakes head:

JLarson 09-21-2017 02:44 PM
Quote:
Originally Posted by Rusty (Post 3694952)
You know it. :eek::icon14::rofl2:
I put brake pads and rotors on the wife's Grand Cherokee, and a belt and 2 idler pulleys on my Power Wagon this week. :icon14: Doing everything one handed sucks donkey balls. :shakes head:
You should be used to it by now with the way you browse the internet late at night... your donkey show websites and such :ugh2:

sx moneypit 09-21-2017 03:29 PM
Quote:
Originally Posted by JLarson (Post 3694963)
You should be used to it by now with the way you browse the internet late at night... your donkey show websites and such :ugh2:
:icon17:

Rusty 09-21-2017 04:32 PM
Quote:
Originally Posted by JLarson (Post 3694963)
You should be used to it by now with the way you browse the internet late at night... your donkey show websites and such :ugh2:
You seeing something that I shouldn't be looking at? :eek: Because I'm in bed around 1 to 2 am.

Rusty 09-22-2017 08:47 PM
1 Attachment(s)
Got some more work done today.
Got the bearings pressed on the OS Giken LSD carrier. :tup:

Rusty 09-22-2017 08:57 PM
6 Attachment(s)
Ran the oil pressure and water temp wiring from under the hood to the inside of the cabin.
1st, 2nd, and 3rd pic's. The hole I drilled out, then enlarged to 3/4" diameter.
4th pic. Rubber gromet and the wiring running through.
5th pic. Used clothes hanger to push wiring through the main wiring boot.
6th pic. Wiring through the main wiring boot. When I'm done wiring. I'l put some RTV over the slit that the wiring goes through to seal it.

Rusty 09-22-2017 09:04 PM
2 Attachment(s)
Remove the cubby hole for gauge install.
2nd pic shows how I will have the gauges layout. Across the top. Oil Pressure on the left and Water Temp on the right. Below the Water Temp will be the Diff Temp. To the left of the Diff Temp and below the Oil Pressure will be the switches to the diff oil pump, diff fan, YAW sensor, and dimmer for the gauge lights.

jchammond 09-23-2017 04:00 AM
Quote:
Originally Posted by Rusty (Post 3695374)
Got some more work done today.
Got the bearings pressed on the OS Giken LSD carrier. :tup:
That's a sealed up looking unit; are the clutches,etc...all internal?

God-Speed 09-23-2017 06:52 AM
Nice work!!!:tup:

Rusty 09-23-2017 11:50 AM
Quote:
Originally Posted by jchammond (Post 3695411)
That's a sealed up looking unit; are the clutches,etc...all internal?
Everything is internal. Put the ring gear on and install it.

cigarclifford 09-23-2017 05:38 PM
Outstanding progress Mr. Rusty :tup:

Rusty 09-26-2017 07:32 PM
5 Attachment(s)
Got some more work done on the gauges.

Rusty 09-26-2017 07:33 PM
4 Attachment(s)
More pic's.


All times are GMT -5. The time now is 10:47 AM.
Page 49 of 78 « First 394748 49 505159 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2