![]() |
Great looking car!
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
|
#2 (permalink) |
|
RIP Tony :( (1969-2015)
![]() Join Date: Feb 2009
Location: Northern Virginia
Posts: 18,802
Drives: '14 Mustang GT/CS
Rep Power: 69 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
I've had a few people ask about the rear valence (or diffuser as some like to call it) so here are some photos. This is an overlay, however to install this piece you will need to drill holes in your bumper.
Looking from above down by the rear fog light: ![]() Looking from above down by the drivers side exhaust pipe: ![]() Looking down at the driver & passenger sides: ![]() ![]() ![]() Angles of the screws and holes drilled into my bumper during install: ![]() ![]() ![]() ![]() ![]() Note that the screws were supplied by the autobody shop. The ones that came with the overlay were not long enough to use. Not saying this would be the case for everyone but in my particular case it was. An easy problem to resolve...so not a real big deal. And yes, I am aware of the slight gap that is visible in the photos. I did have another member tell me that this is not the first time the space is visible after installing this particular valence.
__________________
![]() SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips
Last edited by 2theextreme; 04-15-2010 at 10:15 PM. |
|
|
|
|
#3 (permalink) |
|
I shake Caravans
![]() Join Date: Apr 2009
Location: north Dallas
Posts: 9,517
Drives: everyone crazy
Rep Power: 44 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Tony, hate to say it man, but that doesn't look like it is fitting correctly. The edge should follow the groove in the bumper all the way across. Basically, the edge should sit inside that groove.
__________________
____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole. |
|
|
|
|
#4 (permalink) | |
|
RIP Tony :( (1969-2015)
![]() Join Date: Feb 2009
Location: Northern Virginia
Posts: 18,802
Drives: '14 Mustang GT/CS
Rep Power: 69 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
But if you look at the section that's covering the fog light it's perfect.....not much more can be done. CF can't be stretched...which is what looks like is needed with this one. I'm a little disappointed but from straight on it looks good. I may contact EVO-R and have them look at the photos. At least see what they say.
__________________
![]() SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips
|
|
|
|
|
|
#5 (permalink) | |
|
I shake Caravans
![]() Join Date: Apr 2009
Location: north Dallas
Posts: 9,517
Drives: everyone crazy
Rep Power: 44 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
__________________
____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole. |
|
|
|
|
|
#6 (permalink) | |
|
RIP Tony :( (1969-2015)
![]() Join Date: Feb 2009
Location: Northern Virginia
Posts: 18,802
Drives: '14 Mustang GT/CS
Rep Power: 69 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
Yeah, I'm guessing it's a mold issue. Even the front part that covers the fangs sometimes needs to be shaved down because the lower lip makes it hard to slide the overlay on. I got lucky and my front CF parts worked well. Again, I'm not too worried. Who knows....maybe I'll get a Version 2 or something!
__________________
![]() SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips
|
|
|
|
|
|
#8 (permalink) |
|
RIP Tony :( (1969-2015)
![]() Join Date: Feb 2009
Location: Northern Virginia
Posts: 18,802
Drives: '14 Mustang GT/CS
Rep Power: 69 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Yeah man....hurry up!
__________________
![]() SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips
|
|
|
|
|
#10 (permalink) |
|
RIP Tony :( (1969-2015)
![]() Join Date: Feb 2009
Location: Northern Virginia
Posts: 18,802
Drives: '14 Mustang GT/CS
Rep Power: 69 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
__________________
![]() SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips
|
|
|
|
|
#12 (permalink) | |
|
RIP Tony :( (1969-2015)
![]() Join Date: Feb 2009
Location: Northern Virginia
Posts: 18,802
Drives: '14 Mustang GT/CS
Rep Power: 69 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
They have a new shop which looks pretty amazing! They will be having an Open House/Grand Opening party on 15 May! I'm def looking forward to that.....hopefully you can make it, too!
__________________
![]() SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips
|
|
|
|
|
|
#13 (permalink) |
|
Enthusiast Member
Join Date: Jun 2009
Location: Virginia
Posts: 356
Drives: '14 GTR Premium
Rep Power: 18 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Yeah wish I could but going out for a short deployment on may 1st.... yeah that sucks or else I'd be there, but once again i have to miss out on great opportunities. But duty calls
|
|
|
|
|
#14 (permalink) | |
|
RIP Tony :( (1969-2015)
![]() Join Date: Feb 2009
Location: Northern Virginia
Posts: 18,802
Drives: '14 Mustang GT/CS
Rep Power: 69 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
__________________
![]() SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips
|
|
|
|
|
|
#15 (permalink) |
|
RIP Tony :( (1969-2015)
![]() Join Date: Feb 2009
Location: Northern Virginia
Posts: 18,802
Drives: '14 Mustang GT/CS
Rep Power: 69 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Some awesome photos taken from a great meet....
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
![]() SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips
|
|
|
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Official Chicane Yellow 370Z Thread | xDIEGOx | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 252 | 06-12-2021 06:53 PM |
| Monterey Blue vs. Laguna Seca Blue | smurfblu13 | Nissan 370Z General Discussions | 28 | 05-13-2011 08:56 PM |
| Woot! New 370z YELLOW owner! | rackley | New 370Z Owner | 1 | 04-11-2009 08:48 PM |
| Looking for a fully loaded Chicane Yellow 370Z | JohnnyD | Nissan 370Z Pricing / Ordering Discussions | 5 | 03-31-2009 05:14 PM |
| Yellow 370Z | cstr_Cali | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 7 | 11-08-2008 07:10 PM |