wstar's Journal

wstar · 06-29-2009, 09:22 AM

Quote:

Originally Posted by miguez

To me the interesting result of the routing on the picture you show above is that it allows for suspension travel and wheel turning with plenty to spare, while remaining relatively fixed other than that, given the inherent stability that loop gives the hose. At least that's what it would seem.

I sent the pic to coz@czp, he told me what I did wrong, I just need to fix it today. I'll get some pics of the correct routing (afaik) on the front and rear before I put the wheels back on.

wstar · 06-29-2009, 01:03 PM

Coz got me sorted out on the brake line routing, this is what they look like now:

Rear (sorry, blurry pic):

Three views of the front:

Also, here's the box-o-parts from the OEM stuff that came off. Between all the brackets and fittings that went away and were replaced with the simple braided line, seems like I probably shaved a tiny amount of weight with this too:

I just now stuck the wheels back on the car, haven't even torqued the lug nuts down yet or lowered the car, gotta get some real work done here before I get back to that. I probably won't do any "driving impressions" for a few days, because like I said earlier I didn't order enough speed bleeders, and as a result I'm pretty sure I have air bubbles in the lines, which are going to cause more problems with mushy pedal feel than the braided lines could ever make up for

Once the new bleeders come in later in the week I'll re-bleed again and see how it feels. For now I'm just gonna take it easy and not trust my brakes much.

Josh@STILLEN · 06-29-2009, 02:42 PM

Quote:

Originally Posted by wstar

I sent the pic to coz@czp, he told me what I did wrong, I just need to fix it today. I'll get some pics of the correct routing (afaik) on the front and rear before I put the wheels back on.

Are you sure this is the routing path they specified? I would make sure you can go full lock without tugging those lines hard. It would appear (from the pictures) that if the knuckle was turned fully, it seems short on slack.

On the steel locator bracket, does it appear that over time it will chafe with the stainless line moving, or am I missing something?

wstar · 06-29-2009, 03:03 PM

Quote:

Originally Posted by Josh@STILLEN

Are you sure this is the routing path they specified? I would make sure you can go full lock without tugging those lines hard. It would appear (from the pictures) that if the knuckle was turned fully, it seems short on slack.

On the steel locator bracket, does it appear that over time it will chafe with the stainless line moving, or am I missing something?

I did test the steering travel, the lines don't get stressed. The front suspension was hanging (as in, tires off the ground, and jack stands not on anything suspension related) when I did the steering check, so I assume suspension travel will be ok too, as it will only go up (more slack) from here.

The original steel brackets (the black ones) were removed per CZP. That arm that the front cable is wrapped around now though... yes I am worried about it chafing against the corners of it. The lines are teflon coated, and I'm pulling the wheels back off to rebleed later in the week and not planning to drive many miles between, so we'll see how it looks then. I figure worst case I can pad those corners somehow (like, glue on some soft rubber material there).

When I was scoping around the net for pics of braided line installs I came across your (Stillen) 350Z lines. By eyeballing it they look 370Z applicable, although I don't know if there were any small changes in lengths from the 350Z (you would think not, but who knows). CZP's lines are very different from your kit though. Where yours uses the stock brackets and affixes at multiple points like the stock lines, theirs is just a single braided line with one floating mounting tab on it.

wstar · 06-29-2009, 03:07 PM

Oh maybe I misread what you meant Josh, if you're referring to the little bracket CZP shipped that's in use, I don't think that one will chafe. It holds snug and has soft edges, and there's really not much slippage that's going to happen there anyways, as the side towards the caliper is a straight, stiff, and relatively immobilized section so to speak (there's no suspension movement between the caliper and that bracket).

06-29-2009, 01:03 PM	#2 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3596	Coz got me sorted out on the brake line routing, this is what they look like now: Rear (sorry, blurry pic): Three views of the front: Also, here's the box-o-parts from the OEM stuff that came off. Between all the brackets and fittings that went away and were replaced with the simple braided line, seems like I probably shaved a tiny amount of weight with this too: I just now stuck the wheels back on the car, haven't even torqued the lug nuts down yet or lowered the car, gotta get some real work done here before I get back to that. I probably won't do any "driving impressions" for a few days, because like I said earlier I didn't order enough speed bleeders, and as a result I'm pretty sure I have air bubbles in the lines, which are going to cause more problems with mushy pedal feel than the braided lines could ever make up for Once the new bleeders come in later in the week I'll re-bleed again and see how it feels. For now I'm just gonna take it easy and not trust my brakes much. __________________ 7AT Track Car! Journal thread / Car setup details

06-29-2009, 03:07 PM	#5 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3596	Oh maybe I misread what you meant Josh, if you're referring to the little bracket CZP shipped that's in use, I don't think that one will chafe. It holds snug and has soft edges, and there's really not much slippage that's going to happen there anyways, as the side towards the caliper is a straight, stiff, and relatively immobilized section so to speak (there's no suspension movement between the caliper and that bracket). __________________ 7AT Track Car! Journal thread / Car setup details

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TravisJB Journal	travisjb	Member's 370Z Gallery	1977	11-03-2017 09:39 AM
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 10:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-09-2013 11:55 PM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 05:44 PM
LiquidZ's Journal	LiquidZ	Member's 370Z Gallery	22	05-22-2009 11:42 PM