Mr. G. Brettin's Slow Motion Leg Hump

gbrettin · 04-19-2021, 09:39 AM

Getting to the shop through the week was a bust. I got my 2nd covid shot and that oretty much gave be covid light and I was sick for a couple days.

Saturday was the main day I needed to be there. Met up with Jeff so that we could wrap up the Intake, that happened!. We were going to put BOV but shipping took a while and in true Murphy fashion they showed up at my house after I got back from the shop.

Exhaust flanges are a wrap. vbands are on! there's 1/32 between the flange and the alternator but should double to 1/16 when tightened down. SUPER tight but it works. Now for some bitter sweet up turbo up pipe news. I've opted to go with fender dump exhaust for now due to space and will not be running the Fast Intentions Exhaust. This decision means that additional space is now available and no core support (which was there when I made the up pipes) has yielded space as well. I found two mandrel 45's in the shop and then we tested . Passenger side will need one pie at the exhaust flange while the driver side needs nothing. The clean path will reduce a TON of turbulence which means clean boost. There's also less welds so less chances of breaking from heating and cooling. Exhaust tubing will be far away from my tires now, which means I can change the OE steering knuckles out to voodoo or some other billet brand in the future. Most importantly, I can run wide tires with out worrying about hitting the exhaust.

It's lame to put time/money into something and change... but i've come to accept that it simply needs to happen to achieve better results. Knowledge/Skill has a lot to do with this as well, I simply know more now and the final layout now known too.

Not a lot of pictures because we were getting after it.

After the pipes are completed, I will get them to the coater for Cerakote. Then I will send to a different company for another thermal wrap.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racing in Slow Motion IV	MightyBobo	The Lounge (Off Topic)	4	03-12-2013 08:12 PM
Racing In Slow Motion IV	Robert_K	The Lounge (Off Topic)	1	07-13-2012 11:01 AM
Slow shipping slow response slow everything	thispecialk	Nissan 370Z General Discussions	15	11-01-2010 08:23 PM
Racing in Slow Motion	MightyBobo	The Lounge (Off Topic)	2	12-17-2009 03:27 PM
IIHS Small Car Test: Three Gruesome Slow-Motion Crash Videos	AK370Z	Other Vehicles	13	04-15-2009 09:42 AM

04-19-2021, 09:39 AM	#11 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,298 Drives: Tricycle Rep Power: 589151	Getting to the shop through the week was a bust. I got my 2nd covid shot and that oretty much gave be covid light and I was sick for a couple days. Saturday was the main day I needed to be there. Met up with Jeff so that we could wrap up the Intake, that happened!. We were going to put BOV but shipping took a while and in true Murphy fashion they showed up at my house after I got back from the shop. Exhaust flanges are a wrap. vbands are on! there's 1/32 between the flange and the alternator but should double to 1/16 when tightened down. SUPER tight but it works. Now for some bitter sweet up turbo up pipe news. I've opted to go with fender dump exhaust for now due to space and will not be running the Fast Intentions Exhaust. This decision means that additional space is now available and no core support (which was there when I made the up pipes) has yielded space as well. I found two mandrel 45's in the shop and then we tested . Passenger side will need one pie at the exhaust flange while the driver side needs nothing. The clean path will reduce a TON of turbulence which means clean boost. There's also less welds so less chances of breaking from heating and cooling. Exhaust tubing will be far away from my tires now, which means I can change the OE steering knuckles out to voodoo or some other billet brand in the future. Most importantly, I can run wide tires with out worrying about hitting the exhaust. It's lame to put time/money into something and change... but i've come to accept that it simply needs to happen to achieve better results. Knowledge/Skill has a lot to do with this as well, I simply know more now and the final layout now known too. Not a lot of pictures because we were getting after it. After the pipes are completed, I will get them to the coater for Cerakote. Then I will send to a different company for another thermal wrap.