Mr. G. Brettin's Slow Motion Leg Hump

gbrettin · 10-23-2020, 11:08 AM

Few shots from the past couple nights. The shock tower cleaned up nice. It didn't take to long to sand because I have a lot of aggressive sand paper left over from carbon fiber mold making. I even used the 60grit orbital in a few spots, which made extremely quick work.

The wheel well was opened up more. I'm using a bit more caution because my eyes had metal debris from Sunday to Wed. Yes, I wear safety glasses. I will be getting a face shield as well now too. My eyes have been flushed out so many times it made them dry (2-3 times an hour flushing Mon - Wed). So yeah, that sucked. A lot.

I made a couple mounting tabs for the bottom of the hole. I will also need to do the same for the top. TBH, the tabs turned out like **** and the welding sucked because I was in a weird *** position. Top tabs should be a whole lot easier. I'm not cutting the tabs out. They work. Only thing it's doing is holding aluminum.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racing in Slow Motion IV	MightyBobo	The Lounge (Off Topic)	4	03-12-2013 08:12 PM
Racing In Slow Motion IV	Robert_K	The Lounge (Off Topic)	1	07-13-2012 11:01 AM
Slow shipping slow response slow everything	thispecialk	Nissan 370Z General Discussions	15	11-01-2010 08:23 PM
Racing in Slow Motion	MightyBobo	The Lounge (Off Topic)	2	12-17-2009 03:27 PM
IIHS Small Car Test: Three Gruesome Slow-Motion Crash Videos	AK370Z	Other Vehicles	13	04-15-2009 09:42 AM

10-23-2020, 11:08 AM	#1 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,302 Drives: Tricycle Rep Power: 589151	Few shots from the past couple nights. The shock tower cleaned up nice. It didn't take to long to sand because I have a lot of aggressive sand paper left over from carbon fiber mold making. I even used the 60grit orbital in a few spots, which made extremely quick work. The wheel well was opened up more. I'm using a bit more caution because my eyes had metal debris from Sunday to Wed. Yes, I wear safety glasses. I will be getting a face shield as well now too. My eyes have been flushed out so many times it made them dry (2-3 times an hour flushing Mon - Wed). So yeah, that sucked. A lot. I made a couple mounting tabs for the bottom of the hole. I will also need to do the same for the top. TBH, the tabs turned out like ** and the welding sucked because I was in a weird * position. Top tabs should be a whole lot easier. I'm not cutting the tabs out. They work. Only thing it's doing is holding aluminum.