My 2010 Sport

sirnixalot

Took some time off work and decided I wanted to punish myself by tackling my dashboard. It has the cracks and peeling that is common and since a used dash is going to be $1k by the time I get it, figured I would try covering it in a basic wet lay up “forged” carbon fiber.

How it started


After heating and scraping the plastic crap off the foam. I also decided to smooth in the gauges, some 2” pvc pipe and body filler got the result I was after.


Had to use some filler in a few spots, then a coat of glazing putty. I sanded it very lightly with 220grit


Using a half pound of 1/4” carbon flakes and epoxy resin I got 3 layers. Was a pain in the *** because you can’t brush on the resin, will just end up with clumps of grey hair. So after the epoxy set up I had to drizzle on more then toss more flakes on.


Current status. I have about another 6 hours of sanding with 80grit to do a final brush on of epoxy to fill in any small pin holes. After that I have some tinted and matted PPG high solid clear to be the final layer.

__________________
2010 Sport - LS3 swap loading
2012 Frontier - BTWTuning VK56DE swap