Pegasus..... errh, Spelling. LOL

Im an idiot, shoulda just gone to Jegs to begin with. Not a terrible price.

I drove over to Earl's and picked mine up :tup:

Thats what I got, Earls. I love their fittings. So jealous you can swing by the place.

Super convenient. They'll make up your custom braided hoses while you wait. If they don't have the fitting, it doesn't exist

If you get bored I may have to have you swing by for the hoses. Excuse to go shop around a bit lol.

For AN fittings and hose. Jegs has most of what you need. I got all of my stuff from there. But for the banjo fitting.

If you know exactly what you need, I can do that for you if needed

fify

More money than brains but that aint saying much with a $1.37 in my pocket.

You got more then me. All I have is 2 nickels to rub together. :icon14:

Those aren't nickels in your pockets you're rubbing. They're your :nutswinger:

:rofl2:

If I had a holes in my pockets, yea. Because the nickels would have falling out. Then I would be playing pocket pool.

Confucius say "man with hand in pocket feel cocky all day"

https://i.imgur.com/UodOUozl.jpg
https://i.imgur.com/1vIYYJJl.jpg

https://i.imgur.com/iK9yJBhl.jpg
https://i.imgur.com/nt514Y1l.jpg

Gbrettin, Bill, JC, Jar and myself hanging out day before the east coast caravan and others arrived for the Z get together.
https://i.imgur.com/v7VQtc3l.jpg

Three nice magma red Z's hanging out together, there was a fourth one hanging out the next day.
https://i.imgur.com/4uj70pWl.jpg

Yay, rocking the fit on the Z cruise cause the Z is a paperweight atm.
https://i.imgur.com/BBeu9rRl.jpg

Cutting up hoods at the meetup. 3 cars got Trackspec vents installed that weekend.
https://i.imgur.com/IS3vo8al.jpg

fify

Bill came through and bought a winch for my garage! Badass. We had to get my broke dik car off the lift and then back on after Lein's shifter linkage bolt debacle and install the coolerworx unit while it was all torn apart. Im still not sure if he planned the whole thing to fail on the cruise so we'd install his parts :icon17:

Bill must be on a winch buying spree……that’s like 3 in the last week or so :tup:

All your other accessories, sweeeeeeet !!!!
You’ll be :driving: in no time

I bought a new toy to toss into the mix so I gotta redo and rethink the line plumbing. Stay tuned!

Made ya look.

A few new items and some install pics.
https://i.imgur.com/MlJx0Hyl.jpg?1
https://i.imgur.com/fWyYXs6l.jpg
https://i.imgur.com/URV2A7al.jpg
http://i.imgur.com/mRnmaXZl.jpg
https://i.imgur.com/ReRhMEfl.jpg
https://i.imgur.com/F3tlZI4l.jpg

Picked up all new Vibrant 4 ply silicone couplers and clamps. Going to replace all the bp kit oe parts. Talked with Mr. Phunk about building me an intercooler to work with his billet drag style intake. Still need to order a new flex pipe and have the pos bp one cut out and new one welded in.

looking good kin folk!

One more line to make after I alter the turbo drain flange a bit. Dropped the oil cooler thermostat for the time being. Running out of time before Rusty's meetup. everything should be buttoned up tomorrow and then I can put some oil in the old girl and see what happens when the start button is pressed.
https://i.imgur.com/vJcbrQjl.jpg
https://i.imgur.com/vx4QPY0l.jpg
https://i.imgur.com/EAx4oVhl.jpg

Fingers crossed she is all good when she lights off.

And another delay. Need a 30* fitting to clear on the oil drain flange. **** me running. Ordered should be here day before I leave at 5 am for Rusty's.

I thought that straight fitting would be ok but it puts a bend on the line right at the fitting that I dont like.

It's very difficult to know the exact fittings in tight places. I know that first hand. lol :icon17:

She started up Sunday.

Was pretty excited and forgot to to vband the downpipe. It was loud but she ran!

this build is so nice!

I appreciate the compliment. :tup: