Nissan 370Z Forum
Page 23 of 27 « First 132122 23 2425 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Member's 370Z Gallery (http://www.the370z.com/members-370z-gallery/)
-   -   Madwi's picture dump and crap (http://www.the370z.com/members-370z-gallery/122773-madwis-picture-dump-crap.html)

madwi 04-22-2021 10:47 PM
Quote:
Originally Posted by Rusty (Post 3992864)
I was never a big fan of those greaseable turbo's. When I was at Elliott TurboMachinery. I've seen grease get cooked and turn into wax and asphalt around bearings. If you are going with a different turbo company. Tell the chitheads that you want the old turbo back, uncleaned. This way you can look at the grease and see what condition it is in.
Yeah, Im not a fan of them at all. :icon17:

Hotrodz 04-23-2021 09:28 AM
Have you talk to Elmo about the turbo he is using?

madwi 04-23-2021 10:49 AM
Quote:
Originally Posted by Hotrodz (Post 3992926)
Have you talk to Elmo about the turbo he is using?
Not yet, it is on my to-do list!

madwi 04-23-2021 10:49 AM
I need to hit up sasha and ask what should fit the manifold.

Spooler 04-23-2021 11:07 AM
Ask Al- (Solidius on the forum). He is using an oil fed turbo with an Exa pump.

madwi 04-23-2021 11:08 AM
Quote:
Originally Posted by Spooler (Post 3992935)
Ask Al- (Solidius on the forum). He is using an oil fed turbo with an Exa pump.
Exa pump is in the shopping cart also. :tup:

Spooler 04-23-2021 11:08 AM
Quote:
Originally Posted by Hotrodz (Post 3992926)
Have you talk to Elmo about the turbo he is using?
I am perty sure all that is custom work to make it fit by MA.

madwi 04-23-2021 11:19 AM
Quote:
Originally Posted by Spooler (Post 3992937)
I am perty sure all that is custom work to make it fit by MA.
I think he has a G series.

madwi 04-23-2021 12:01 PM
exa pump w/ -10AN fittings ordered. :tup:

Spooler 04-23-2021 12:06 PM
I texted Al. Waiting for him to respond.

madwi 04-23-2021 12:12 PM
Quote:
Originally Posted by Spooler (Post 3992947)
I texted Al. Waiting for him to respond.
Thanks buddy, I appreciate it. :tup:

Spooler 04-23-2021 12:33 PM
Al has a 6870 Precision Turbo. You don't have to modify the kit to get it to fit.

madwi 04-23-2021 12:34 PM
Quote:
Originally Posted by Spooler (Post 3992955)
Al has a 6870 Precision Turbo. You don't have to modify the kit to get it to fit.
Thank you sir! Ill check out all the dimensions on that bad boy.

madwi 04-23-2021 12:38 PM
Can you ask if he has the 1.15 A/R divided?

Spooler 04-23-2021 01:02 PM
Divided with a 1.32 AR.

madwi 04-23-2021 01:04 PM
Quote:
Originally Posted by Spooler (Post 3992962)
Divided with a 1.32 AR.
Go big or go home!

Hotrodz 04-23-2021 01:07 PM
Quote:
Originally Posted by madwi (Post 3992963)
Go big or go home!
Every time!

Sent from my SM-G965U using Tapatalk

Spooler 04-23-2021 01:15 PM
Quote:
Originally Posted by madwi (Post 3992963)
Go big or go home!
Reality is the VQ37VHR moves a tone of air. If I had to buy my turbo's again I would go with the 1.0x AR's. I can give up some in the midrange and move it to the top with ease.

Spooler 04-23-2021 01:19 PM
Watch my IAT's get out of control when I get it retuned. It is gonna happen. Back pressure is going to get out of whack and start making hot air.

madwi 04-23-2021 01:24 PM
Quote:
Originally Posted by Spooler (Post 3992966)
Watch my IAT's get out of control when I get it retuned. It is gonna happen. Back pressure is going to get out of whack and start making hot air.
It never ends huh.

Spooler 04-23-2021 01:36 PM
Al says NO LAG!!!!

Spooler 04-23-2021 01:39 PM
Quote:
Originally Posted by madwi (Post 3992967)
It never ends huh.
I end up at whatever it will be. I am done wanting more power. I just figured why I am getting it retuned for boost by gear, might as well. Plus I have an Cast intake now that can hold it. Why not.

madwi 04-23-2021 02:19 PM
Quote:
Originally Posted by Spooler (Post 3992969)
I end up at whatever it will be. I am done wanting more power. I just figured why I am getting it retuned for boost by gear, might as well. Plus I have an Cast intake now that can hold it. Why not.
Absolutely.

madwi 04-24-2021 05:59 PM
Quote:
Originally Posted by Spooler (Post 3992968)
Al says NO LAG!!!!
That is good to hear. :tup:

madwi 04-27-2021 09:16 PM
Anyone in need of a turbo, get in touch with Elmo370z :tup: great guy with good connections.

Hotrodz 04-27-2021 10:04 PM
Quote:
Originally Posted by madwi (Post 3993365)
Anyone in need of a turbo, get in touch with Elmo370z :tup: great guy with good connections.
Told you!:tiphat:

madwi 04-27-2021 10:06 PM
Quote:
Originally Posted by Hotrodz (Post 3993377)
Told you!:tiphat:
:iagree:

madwi 04-28-2021 06:55 PM
Exa pump showed up to the house today. :rock: Gonna try and mount that big ol bastard this weekend.

gbrettin 04-29-2021 02:00 PM
Quote:
Originally Posted by madwi (Post 3993479)
Exa pump showed up to the house today. :rock: Gonna try and mount that big ol bastard this weekend.
I heard a few zip ties to the front sway bar will work just fine.

madwi 04-29-2021 02:11 PM
Quote:
Originally Posted by gbrettin (Post 3993581)
I heard a few zip ties to the front sway bar will work just fine.
Now that is ******* genius! What a smarty that person must be.

madwi 04-29-2021 03:49 PM
Garage got a new toy ordered today.

https://i.imgur.com/x8X0RXcl.jpg

Rusty 04-29-2021 04:54 PM
Man cave up grades. :tup:

old guy 04-29-2021 08:34 PM
Sweeeeet

madwi 04-30-2021 06:56 AM
Quote:
Originally Posted by old guy (Post 3993639)
Sweeeeet
Im kinda excited about this purchase! Should hold the temp well throughout the year.

madwi 05-14-2021 10:36 AM
Plan on tapping into where the oil temp sensor goes on the block for turbo oil feed. Anyone see any issues with this plan?
I ordered some fittings that were mentioned in the 'Add a oil pressure gauge' diy thread.
https://i.imgur.com/zrCDi8Cl.jpg

Rusty 05-14-2021 10:42 AM
Depending on how much volume you need. If you need more volume, the line for the oil cooler would be a good place to tap into. Otherwise. I think you're fine.

redondoaveb 05-14-2021 11:25 AM
Quote:
Originally Posted by Rusty (Post 3995164)
Depending on how much volume you need. If you need more volume, the line for the oil cooler would be a good place to tap into. Otherwise. I think you're fine.
^this. I tee'd off my thermostatic plate for my sc. The fitting on the supercharger was designed to restrict the amount of flow.

JARblue 05-14-2021 11:47 AM
Quote:
Originally Posted by madwi (Post 3995161)
Plan on tapping into where the oil temp sensor goes on the block for turbo oil feed. Anyone see any issues with this plan?
I ordered some fittings that were mentioned in the 'Add a oil pressure gauge' diy thread.
Thank you for the inspiration :tiphat:

I finally ordered these fittings for my oil pressure gauge that I've had sitting around for nearly 2 years now :icon17:

madwi 05-14-2021 11:59 AM
Quote:
Originally Posted by redondoaveb (Post 3995169)
^this. I tee'd off my thermostatic plate for my sc. The fitting on the supercharger was designed to restrict the amount of flow.
Sounds good, Ill order up some fittings.

madwi 05-14-2021 01:02 PM
Got any leads on where to get a t fitting?


All times are GMT -5. The time now is 04:30 AM.
Page 23 of 27 « First 132122 23 2425 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2