1LIFE's Dynosty Built 820whp/733tq 1st ever VHR Haltech Elite ran TT370

Masterbeatty · 09-13-2015, 12:24 PM

Nice!

Are you going to have a shop do the spl bushings? If not then I suggest making a heavy duty puller for rear bushing. Mine was a royal pain in the dik. I had it in the freezer for a week and it still didn't help.

1LIFE · 09-13-2015, 01:15 PM

Quote:

Originally Posted by Masterbeatty

Nice!

Are you going to have a shop do the spl bushings? If not then I suggest making a heavy duty puller for rear bushing. Mine was a royal pain in the dik. I had it in the freezer for a week and it still didn't help.

Ha-ha yeah I've heard about the difficulty of swapping the bushings out, so that's going to be a job I'll have to let the shop do. Kuddos to you for gettin er' done lol

Masterbeatty · 09-13-2015, 01:33 PM

Quote:

Originally Posted by 1LIFE

Ha-ha yeah I've heard about the difficulty of swapping the bushings out, so that's going to be a job I'll have to let the shop do. Kuddos to you for gettin er' done lol

I was so happy when I finished it because the results were amazing. Night and day difference and the gear whine is very minimal. But it sounds like a race car at full throttle and around 40mph. But my wife and I avoid that speed as much as possible.

Carbon_z · 09-13-2015, 02:31 PM

You know I really dislike you right now lol.

QUOTE=1LIFE;3307883]Bubble bath

What's next

[/QUOTE]

1LIFE · 09-13-2015, 02:52 PM

[QUOTE=Carbon_z;3308214]You know I really dislike you right now lol.

I am aware of this

Lt8Che · 09-14-2015, 09:27 AM

Build look great! I hit you up on FB messenger (Moses gave me your name). Just looking at some details to assist with my G37x build.

1LIFE · 10-04-2015, 08:20 PM

Haven't posted any updates for a while because I haven't really changed anything, just been enjoying the hell out of it. Yesterday I finally ditched my heat cycled out Advan AD08 tires that I basically had NO traction with (was fun blowing the tires out at 100mph in 5th tho lol). So since its near winter I needed a tire to hold me over till spring that didn't need to be stored in doors during cold weather and I ended up with S-04 pole positions. Well to my delight they hook like hell!!! 2nd gear I still have feather throttle a bit but on up is basically grip at wot. So far they definatly suck in the corners but I'm sure will get better with wear. Sooo impressed with the straight line grip tho. Just wanted to share my excitement and also some pretty big things are in the works that will be made in few months. Going to be setting her up the best I can for some 1/2 mile racing next spring

1LIFE · 01-09-2016, 07:07 PM

Been a while since I've updated and wanted to share with you guys some big additions and changes that will be happening over the next couple months. I have RPM 6pt roll bar, Corbeau 5pt harness's, Corbeau FX1 Microsuede, and Sparco wheel with NRG quick release on order and im hoping to have every thing installed by early next month. Will be doing some sound deadening while I got everything ripped out as well as fixing some of my original shitty audio wire job. Also got new shoes on order (not disclosing yet

) and will be rolling on them when I break her back out of hibernation

Hope you guys are having a great start to the new year!!

hjo1078 · 01-09-2016, 07:17 PM

Very nice bro

Sent from my iPhone using Tapatalk

Hotrodz · 01-09-2016, 07:35 PM

Looking forward to see the new bolt ons!

1LIFE · 03-21-2016, 01:37 PM

Wanted to give a little spring time/pre ZdayZ update here. Finally got all the parts I've been accumulating all winter on and wanted to share the updates. I'm extremely happy with my RPM roll bar and new fixed back seats w/5 point harnesses. Also finally had my axles, solid diff and sub frame bushings, solid tranny mount, Z1diff cover, spl camber arms, arp wheel studs, and carbotech pads installed. Very anxious to put everything to the test soon

just wanted to give a quick update.. Pics with the new shoes on coming soon

sorry bout the big pics

Hotrodz · 03-21-2016, 01:47 PM

I love it man you are going to be blown away with how more connected the car feels.

Sent from my SM-N910P using Tapatalk

tturbo370z · 03-21-2016, 02:12 PM

Very nice. Axles have been on my wants but havnt decided yet on what diff to go with. Did you wield yours? Or what did u go with? What did u use for solid tranny mounting? Your pic makes me want to go Into the picture and pull the parts out i havnt bought and been to lazy to do ��

cigarclifford · 03-21-2016, 02:14 PM

Outstanding Mr Donnie

-Clifford

1LIFE · 03-21-2016, 04:33 PM

Quote:

Originally Posted by tturbo370z

Very nice. Axles have been on my wants but havnt decided yet on what diff to go with. Did you wield yours? Or what did u go with? What did u use for solid tranny mounting? Your pic makes me want to go I got he picture and pull the parts onto havnt bought and been to lazy to do ��

Thanks guys!
tturbo my diff is not welded and I am using OEM diff. The tranny mount is Z1, I had their urethane mount already and switched to the solid aluminum. It along with my other solid mounts make for a noisy cabin, basically like full out race car. I like that though

Haha

09-13-2015, 12:24 PM	#91 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122866	Nice! Are you going to have a shop do the spl bushings? If not then I suggest making a heavy duty puller for rear bushing. Mine was a royal pain in the dik. I had it in the freezer for a week and it still didn't help. 1LIFE likes this. __________________ 2011 MB 6MT Masterbeatty journal

09-13-2015, 02:31 PM	#94 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,695 Drives: Carbon Fiber 370z Rep Power: 18	You know I really dislike you right now lol. QUOTE=1LIFE;3307883]Bubble bath What's next [/QUOTE] hjo1078, tturbo370z and Zbrah like this. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

09-13-2015, 02:52 PM	#95 (permalink)
1LIFE Track Member Join Date: Dec 2012 Location: Louisville, Ky Posts: 513 Drives: Fast Lane Rep Power: 61	[QUOTE=Carbon_z;3308214]You know I really dislike you right now lol. I am aware of this __________________ Built GReddy TT "I downshift next to Prius so the driver hears me hurting the environment"

09-14-2015, 09:27 AM	#96 (permalink)
Lt8Che Enthusiast Member Join Date: Jul 2015 Location: Texas Posts: 300 Drives: 10-G37x-Black-7AT Rep Power: 9	Build look great! I hit you up on FB messenger (Moses gave me your name). Just looking at some details to assist with my G37x build. 1LIFE likes this.

10-04-2015, 08:20 PM	#97 (permalink)
1LIFE Track Member Join Date: Dec 2012 Location: Louisville, Ky Posts: 513 Drives: Fast Lane Rep Power: 61	Haven't posted any updates for a while because I haven't really changed anything, just been enjoying the hell out of it. Yesterday I finally ditched my heat cycled out Advan AD08 tires that I basically had NO traction with (was fun blowing the tires out at 100mph in 5th tho lol). So since its near winter I needed a tire to hold me over till spring that didn't need to be stored in doors during cold weather and I ended up with S-04 pole positions. Well to my delight they hook like hell!!! 2nd gear I still have feather throttle a bit but on up is basically grip at wot. So far they definatly suck in the corners but I'm sure will get better with wear. Sooo impressed with the straight line grip tho. Just wanted to share my excitement and also some pretty big things are in the works that will be made in few months. Going to be setting her up the best I can for some 1/2 mile racing next spring hjo1078, Hotrodz, iBenJAMM1N and 1 others like this. __________________ Built GReddy TT "I downshift next to Prius so the driver hears me hurting the environment"

01-09-2016, 07:07 PM	#98 (permalink)
1LIFE Track Member Join Date: Dec 2012 Location: Louisville, Ky Posts: 513 Drives: Fast Lane Rep Power: 61	Been a while since I've updated and wanted to share with you guys some big additions and changes that will be happening over the next couple months. I have RPM 6pt roll bar, Corbeau 5pt harness's, Corbeau FX1 Microsuede, and Sparco wheel with NRG quick release on order and im hoping to have every thing installed by early next month. Will be doing some sound deadening while I got everything ripped out as well as fixing some of my original shitty audio wire job. Also got new shoes on order (not disclosing yet ) and will be rolling on them when I break her back out of hibernation Hope you guys are having a great start to the new year!! hjo1078, Hotrodz, cigarclifford and 3 others like this. __________________ Built GReddy TT "I downshift next to Prius so the driver hears me hurting the environment"

01-09-2016, 07:17 PM	#99 (permalink)
hjo1078 Track Member Join Date: May 2011 Location: virginia Age: 45 Posts: 572 Drives: twin turbo 370z Rep Power: 5394	Very nice bro Sent from my iPhone using Tapatalk 1LIFE likes this.

01-09-2016, 07:35 PM	#100 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	Looking forward to see the new bolt ons! 1LIFE likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

03-21-2016, 01:37 PM	#101 (permalink)
1LIFE Track Member Join Date: Dec 2012 Location: Louisville, Ky Posts: 513 Drives: Fast Lane Rep Power: 61	Wanted to give a little spring time/pre ZdayZ update here. Finally got all the parts I've been accumulating all winter on and wanted to share the updates. I'm extremely happy with my RPM roll bar and new fixed back seats w/5 point harnesses. Also finally had my axles, solid diff and sub frame bushings, solid tranny mount, Z1diff cover, spl camber arms, arp wheel studs, and carbotech pads installed. Very anxious to put everything to the test soon just wanted to give a quick update.. Pics with the new shoes on coming soon sorry bout the big pics hjo1078, Hotrodz, cigarclifford and 2 others like this. __________________ Built GReddy TT "I downshift next to Prius so the driver hears me hurting the environment"

03-21-2016, 01:47 PM	#102 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	I love it man you are going to be blown away with how more connected the car feels. Sent from my SM-N910P using Tapatalk 1LIFE and cigarclifford like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

03-21-2016, 02:12 PM	#103 (permalink)
tturbo370z Track Member Join Date: May 2012 Location: Az Posts: 622 Drives: 09 370z sport 6mt Rep Power: 127	Very nice. Axles have been on my wants but havnt decided yet on what diff to go with. Did you wield yours? Or what did u go with? What did u use for solid tranny mounting? Your pic makes me want to go Into the picture and pull the parts out i havnt bought and been to lazy to do �� Hotrodz and cigarclifford like this. __________________ JUST STUFF 800whp700wtq Tturbo370z 800whp build https://instagram.com/jdm_370z Last edited by tturbo370z; 03-21-2016 at 05:49 PM.

03-21-2016, 02:14 PM	#104 (permalink)
cigarclifford A True Z Fanatic Join Date: Apr 2013 Location: Cali State Hospital Posts: 13,351 Drives: 2017 Corvette Z06 Rep Power: 458713	Outstanding Mr Donnie -Clifford Hotrodz and 1LIFE like this. __________________ -Clifford

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynosty It is I suppose?	Rid3_FaM0uS	Tuning	31	02-27-2015 07:26 PM
Dynosty	37winner	Tuning	27	02-14-2015 08:59 PM
Uprev tune @Dynosty	12155ny	Tuning	11	01-22-2015 07:49 PM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 06:09 PM
Haltech ecu in aus	Aus370z	Australia/New Zealand	13	01-19-2011 07:51 PM