MAZOC Firearms

m4a1mustang · 09-13-2011, 07:10 AM

Quote:

Originally Posted by brian0128

If you decide to buy one, here is a link to a chart with the pros and cons of each.

Comparison Chart of Major AR Brands - M4Carbine.net Forums

You can get a Colt 6920 for $990 at G&R Tactical right now and the Colt has a lifetime warranty.

I've been looking at this chart. Spike's Tactical seems like a great value and I have been reading up on them a bit. They are backlogged quite a bit right now, but I could get a completed upper and lower from Brownells for $750.

Could also just get the completed upper and put together my own lower.

I've also been looking at the BCM uppers.

Seems like most of the stripped lowers are created equally. If I buy a completed upper and put the lower together myself, this should be very easy.

MacCool · 09-13-2011, 07:25 AM

Quote:

Originally Posted by m4a1mustang

Seems like most of the stripped lowers are created equally. If I buy a completed upper and put the lower together myself, this should be very easy.

Not much difference in lowers. The only variable tends to be quality control. You are more likely to get an out-of-spec lower with some companies than with others. I'd be looking hard for BCM blems. Try BCM, Rainier Arms, G&R Tactical.

m4a1mustang · 09-13-2011, 07:29 AM

Quote:

Originally Posted by MacCool

Not much difference in lowers. The only variable tends to be quality control. You are more likely to get an out-of-spec lower with some companies than with others. I'd be looking hard for BCM blems. Try BCM, Rainier Arms, G&R Tactical.

Thanks

eastwest2300 · 09-13-2011, 08:32 AM

Steve, this whole process of putting together your weapon is gonna blow your mind, I hope you're ready for it.

eastwest2300 · 09-13-2011, 02:47 PM

I havent fired my AR-15 yet, and I just thought I'd do a cleaning and a lubrication on it, and surprisingly the bolt was pretty dirty..

MacCool · 09-13-2011, 02:57 PM

Quote:

Originally Posted by eastwest2300

I havent my AR-15 yet, and I just thought I'd do a cleaning and a lubrication on it, and surprisingly the bolt was pretty dirty..

I clean my rifles about every 2000-3000 rounds. Maybe run a bore snake through the barrel a little more frequently than that, but otherwise I just keep the BCG nice and wet and they run fine.

eastwest2300 · 09-13-2011, 03:22 PM

Quote:

Originally Posted by MacCool

I clean my rifles about every 2000-3000 rounds. Maybe run a bore snake through the barrel a little more frequently than that, but otherwise I just keep the BCG nice and wet and they run fine.

Dude, I was shocked, I mean I just got mine, and its never been fired, and to see the bolt dirty was just a surprise. I guess you live and learn.

MacCool · 09-13-2011, 03:37 PM

Quote:

Originally Posted by eastwest2300

Dude, I was shocked, I mean I just got mine, and its never been fired, and to see the bolt dirty was just a surprise. I guess you live and learn.

Many mfgrs test fire them at the factory. With some of the better quality BCGs, they are proof fired with a high pressure proof load, then magnafluxed...those are marked HPT and MPI (High Pressure Test and Magnetic Particle Inspected).

eastwest2300 · 09-13-2011, 03:43 PM

Quote:

Originally Posted by MacCool

Many mfgrs test fire them at the factory. With some of the better quality BCGs, they are proof fired with a high pressure proof load, then magnafluxed...those are marked HPT and MPI (High Pressure Test and Magnetic Particle Inspected).

Thanks brother, excellent information.. eRep given.

Hell, now I know.

Kirkster · 09-13-2011, 03:44 PM

Quote:

Originally Posted by MacCool

Many mfgrs test fire them at the factory. With some of the better quality BCGs, they are proof fired with a high pressure proof load, then magnafluxed...those are marked HPT and MPI (High Pressure Test and Magnetic Particle Inspected).

most if not all mfgrs test fire the weapons, because you would scream bloody murder if your new bang stick did not go bang every time you pull the trigger...

High end mfgrs usually send a test target with the weapon...

The only way to get an unfired weapon is to put it together yourself...

eastwest2300 · 09-13-2011, 03:47 PM

Quote:

Originally Posted by Kirkster

most if not all mfgrs test fire the weapons, because you would scream bloody murder if your new bang stick did not go bang every time you pull the trigger...

High end mfgrs usually send a test target with the weapon...

The only way to get an unfired weapon is to put it together yourself...

Come on man, if they're gonna fire them, they should clean them..hehe

Kirkster · 09-13-2011, 03:54 PM

Quote:

Originally Posted by eastwest2300

Come on man, if they're gonna fire them, they should clean them..hehe

LoL... my $3,600 custom 1911 came with residue in the barrel...

get used to it....

MacCool · 09-13-2011, 04:11 PM

Test firing the assembed weapon for function is commonly done, but pressure testing isn't necessarily. The M4 TDP calls for HPT and MPI of the barrel and bolt. Those individual components are individually tested with a high pressure proof load, then the whole rifle is test fired for function.

HPT and MPI are a little controversial. Not sure that it's necessary given modern manufacturing techinques and materials, but it is true that because of the expense, it's one way to distinguish the higher-end weapons

eastwest2300 · 09-13-2011, 04:14 PM

Quote:

Originally Posted by MacCool

Test firing the assembed weapon for function is commonly done, but pressure testing isn't necessarily. The M4 TDP calls for HPT and MPI of the barrel and bolt. Those individual components are individually tested with a high pressure proof load, then the whole rifle is test fired for function.

HPT and MPI are a little controversial. Not sure that it's necessary given modern manufacturing techinques and materials, but it is true that because of the expense, it's one way to distinguish the higher-end weapons

MacCool, how the heck do you know all this? lol..

Red__Zed · 09-13-2011, 04:17 PM

Quote:

Originally Posted by Kirkster

LoL... my $3,600 custom 1911 came with residue in the barrel...

get used to it....

Doesn't mean it is right.

Crazy thing is my $600 ria arrived with the 2 casings required by new york, but so meticulously cleaned that you'd never know it had been fired...

09-13-2011, 08:32 AM	#184 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,824 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Steve, this whole process of putting together your weapon is gonna blow your mind, I hope you're ready for it. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

09-13-2011, 02:47 PM	#185 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,824 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	I havent fired my AR-15 yet, and I just thought I'd do a cleaning and a lubrication on it, and surprisingly the bolt was pretty dirty.. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium Last edited by eastwest2300; 09-13-2011 at 03:20 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone here into firearms?	tvfreakazoid	The Lounge (Off Topic)	6149	01-18-2024 11:05 AM
MAZOC Zs and BBQ 9 July	ZCarMan	MAZOC	327	07-12-2011 07:24 AM
Firearms questions?	mark_taba85	The Lounge (Off Topic)	24	04-02-2011 01:55 PM
For the Firearms guys	Division	The Lounge (Off Topic)	55	12-06-2009 09:36 AM

09-13-2011, 04:11 PM	#193 (permalink)
MacCool A True Z Fanatic Join Date: Apr 2011 Location: Midwest Posts: 1,349 Drives: 370Z PW 2014 Rep Power: 16	Test firing the assembed weapon for function is commonly done, but pressure testing isn't necessarily. The M4 TDP calls for HPT and MPI of the barrel and bolt. Those individual components are individually tested with a high pressure proof load, then the whole rifle is test fired for function. HPT and MPI are a little controversial. Not sure that it's necessary given modern manufacturing techinques and materials, but it is true that because of the expense, it's one way to distinguish the higher-end weapons