The New "What did you do with your Z today" (with off topic replies) V

XwChriswX · 05-01-2013, 08:37 PM

Quote:

Originally Posted by Pintsize725

I really fvcking do.

Thanks for finishing the lip for me!!! Let me know when you want that drink.

Here's a shot of the Bondo fix we did for anyone interested. I'll get some painted results tomorrow when the sun is out again.

Attachment 68152

I also put my license plate on the Stillen bracket and found this out.
What it should look like:
Attachment 68153

How it looked when fully screwed in:
Attachment 68154

Does it not have another nut on it that you can use to tighten it where it's horizontal?

Pintsize725 · 05-01-2013, 08:38 PM

Quote:

Originally Posted by XwChriswX

Does it not have another nut on it that you can use to tighten it where it's horizontal?

I'll have to recheck the box that it was sent in but I'm pretty sure it wasn't included.

XwChriswX · 05-01-2013, 08:39 PM

Quote:

Originally Posted by Pintsize725

I'll have to recheck the box that it was sent in but I'm pretty sure it wasn't included.

Then just run by any hardware store, and get a bolt to put on the post.

You insert it in all the way, and then when it's as far in, bring it back out till it's level. Then tighten the bolt down to the base.

blackcherry20 · 05-01-2013, 08:39 PM

Quote:

Originally Posted by Pintsize725

I really fvcking do.

Thanks for finishing the lip for me!!! Let me know when you want that drink.

Here's a shot of the Bondo fix we did for anyone interested. I'll get some painted results tomorrow when the sun is out again.

Attachment 68152

I also put my license plate on the Stillen bracket and found this out.
What it should look like:
Attachment 68153

How it looked when fully screwed in:
Attachment 68154

hi pint!!!

Uhmmmm...

kenchan · 05-01-2013, 08:41 PM

woot!

real happy my Z no longer looks like my grandma's flourescent toilet lamp from 35yrs ago.

Pintsize725 · 05-01-2013, 08:41 PM

Quote:

Originally Posted by XwChriswX

Then just run by any hardware store, and get a bolt to put on the post.

You insert it in all the way, and then when it's as far in, bring it back out till it's level. Then tighten the bolt down to the base.

Well another thing we considered was that the license plate might end up scraping the lip when installed. It got pretty damn close to the bottom fang area before it was tightened all the way....

JARblue · 05-01-2013, 08:43 PM

Quote:

Originally Posted by XwChriswX

Then just run by any hardware store, and get a bolt to put on the post.

You insert it in all the way, and then when it's as far in, bring it back out till it's level. Then tighten the bolt down to the base.

Pint, I think he means you adjust it at the rusted bolt to straighten it out. Might as well clean it up at the same time.

XwChriswX · 05-01-2013, 08:43 PM

Quote:

Originally Posted by Pintsize725

Well another thing we considered was that the license plate might end up scraping the lip when installed. It got pretty damn close to the bottom fang area before it was tightened all the way....

Err... Haven't heard of these issues from other people with the stillen plates before.

Pintsize725 · 05-01-2013, 08:44 PM

Quote:

Originally Posted by JARblue

Pint, he means you adjust it at the rusted bolt to straighten it out. Might as well clean it up at the same time.

Really....odd.

I suppose. I still want to look into that other idea.

GaleForce · 05-01-2013, 08:46 PM

Quote:

Originally Posted by Pintsize725

I really fvcking do.

Thanks for finishing the lip for me!!! Let me know when you want that drink.

Here's a shot of the Bondo fix we did for anyone interested. I'll get some painted results tomorrow when the sun is out again.

Attachment 68152

I also put my license plate on the Stillen bracket and found this out.
What it should look like:
Attachment 68153

How it looked when fully screwed in:
Attachment 68154

Remove the screw thats secures the bracket that holds the plate. Reapply lock tight to the screw, position bracket (how ever you want your plate situated), reinstall screw. Enjoy your horizontal plate. That's what you have to do when you buy it new. The threads for your toe hook are obviously different than the last vehicle.

JARblue · 05-01-2013, 08:47 PM

Quote:

Originally Posted by kenchan

woot!

real happy my Z no longer looks like my grandma's flourescent toilet lamp from 35yrs ago.

you could have just gotten LEDs though; I highly doubt Grandma was running them in the light fixtures in her bathroom

XwChriswX · 05-01-2013, 08:50 PM

Quote:

Originally Posted by GaleForce

Remove the screw thats secures the bracket that holds the plate. Reapply lock tight to the screw, position bracket (how ever you want your plate situated), reinstall screw. Enjoy your horizontal plate. That's what you have to do when you buy it new. The threads for your toe hook are obviously different than the last vehicle.

Rushing in to save the dayyyyyyyy!!!!!!

GALEFORCE!!

GaleForce · 05-01-2013, 08:51 PM

Quote:

Originally Posted by XwChriswX

Rushing in to save the dayyyyyyyy!!!!!!

GALEFORCE!!

kenchan · 05-01-2013, 08:51 PM

Quote:

Originally Posted by happytheman

Nope! No daughter! I believe I may have mentioned to Baja that my wife wants to visit/move to Hawaii!

you must have a hot wife then, people thinking she's your daughter.

Quote:

Originally Posted by Pintsize725

I'll have to recheck the box that it was sent in but I'm pretty sure it wasn't included.

hope you find that nut. if not, acehardware.

Quote:

Originally Posted by alcheng

Good, they want to filter out the taffyapples and hippos drivers....

right, Mr.kenchan??

mr.alcheng-

blahahahahaha! i honestly wished my fit was a tad smaller.

Quote:

Originally Posted by GaleForce

You're a good man Jar

x100000000000000

Quote:

Originally Posted by blackcherry20

hi kenchan

yepp-very ready

its on may 12 so i have a weekend to prepare my mind

lol!

msbc. mental training before the event.

Quote:

Originally Posted by GaleForce

WTF? Isn't that the reason for having a forum? Why do we need a thread with a (possibly, not likely) condensed list of suspension stuff that nobody will use the forum search for? Seriously, the entire forum is littered with answers to his thread...

mr.gale - yah.... its like if he's too lazy to search, and he has no f-king idea how suspension works, it's best he just leaves his car alone and just work on his driving skillz.

Quote:

Originally Posted by Isamu

boo!

it rained this mornin... for the duration of my bike ride into work..

woah, sorry to hear about the drenched bike commute to work, mr. mu

kenchan · 05-01-2013, 08:53 PM

Quote:

Originally Posted by JARblue

you could have just gotten LEDs though; I highly doubt Grandma was running them in the light fixtures in her bathroom

i just couldn't stand that frosted white/cream color

05-01-2013, 08:41 PM	#4955 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	woot! real happy my Z no longer looks like my grandma's flourescent toilet lamp from 35yrs ago. XwChriswX, GaleForce and blackcherry20 like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) IV	happytheman	The Lounge (Off Topic)	10020	04-09-2013 11:47 AM
The New "What did you do with your Z today" (with off topic replies) III	happytheman	The Lounge (Off Topic)	9956	02-10-2013 02:13 PM
The New "What did you do with your Z today" (with off topic replies) II	happytheman	The Lounge (Off Topic)	10004	12-24-2012 07:31 PM
The New "What did you do with your Z today" (with off topic replies)	happytheman	The Lounge (Off Topic)	10265	10-31-2012 11:15 PM
We learned a valuable lesson about the "VDC OFF" button today thanks to b1ades	birdmanx1	Mid-Atlantic Region	167	09-01-2011 09:50 AM