Anyone here into firearms?

Rusty

I would start with a single stage press to learn the basic's, before getting a Dillion. Decapping, cleaning the brass, sizing, trimming to length, case mouth flaring, priming, powder charging, bullet seating. Dillion's a good company. Great customer service. If you're reloading a lot every weekend (300+). You might get that.

Equipment; Can't go wrong with a RCBS Rock Chucker press (had mine since '79 ). Other presses are out there.
A Lyman Universal Case Trimmer (auto's head space off of the case mouth and base. Something you want to keep an eye on). I'm on my second one. Also use a Wilson for rifle.
Hornady Lock-N-Load Sonic Cleaner (faster and cleans the inside of the case better then a vibrator).
Dies, you have RCBS, Redding, Forster (I have all 3). Take your pick, BUT get carbide dies.

Manuals. Get as many as you can, and up-date them every year. The Lyman manual is a must because it has loads for other manufacture's bullets. Jacketed and cast.

Websites for equipment. Two I use the most.
https://ads.midwayusa.com/
http://www.sinclairintl.com/

Tips.
https://www.shootingsoftware.com/reloadingtips.htm

I also cast my own bullets in 9mm, 38/357, 40/10mm, 44, and 45 ACP.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html