Anyone here into firearms?

synolimit · 02-20-2015, 10:09 PM

Quote:

Originally Posted by Rusty

ARComp or TAC are great powders for the .223. That's why I bought 8lbs each. I'm shooting the Sierra 69gr Match or the 75gr Hornady Match out of my AR15. Also both powders will work with the .308 AR's.

that TAC was impossible after sandy hook so i tried a few and i really like the AA2230. ive used the 75gr hornady also but my gun likes the 68's. no idea why i do it though, the guns only a 10" so even shooting green tip i cant pass through crap. at 100yrds though its good enough.

Rusty · 02-20-2015, 11:11 PM

Quote:

Originally Posted by Scott@Synergy

that TAC was impossible after sandy hook so i tried a few and i really like the AA2230. ive used the 75gr hornady also but my gun likes the 68's. no idea why i do it though, the guns only a 10" so even shooting green tip i cant pass through crap. at 100yrds though its good enough.

It took since last May to get ARComp. Since May, haven't heard a word on the TAC.

What's the twist in your barrel? Mines an 8.

Nismo89 · 02-21-2015, 03:17 PM

Sent from my iPhone using Tapatalk

Chuy · 02-21-2015, 03:42 PM

Quote:

Originally Posted by jwick

1911 is good. I shot many both off the shelf and custom. Kimber makes a good gun. So does Colt if you get the gold. S&W are nice too. Of the customs I recommend Clarke or Baer

Before this becomes a debate about Kimbers, not saying it is just before. I had a Springfield XDM 3.8 9mm loved the gun! went to the range and somehow got a double primer or powder and it blew the grip and the chamber to hell. I told myself never again and that's why I went with Kimber, steel frame. Springfield is aluminum.

Bulletz4break · 02-21-2015, 04:24 PM

Three ways to stop the .223/556 ammo ban

3 Ways to Stop the .223/5.56 (M855) Ammunition Ban

tvfreakazoid · 02-21-2015, 05:23 PM

Quote:

Originally Posted by Chuy

Before this becomes a debate about Kimbers, not saying it is just before. I had a Springfield XDM 3.8 9mm loved the gun! went to the range and somehow got a double primer or powder and it blew the grip and the chamber to hell. I told myself never again and that's why I went with Kimber, steel frame. Springfield is aluminum.

Damn that sucks. It seems ur hand is fine I hope.
So in a situation like yours, did the ammo company or Springfield do anything for you?

Rusty · 02-21-2015, 08:54 PM

Quote:

Originally Posted by Chuy

Before this becomes a debate about Kimbers, not saying it is just before. I had a Springfield XDM 3.8 9mm loved the gun! went to the range and somehow got a double primer or powder and it blew the grip and the chamber to hell. I told myself never again and that's why I went with Kimber, steel frame. Springfield is aluminum.

Factory loads, or reloads? You can't get a double primer. But you can get too much powder! Also the round before it might have been under charged and not left the barrel. But have enough kick to cycle the slide. Fired the next round and boooom! Seen that happen a time or three.

Tigger · 02-22-2015, 12:09 PM

Quote:

Originally Posted by Chuy

Before this becomes a debate about Kimbers, not saying it is just before. I had a Springfield XDM 3.8 9mm loved the gun! went to the range and somehow got a double primer or powder and it blew the grip and the chamber to hell. I told myself never again and that's why I went with Kimber, steel frame. Springfield is aluminum.

Holy ****. I have the 3.8 compact in .45. That's crazy!

tvfreakazoid · 02-22-2015, 02:30 PM

I'm sure u guys r aware of the m855 ban.
Here's another link.
http://youtu.be/6PaIIChRMBw

2 by 2...hands of blue

tvfreakazoid · 02-22-2015, 02:54 PM

Heres some more info
http://youtu.be/x6AosbT3qII

2 by 2...hands of blue

VABAM · 02-22-2015, 03:09 PM

Quote:

Originally Posted by Chuy

Before this becomes a debate about Kimbers, not saying it is just before. I had a Springfield XDM 3.8 9mm loved the gun! went to the range and somehow got a double primer or powder and it blew the grip and the chamber to hell. I told myself never again and that's why I went with Kimber, steel frame. Springfield is aluminum.

That looks like a casing blow out due to bad/old brass. Happened to me once when using reloaded ammo my dad had bought at a gun show. Luckily the gun was a Berretta 92FS and I was wearing eye pro, had burning powder and brass fragments hit my face. A couple of parts popped out but I was able to put the gun back together at the range. Then my dad took a turn and not even a mag later it happened again. Some people might bad mouth the 92FS but it is a tough gun. Even after having 2 case blow outs in one outing it was functional after a little bit of help. We took a closer look at the batch of ammo and found a few rounds were the casing was visibly cracked. The lesson here is to be careful when purchasing reloaded ammo, especially semi-auto pistol ammo.

6MT · 02-22-2015, 03:57 PM

Too damn cold to go shooting proper today, but the light was nice. So, I thought I'd take some pics this morning.

synolimit · 02-22-2015, 04:59 PM

Quote:

Originally Posted by Rusty

It took since last May to get ARComp. Since May, haven't heard a word on the TAC.

What's the twist in your barrel? Mines an 8.

1:7.

tvfreakazoid · 02-22-2015, 05:00 PM

Is there a big difference between 1/8 and 1/7 twist

2 by 2...hands of blue

Tigger · 02-22-2015, 07:41 PM

Quote:

Originally Posted by VABAM

That looks like a casing blow out due to bad/old brass. Happened to me once when using reloaded ammo my dad had bought at a gun show. Luckily the gun was a Berretta 92FS and I was wearing eye pro, had burning powder and brass fragments hit my face. A couple of parts popped out but I was able to put the gun back together at the range. Then my dad took a turn and not even a mag later it happened again. Some people might bad mouth the 92FS but it is a tough gun. Even after having 2 case blow outs in one outing it was functional after a little bit of help. We took a closer look at the batch of ammo and found a few rounds were the casing was visibly cracked. The lesson here is to be careful when purchasing reloaded ammo, especially semi-auto pistol ammo.

Nothing wrong with the 92FS. Had a 96 Vertec for awhile. Just don't care for the gun. Doesn't suit me well.

02-21-2015, 03:17 PM	#3918 (permalink)
Nismo89 A True Z Fanatic Join Date: Mar 2011 Location: Colora, MD Age: 35 Posts: 15,831 Drives: daily Zen and woosah Rep Power: 37386	Sent from my iPhone using Tapatalk cigarclifford likes this. __________________ Why yes.. Mike Rowe of Dirty Jobs, The Ford Commericals,Deadliest Catch.. is my cousin. Facebook i outta back hand you with my right hand! and call you b*tch!..... and im Left handed!

02-22-2015, 02:30 PM	#3924 (permalink)
tvfreakazoid A True Z Fanatic Join Date: Jan 2009 Location: kommie kali Posts: 1,238 Drives: 2015 Audi S5; 6spd. Rep Power: 10324	I'm sure u guys r aware of the m855 ban. Here's another link. http://youtu.be/6PaIIChRMBw 2 by 2...hands of blue __________________ Mudders milk

02-22-2015, 02:54 PM	#3925 (permalink)
tvfreakazoid A True Z Fanatic Join Date: Jan 2009 Location: kommie kali Posts: 1,238 Drives: 2015 Audi S5; 6spd. Rep Power: 10324	Heres some more info http://youtu.be/x6AosbT3qII 2 by 2...hands of blue __________________ Mudders milk

02-22-2015, 03:57 PM	#3927 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1790	Too damn cold to go shooting proper today, but the light was nice. So, I thought I'd take some pics this morning. Nismo89, Rusty and cigarclifford like this. __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

02-22-2015, 05:00 PM	#3929 (permalink)
tvfreakazoid A True Z Fanatic Join Date: Jan 2009 Location: kommie kali Posts: 1,238 Drives: 2015 Audi S5; 6spd. Rep Power: 10324	Is there a big difference between 1/8 and 1/7 twist 2 by 2...hands of blue __________________ Mudders milk

02-21-2015, 04:24 PM	#3920 (permalink)
Bulletz4break Base Member Join Date: Jan 2015 Location: Pittsburgh Posts: 101 Drives: 2011 370z Rep Power: 10	Three ways to stop the .223/556 ammo ban 3 Ways to Stop the .223/5.56 (M855) Ammunition Ban