Anyone here into firearms?

Chuck33079 · 05-14-2013, 09:46 AM

Yeah, there's paperwork. Takes 5 minutes. You're exactly right on the chl replacing the need for a NICS check. You've already proven you have a clean record, why waste the effort to repeat the process.

Cell · 05-15-2013, 03:20 PM

no one has an opinion on DSarms? That unpopular?

Red__Zed · 05-15-2013, 04:00 PM

Quote:

Originally Posted by Cell

no one has an opinion on DSarms? That unpopular?

Never bought a gun from them, but I do have a charge on my credit card from ammo that I bought in December...that they still haven't shipped.

Cell · 05-15-2013, 04:07 PM

Quote:

Originally Posted by Red__Zed

Never bought a gun from them, but I do have a charge on my credit card from ammo that I bought in December...that they still haven't shipped.

Yea, I have read about there shipping taking forever. I was going to go to the factory and buy an AR15 in person. Was told by a sales rep that I can walk in and out in 15 minutes with a an AR15 if I wanted too. It was something like 900 dollars for a basic AR15.

faya · 05-17-2013, 10:22 AM

Hi! This is my first post on this thread. Anyone who has a kimber 1911? If you were to choose between custom eclipse target vs custom cdp II, what would it be? Thanks in advance

Sent from my iPhone using Tapatalk- faya baby!

Chuck33079 · 05-17-2013, 10:27 AM

Quote:

Originally Posted by faya

Hi! This is my first post on this thread. Anyone who has a kimber 1911? If you were to choose between custom eclipse target vs custom cdp II, what would it be? Thanks in advance

Sent from my iPhone using Tapatalk- faya baby!

I've never known anyone who's had a good experience with a Kimber. I'd rather have a loaded Springfield for less money, or step up to something like a Les Baer or Dan Wesson.

UNKNOWN_370 · 05-17-2013, 11:08 AM

Quote:

Originally Posted by MacCool

After registering the firearm with the Federal Government by filling out the 4473, of course.

Texas is one state where a NICS check isn't required of people with a CHL. Despite Texas' otherwise mildly restrictive handgun laws, skipping NICS is "common sense" IMHO if you've already undergone a background check for the CHL.

Exactly, and any infraction, the first thing you lose is your CHL. So here, you gotta walk straight like an arrow.

faya · 05-17-2013, 02:57 PM

Quote:

Originally Posted by Chuck33079

I've never known anyone who's had a good experience with a Kimber. I'd rather have a loaded Springfield for less money, or step up to something like a Les Baer or Dan Wesson.

Okay, thanks!

that sounds a good help. More thoughts are welcome!

Sent from my iPhone using Tapatalk- faya baby!

FireDan50 · 05-17-2013, 04:24 PM

Finally got my foregrip rail from Israel...I'm probably going to change this set up later.

Chuck33079 · 05-17-2013, 05:36 PM

Quote:

Originally Posted by faya

Okay, thanks!

that sounds a good help. More thoughts are welcome!

How much are you looking to spend? What are you using it for? A 1911 is tough to conceal if you're looking for a carry piece. If you go with less than a 4" barrel, reliability becomes a concern. If I was going for a self defense pistol, I'd look at springfield or rock river. That should get you out the door for $700-1000. Run it by a local pistol smith for a trigger job and some polishing, and you've got a better pistol than a Kimber.

faya · 05-17-2013, 06:20 PM

Quote:

Originally Posted by Chuck33079

How much are you looking to spend? What are you using it for? A 1911 is tough to conceal if you're looking for a carry piece. If you go with less than a 4" barrel, reliability becomes a concern. If I was going for a self defense pistol, I'd look at springfield or rock river. That should get you out the door for $700-1000. Run it by a local pistol smith for a trigger job and some polishing, and you've got a better pistol than a Kimber.

I can go 1500 max. Just something to play around in the range. I would not really bring it around. I have no enemies. I am not looking for one either.

i just want something that us reliable and you can be proud of.. Thanks Sir!

Sent from my iPhone using Tapatalk- faya baby!

Chuck33079 · 05-17-2013, 06:24 PM

A Colt Gold Cup wouldn't be too bad either in that price range. Unless you spend $2k on one, they'll all need a pistol smith to polish some stuff and clean up the trigger.

faya · 05-17-2013, 06:39 PM

Quote:

Originally Posted by Chuck33079

A Colt Gold Cup wouldn't be too bad either in that price range. Unless you spend $2k on one, they'll all need a pistol smith to polish some stuff and clean up the trigger.

$2k would be too much for me.

colt gold cup is pretty sharp too. Overall, what manufacturer do you recommend when it comes to reliability?

Sent from my iPhone using Tapatalk- faya baby!

UNKNOWN_370 · 05-17-2013, 07:23 PM

Quote:

Originally Posted by faya

$2k would be too much for me.

colt gold cup is pretty sharp too. Overall, what manufacturer do you recommend when it comes to reliability?

Sent from my iPhone using Tapatalk- faya baby!

You need to do a looooot of reading on 1911's. Advice will be extremely subjective and Bias. But, what i can tell you. The best, most reliable 1911's are the ones that you order from world famous gunsmiths and wait for because they are being hand built.

Buying an expensive factory produced 1911 doesn't guarantee reliability.

Chuck33079 · 05-17-2013, 07:59 PM

Quote:

Originally Posted by UNKNOWN_370

You need to do a looooot of reading on 1911's. Advice will be extremely subjective and Bias. But, what i can tell you. The best, most reliable 1911's are the ones that you order from world famous gunsmiths and wait for because they are being hand built.

Buying an expensive factory produced 1911 doesn't guarantee reliability.

Every bit of this. My Les Baer bullseye gun is a work of art. Always feeds, always fires, and shoots a 1" group at 50 yds from a rest with hand loads. The price was on a level with the performance. For a budget 1911, I stand by a Springfield, RRA or colt. Whatever you choose, budget a couple hundred for a gunsmith to tune it up.

05-14-2013, 09:46 AM	#3196 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29540	Yeah, there's paperwork. Takes 5 minutes. You're exactly right on the chl replacing the need for a NICS check. You've already proven you have a clean record, why waste the effort to repeat the process. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

05-17-2013, 10:22 AM	#3200 (permalink)
faya Enthusiast Member Join Date: Dec 2012 Location: Central Florida Posts: 360 Drives: 13 370z nismo Rep Power: 14	Hi! This is my first post on this thread. Anyone who has a kimber 1911? If you were to choose between custom eclipse target vs custom cdp II, what would it be? Thanks in advance Sent from my iPhone using Tapatalk- faya baby! __________________ H&R / Swift Spec-R / Fast Intentions

05-17-2013, 04:24 PM	#3204 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 21	Finally got my foregrip rail from Israel...I'm probably going to change this set up later. faya likes this.

05-17-2013, 06:24 PM	#3207 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29540	A Colt Gold Cup wouldn't be too bad either in that price range. Unless you spend $2k on one, they'll all need a pistol smith to polish some stuff and clean up the trigger. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

05-15-2013, 03:20 PM	#3197 (permalink)
Cell A True Z Fanatic Join Date: Jan 2010 Location: Chicago Posts: 1,449 Drives: A Garbage Truck Rep Power: 23	no one has an opinion on DSarms? That unpopular?